Top » Catalog » Micromot tools » Grinding and Polishing Machine » 28520

€104.00 + VAT

Delta sander OZI/E
[28520]

Small yet efficient sander!

For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. The oscillating motion ensures quiet operation and also facilitates cutting. Insert and file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Complete with 4 sanding discs (2x 80 grit, 1x 150 grit and 1x 240 grit). In an attractive case.

Technical data:
220 - 240V. 100W. Sanding frequency of 3,000 - 10,000rpm. Length 230mm. Weight 550g. Insulated to class 2.

Reviews

Customers who bought this product also purchased

sandpaper for PS 13 Grit 240	Sanding pads for OZI 220/E grit 80	sandpaper for PS 13 Grot 180
Sanding pads for OZI 220/E grit 240	Pensander PS 13	Sanding pads for OZI 220/E grit 150

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Super safety and specialty bit set, 75-piece
2 x	Super-fine sanding discs grain 000
1 x	Sanding fleece for LWS
1 x	Polishing machine PM 100
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Super-fine sanding discs grain 400
1 x	Three jaw chuck for the lathe DB 250
1 x	Dial gauge
1 x	Cylinder sander WAS/E
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Microfibre cloth
1 x	Four Jaw Chuck
1 x	Gear Chuck
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Insulation Resistance Tester MG500
1 x	Edge cutter with pin 6.4mm
2 x	Grinding mop cylinder grit 120
1 x	Diamond-coated cutting disc for MIC
1 x	Grinding and Polishing Machine SP/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Precision magnetic gauge stand
1 x	Backing disc for LWS
2 x	Grinding mop cylinder grit 120
1 x	Lambswool polishing disc
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Jig saw blades made of HSS
1 x	Inspector mirror
1 x	Multipurpose Vices Primus 75
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Disc Sander TG 250/E
1 x	Independent four jaw chuck for the DB 250
1 x	Precision caliper square
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Screwdriver bit set. 49-piece.
1 x	Insulation Resistance Tester MG125
1 x	Disc Sander TG 125/E
1 x	Steel tape measure
1 x	Corundum grinding disc for LWS
1 x	Tungsten Carbide Tipped (TCT)
1 x	Grinding mop cylinder grit 240
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x
1 x	Precision caliper 500mm
1 x	Diamond-coated cutting and roughing disc
1 x	Warding files set, 6pcs
1 x	Machine Vice MS 4
1 x	Collet Set for accurate use on round components
1 x	Blade holders for DS 460
1 x	Rounding over cutter 6.4mm
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
1 x	Precision steel vice PM 40
1 x	Multipurpose Vices Primus100
1 x	Radius Cutting Attachment, complete with pointed tool

€3,002.95