Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Five piece HSS chisel set
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Glass fibre contact cleaner brush
1 x	Cotton polishers
1 x	Inpection mirror 1-978
1 x	Lambswool polishing disc
1 x	Sanding Drums
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	sandpaper for PS 13 Grit 400
1 x	Special Fused Alumina (Hardness N).
1 x	Fibre-Cut Discs
1 x	Super-fine sanding discs grain 2000
1 x	Super-Cut
1 x	Flexishaft MICROMOT 110/P
1 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Centre Turning Attachment
1 x	Micro Compound Table KT 70
1 x	Diamond-coated cutting and roughing disc
1 x	ESD Tweezers 5-193
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Broca de alta duração de 3.0mm
1 x	Disc Sander TG 125/E
1 x	6-piece TORX-screwdriver-set
1 x	Broca de alta duração de 2.1mm
1 x	Cylinder shaped milling cutters
1 x	Contact bracelet with spiral cord
1 x	Fibre-Cut Discs
1 x	Replacement carving blades for MSG
1 x	Tungsten carbide cutters set
1 x	Independent four jaw chuck for the DB 250
1 x	6-piece screwdriver and cross-recess set
1 x	Disc Sander TG 250/E
1 x	Floor cover ESD
1 x	Gear Chuck
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	IC Test clip 20 pins
1 x	Warding files set, 6pcs
1 x	Edge cutter with pin 6.4mm
1 x	Professional polishing sponge
1 x	Sanding fleece for LWS
1 x	Cutting disc, with reinforcement
1 x	Three jaw chuck for the lathe DB 250
1 x	Dividing attachment TA 230 for PF 250

€1,754.04