€295.00 + VAT

Insulation Resistance Tester MG500
[MG500]

Insulation Resistance Tester MG500

Allows you to measure insulation resistance more safely by avoiding operation mistakes!!

Hot-line state detection
In any range (MΩ), the hot-line state (30 V minimum) can be detected through the buzzer sound and the red LED illumination. If you press the MEASURE button by mistake in this state, no test voltage will be generated. Thus, the measuring circuit and the equipment involved will not be affected adversely.

Large bolt mark
During the measurement of MΩ, a large bolt mark is illuminated on the LCD with the buzzer sound, allowing you to find that voltage is generated.

More ingenuity
To select the highest test voltage range, you need to turn the rotary switch while holding down the 0Ω ADJ button. This design feature prevents the highest test voltage from being generated by an operation mistake.

Easy to use & tough body
An easy-to-hold body with a portrait design has been adopted to ensure stable measurements. The tester comes with a strap, and uses less slippery elastomeric material for its lateral sides so that the user can grip the tester more firmly.

Automatic data hold
After measurements have been finished, the last measured value can be held automatically. Unlike an analog tester, you do not need to check the reading during measurements and therefore can comfortably concentrate on the object under measurement.

Bargraph just like analog meter
A large logarithmic bar graph is provided to enable the user to check the measured value like using an analog tester.

Large display with backlight
The backlight allows you to check the measured value even in a dark place. Since the rated voltage output can be checked with the green LED, you can find whether the measurement is being carried out properly.

General Specification

MG500 


Reviews
Manufacturers
1 x Fixed Steady
1 x Tool holder for rotary tools
1 x Hot wire cutter THERMOCUT 12/E
1 x MICROFLAME burner MFB/E
1 x Disc Sander TG 250/E
1 x Machine Vice MS 4
1 x Disc Sander TG 125/E
1 x Universal and oil siphoning pump AP 12
1 x Router base OFV
1 x Corundum sanding discs for LWS
2 x Engraving tool GG
1 x Hot wire cutter THERMOCUT 230/E
1 x Slot cutter 5.0mm
1 x Corundum fan sander for LWS
1 x Jig saw blades made of HSS
1 x Half round cutter 13mm
1 x Drill chuck with sliding sleeve for the tailstock
1 x Rebating cutter 6.4mm
1 x Tungstein carbide rasp - and cutting disc
1 x MICROFLAM gas soldering set MGS
1 x MICRO Heat gun MH 550
1 x Compact workshop vacuum cleaner CW-matic
1 x Corundum grinding disc for LWS
1 x Diamond Coated
1 x Glass fibre contact cleaner brush
1 x Sanding fleece for LWS
1 x Supercut jig saw blades of special steel
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
2 x Pensander PS 13
1 x PLCC Puller
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Belt sander BS/E
1 x Multipurpose Vices Primus 75
1 x Combi cutter 6.5/2.5mm
1 x Tungsten Carbide Tipped (TCT)
1 x Independent four jaw chuck for the DB 250
1 x Four Jaw Chuck
1 x Universal holder UHZ
1 x Gear Chuck
1 x Inspector mirror
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Centre Turning Attachment
1 x MICROMOT Mains Adapter NG 5/E
1 x Flap Wheels
1 x Angle cutter 45 °
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Aluminium Die-Cast
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Fine dust paper filter for CW-matic
€2,038.80
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
SANWA-METER
SANWA-METER Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook