Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Blade holders for DS 460
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT drill stand MB 200
1 x	Professional set for finish grinding and polishing
1 x	Five piece HSS chisel set
1 x	MICRO Miller FF 500
2 x	Broca de alta duração de 2.2mm
2 x	Corundum fan sander for LWS
2 x	Three jaw chuck for the lathe DB 250
1 x	Diamond Grinding Bits 1mm
1 x	Grinding mop cylinder grit 240
1 x	14-piece parallel supports set
1 x	Multiform grindstone
1 x	MICROMOT extension cord. 300cm.
1 x	Replacement belts for BSL 220/E
1 x	Micro Compound Table KT 70
1 x	Diamond Grinding Bits 5mm
1 x	Blade for Steel and brass
2 x	Replacement belts for BSL 220/E
1 x	Cylinder sander WAS/E
1 x	Footswitch FS
1 x	Mill/Drill Unit BFB 2000.
1 x	Dividing attachment TA 230 for PF 250
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Independent four jaw chuck for the DB 250
1 x	Broca de alta duração de 2.8mm
1 x	Replacement carving blades for MSG
1 x	Ball-shaped diamond coated 2.2mm
1 x	Broca de alta duração de 2.6mm
1 x	Diamond blade for MBS 240/E
1 x	Ball-shaped diamond coated 3.2mm
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Broca de alta duração de 2.1mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Diamond Grinding Bits 1,8mm
1 x	Aluminium Die-Cast
1 x	MICROMOT steel collet set
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	MICRO Miller FF 230
1 x	Diamond-coated cutting and roughing disc
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Broca de alta duração de 2.4mm
1 x	Flexishaft MICROMOT 110/BF
1 x	MICROMOT tool holder
1 x	Broca de alta duração de 2.9mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Tungstein carbide rasp - and cutting disc
1 x	Cutting disc, with reinforcement
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x
1 x	Broca de alta duração de 2.7mm
1 x	Grinding mop cylinder grit 80
1 x	sandpaper for PS 13 Grit 400
1 x	Protective device for hand-operated MICROMOT
1 x	Universal polishing paste
1 x	MICRO cutter MIC
1 x	Broca de alta duração de 2.3mm
1 x	Jig saw blades made of HSS
1 x	Wire strippers 165mm
1 x	Precision drill grinder FBS 12/EF
1 x	Flat nose pliers 185mm
1 x	Centre Turning Attachment
1 x	Bench drill machine TBM 220
1 x	Corundum sanding discs for LWS
1 x	Flexible silicon discs
1 x	Contact bracelet with spiral cord
1 x	EUROline mini side cutter
1 x	Super-Cut
1 x	Broca de alta duração de 1.4mm
1 x	Corundum grinding disc for LWS
1 x	Broca de alta duração de 0.9mm
1 x	Bench Circular Saw KS 230
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	3-jaw chuck centrically clamping 125mm
1 x	Morse taper MT2 - B16
1 x	Combination pliers 170mm
1 x	Half round cutter 13mm
1 x	Diamond-coated cutting disc for MIC
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	Broca de alta duração de 2.5mm
1 x	Rounding over cutter 6.4mm
1 x	Side cutters 160mm

€5,265.61