Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Rounding over cutter 6.4mm
1 x	Grinding mop cylinder grit 240
1 x	MICRO-screwdrivers
1 x	Three jaw chuck for the lathe DB 250
1 x	Slot cutter 6.5mm
1 x	Jig saw blades made of HSS
1 x	Inpection mirror 1-978
1 x	MICROFLAM gas soldering set MGS
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Crimping plier for BNC
1 x	Angle polisher WP/E
1 x	V-slot cutter 6.5mm
1 x	Machine Vice MS 4
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Belt sander BS/E
1 x	Chuck for TBM 220
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Replacement glue sticks for HKP 220
2 x	Step clamps made of steel
1 x	Diamond Coated
1 x	Slot cutter 5.0mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Half round cutter 13mm
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	MICROFLAME burner MFB/E
1 x	Long neck angle grinder LHW
1 x	Multiform grindstone
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Universal holder UHZ
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Supercut jig saw blades of special steel
1 x	Edge cutter with pin 6.4mm
1 x	Angle cutter 45 °
1 x	Disc Sander TG 250/E
1 x	Complete Engraving Kit with trial glass
1 x	Blade for Wood and Plastics
1 x	Delta sander OZI/E
1 x	Independent four jaw chuck for the DB 250
1 x	Grinding mop cylinder grit 80
1 x	MICRO Heat gun MH 550
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Pensander PS 13
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Inspector mirror
1 x	MICROMOT glue gun HKP 220
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Super-Cut
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Tungsten carbide cutters set
1 x	Dividing attachment TA 230 for PF 250
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Insulation Resistance Tester MG500
1 x	Core box bit 3.2mm
1 x	Engraving tool GG
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Precision steel vice PM 40
1 x	Three-jaw steel drill chuck
1 x	Blade for Steel and brass
1 x	Fluted filter for CW-matic
1 x	Polishing Set
1 x	Professional polishing sponge
1 x	sanding belts for BBS/s Grit 240
1 x	Micro Compound Table KT 70
1 x	Scroll saw DS 230/E
1 x	Hot wire cutter THERMOCUT 650
1 x	Bench drill press TBH
1 x	sandpaper for PS 13 Grot 180
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Precision Vice FMS 75
1 x	Super-fine sanding discs grain 400
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Mill/Drill System BFW 40/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Universal and oil siphoning pump AP 12
1 x	Spiral blade. 125mm long with plain ends (without pins).

€3,747.64