Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Sanding pads for OZI 220/E grit 150
1 x	Precision caliper square
1 x	Spare cutting wire
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Blade holders for DS 460
1 x	Tungstein carbide rasp - and cutting disc
1 x	surface planing and thicknessing ADH 250
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	HSS immersion saw blades for OZI
2 x	Steel tape measure
1 x	Sanding fleece for LWS
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Diamond-coated cutting disc for MIC
1 x	HSS cutting blade for OZI
1 x	Tungsten Carbide Tipped (TCT)
1 x	Angle cutter 45 °
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Collet Set for accurate use on round components
1 x	Three-jaw steel drill chuck
1 x	Lever Dial Indicator
1 x	Super-fine sanding discs grain 000
1 x	Three jaw chuck for the lathe DB 250
1 x	sandpaper for PS 13 Grit 240
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	sandpaper for PS 13 Grot 180
1 x	Precision steel vice PM 40
1 x	Centre Turning Attachment
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Aluminium Die-Cast
1 x	Professional set for finish grinding and polishing
1 x	Precision magnetic gauge stand
1 x	Gear Chuck
1 x	IC Test clip 20 pins
1 x	Insulation Resistance Tester MG125
1 x	PLCC Puller
1 x	Self-adhesive white corundum sanding discs for TG 250/E

€2,316.96