Top » Catalog » Micromot tools » Grinding and Polishing Machine » 28560

€119.92 + VAT

Cylinder sander WAS/E
[28560]

For grinding and finishing steel, non-ferrous metals and stainless steel surfaces. For grinding, brushing, satin finishing, but also cleaning. With compact grinding mop cylinder (Ø 50 x 30mm). Balanced special DC motor with infinitely variable speed control for material-specific working and constant speed even at high grinding pressure. Gear head made of die-cast aluminium, main housing of glass-fibre reinforced POLYAMIDE. With satin finishing roller „medium“ and each one grinding mop cylinder 120 grit and 240 grit. In high-quality case, as described below. Technical data: 230V. 100W. Spindle speeds 800 - 2,800/min. Length 270mm. Weight 900g. Insulated to class 2.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Super safety and specialty bit set, 75-piece
2 x	Super-fine sanding discs grain 000
1 x	Sanding fleece for LWS
1 x	Polishing machine PM 100
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Super-fine sanding discs grain 400
1 x	Three jaw chuck for the lathe DB 250
1 x	Dial gauge
1 x	Cylinder sander WAS/E
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Microfibre cloth
1 x	Four Jaw Chuck
1 x	Gear Chuck
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Insulation Resistance Tester MG500
1 x	Edge cutter with pin 6.4mm
2 x	Grinding mop cylinder grit 120
1 x	Diamond-coated cutting disc for MIC
1 x	Grinding and Polishing Machine SP/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Precision magnetic gauge stand
1 x	Backing disc for LWS
2 x	Grinding mop cylinder grit 120
1 x	Lambswool polishing disc
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Jig saw blades made of HSS
1 x	Inspector mirror
1 x	Multipurpose Vices Primus 75
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Disc Sander TG 250/E
1 x	Independent four jaw chuck for the DB 250
1 x	Precision caliper square
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Screwdriver bit set. 49-piece.
1 x	Insulation Resistance Tester MG125
1 x	Disc Sander TG 125/E
1 x	Steel tape measure
1 x	Corundum grinding disc for LWS
1 x	Tungsten Carbide Tipped (TCT)
1 x	Grinding mop cylinder grit 240
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x
1 x	Precision caliper 500mm
1 x	Diamond-coated cutting and roughing disc
1 x	Warding files set, 6pcs
1 x	Machine Vice MS 4
1 x	Collet Set for accurate use on round components
1 x	Blade holders for DS 460
1 x	Rounding over cutter 6.4mm

€2,824.95