Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Wheels brushes
1 x	MICROFLAM gas soldering set MGS
1 x	MICROFLAME burner MFB/E
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Cylinder sander WAS/E
1 x	Bench Circular Saw KS 230
1 x	Tungsten carbide drills Ø1,5mm
1 x	PLCC Extractor
1 x	Motor-driven carving device MSG
1 x	Polishing machine PM 100
1 x	HSS twist drill set with centring pin
1 x	Inpection mirror 1-978
1 x	MICROMOT glue gun HKP 220
1 x	High quality corundum grinding bits
2 x	Cups brushes
1 x	MICRO shaper MP 400
1 x	IC tweezers
1 x	HSS drill bits 0.5mm
1 x	Conjunto de três brocas de ponto
1 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø1mm
1 x	MICRO-screwdrivers
2 x	Steel wheels
1 x	Angle polisher WP/E
1 x	Crimping plier for BNC
1 x	MICRO woodturning lathe DB 250
1 x	Belt sander BBS/S
1 x	MICRO Heat gun MH 550
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Belt sander BS/E
1 x	Jig saw STS 12/E
1 x	Inspector mirror
1 x	Grinding and Polishing Machine SP/E
1 x	HSS drill bits 0.8mm
1 x	Delta sander OZI/E
3 x	Stainless steel wheels
1 x	MICRO Band Saw MBS 240/E
1 x	Engraving tool GG
1 x	High quality corundum grinding bits
2 x	Stainless steel cups
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Hot wire cutter THERMOCUT 230/E
2 x	Stainless steel brushes
1 x	Lever Dial Indicator
1 x	Diamond Grinding Bits 5mm
1 x	Brass brushes
1 x	Cylinder shaped milling cutters
2 x	Diamond Cutting Discs
1 x	Diamond Twist Drills
1 x	Diamond Cutting Discs
1 x	Milling cutter set (2 - 5mm)
1 x	Professional set for finish grinding and polishing
1 x	magnetic base 80kg
1 x	Glass fibre contact cleaner brush
1 x	Hot wire cutter THERMOCUT 650
1 x	Super-fine sanding discs grain 000
2 x	Steel cups
1 x	Precision caliper 500mm
1 x	Flame shaped milling cutters
1 x	Steel brushes
1 x	Tungsten carbide cutters set
1 x	Diamond Grinding Bits 1mm
1 x	Steel tape measure
1 x	Tungsten carbide cutter 2.0mm
1 x	Cone shaped milling cutter
1 x	Diamond Grinding Bits 1,8mm
1 x	Grinding mop cylinder grit 240
1 x	Set of precision cutters
1 x	Grinding mop cylinder grit 120
1 x	Digital caliper gauge 300 mm
1 x	Solid carbide stylus for engraving
1 x	Dial gauge
1 x	Ball-shaped diamond coated 1.2mm
1 x	Edge cutter with pin 6.4mm
1 x	MICRO Miller FF 230
1 x	Sanding Discs
1 x	Fibre-Cut Discs
1 x	Flexible polishing pad set
1 x	Fibre-Cut Discs
1 x	Long neck straight drill/grinder LB/E
1 x	Sanding Drums

€4,113.15