Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Rounding over cutter 6.4mm
1 x	IC tweezers
2 x	Insulation Resistance Tester MG500
1 x	HSS immersion saw blades for OZI
1 x	MICRO Miller FF 230
1 x	6-piece screwdriver and cross-recess set
1 x	10-piece wood router cutter set
1 x	V-slot cutter 6.5mm
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Table Sawr TKS 315 E
1 x	Wood Lathe DB900
2 x	Vacum SAA 901
1 x	Delta sander OZI/E
1 x	BIT-SET
1 x	Independent four jaw chuck for the DB 250
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x
2 x	Table Saw TKS 2500 SC
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Broca de ponto 3.15 x 1.25
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Disc Sander TG 250/E
1 x	Precision lathe PD 250/E
1 x	Tungstein carbide rasp - and cutting disc
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement glue sticks for HKP 220
1 x	Insert CCGT060202-AK
1 x	6-piece screwdriver and cross-recess set
1 x	Corundum fan sander for LWS
1 x	Edge cutter with pin 6.4mm
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	surface planing and thicknessing ADH 200
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Bottom PSOP44 NOR-3
1 x	PLCC Puller
1 x	surface planing and thicknessing ADH 250
1 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Slot cutter 6.5mm
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Long neck straight drill/grinder LB/E
1 x	Hand Magnifier 2-293
1 x	Warding files set, 6pcs
1 x	HSS immersion saw blades for OZI
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Super-Cut
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Rebating cutter 6.4mm
1 x	Sanding pads for OZI 220/E grit 80
1 x	Sanding pads for OZI 220/E grit 240
1 x	Tungsten Carbide Tipped (TCT)
1 x	Sanding fleece for LWS
1 x	Corundum grinding disc for LWS
1 x	Five piece HSS chisel set
1 x	Insulation Resistance Tester MG125
1 x	Precision drill grinder FBS 12/EF
1 x	Diamond cutting blade for OZI
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICROMOT 50/EF
1 x	Three jaw chuck for the lathe DB 250
1 x	Backing disc for LWS
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Corundum fan sander for LWS
1 x	Angle polisher WP/E
1 x	SCLCR1010E06
1 x	Replacement belts for BSL 220/E
1 x	Cutting disc, with reinforcement
1 x	Angle cutter 45 °
1 x	Combi cutter 6.5/2.5mm

€13,696.34