Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Disc cutters
1 x	High quality corundum grinding bits
1 x	Complete Engraving Kit with trial glass
2 x	Router base OFV
3 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Engraving tool GG
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	MICRO Miller FF 230
1 x	Lathe System PD 400
1 x	Tungsten carbide cutter 1.0mm
2 x	MICROMOT 230/E
3 x	Hot wire cutter THERMOCUT 12/E
3 x	MICRO Heat gun MH 550
3 x	MICROMOT 50/EF
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Bench drill press TBH
3 x	Hot wire cutter THERMOCUT 230/E
1 x	Set of precision cutters
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	Universal holder UHZ
1 x	MICRO Miller MF 70
1 x	Stainless steel brushes
1 x	Bench drill machine TBM 220
1 x	Precision drill grinder FBS 12/EF
1 x	Tungsten carbide drills Ø1mm
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Conjunto de três brocas de ponto
1 x	HSS drill bits 0.8mm
1 x	Brass brushes
1 x	Flexible silicon discs
1 x	HSS twist drill set to DIN 338
1 x	Steel cups
2 x	Diamond Cutting Discs
1 x	Felt polishers
1 x	Flexible polishing pad set
1 x	Grinding mop cylinder grit 80
1 x	Cotton polishers
2 x	MICROFLAM gas soldering set MGS
1 x	Tungsten carbide drills Ø2mm
1 x	Felt polishers
1 x	Diamond Cutting Discs
1 x	MICROMOT 50/E
1 x	Sanding Drums
1 x	Diamond Grinding Bits 5mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Sanding Discs
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	Sanding bands 14x13mm
1 x	Sanding Drums
1 x	Broca de alta duração de 3.0mm
1 x	sanding belts for BBS/s Grit 240
1 x	Lathe tools 10mm pastilhados
1 x	Sanding Drums
1 x	Sanding bands 14x13mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Rebating cutter 6.4mm
2 x	Screwdriver bit set. 49-piece.
1 x	Long neck straight drill/grinder LB/E
1 x	Mill/Drill System BFW 40/E
1 x	Polishing machine PM 100
1 x	Precision Drill/Grinder FBS 240/E
1 x	Super safety and specialty bit set, 75-piece
1 x	Slot cutter 6.5mm
1 x	MICROMOT 50
1 x	Rounding over cutter 6.4mm
1 x	Half round cutter 13mm
1 x	Combi cutter 6.5/2.5mm
1 x	10-piece wood router cutter set

€6,936.90