Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Replacement cutting disc for MICRO cutter MIC
3 x	MICROMOT Mains Adapter NG 2/S
1 x	Crosscut 'Super-Cut' blade
1 x	Hand Magnifier 2-293
1 x	Gear Chuck
1 x	EUROline side cutter rounded head
1 x	Dial gauge
1 x	Digital caliper gauge 300 mm
3 x	Diamond blade
1 x	Broca de alta duração de 2.9mm
2 x	Mill/Drill System BFW 40/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	MICRO Miller FF 500
1 x	Diamond-coated cutting disc for MIC
1 x	magnetic base 80kg
1 x	Tungsten Carbide Tipped (TCT)
1 x	Combination pliers 190mm
1 x	Five piece HSS chisel set
1 x	Combination pliers 205mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Safety insulated screwdrivers 14-603 VDE
2 x	Table Saw TKS 2500 SC
1 x	Grinding mop cylinder grit 80
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Tungsten carbide cutters set
2 x	Steel tape measure
1 x	Table Sawr TKS 315 E
1 x	Telephon pliers bent 200mm
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Antiallergical Tweezers 5-117-1
1 x	Telephone pliers bent 205mm
1 x	Precision steel vice PM 40
1 x	Insulation Resistance Tester MG125
1 x	Professional set for finish grinding and polishing
1 x	SILICONE 200ml
1 x	SMD Tweezers 5-062
1 x	IC tweezers
1 x	SMD Tweezers 5-052
1 x	PROTECTION 200ml
1 x	Solid carbide saw blade
1 x	precision machine vices FMS125
2 x	PLCC Extractor
1 x	MICROMOT Mains Adapter NG 5/E
1 x	ESD Brushe
1 x	precision machine vices FMS150
2 x	Safety insulated screwdrivers 14-604 VDE
2 x	Tungsten tipped saw blade
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	PROLUB 200ml
1 x	SMD Tweezers 5-058
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	PLCC Puller
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	VASELINE 200ml
1 x	Side cutters 160mm
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	SMD Tweezers 5-071
1 x	TIP SPT-3
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Grinding mop cylinder grit 120
1 x	Safety insulated screwdrivers 14-606 VDE
1 x	Warding files set, 6pcs
1 x	Super-fine sanding discs grain 2000

€8,647.95