Top » Catalog » Lathes » Proxxon Lathes » 24002

€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Step clamps made of steel
2 x	Professional Drill/Grinder IBS/E
2 x	Dial gauge
2 x	Universal polishing paste
1 x	Inspector mirror
1 x	Disc Sander TG 125/E
2 x	MICROMOT 50
1 x	Broca de alta duração de 1.1mm
2 x	MICRO Miller MF 70
1 x	HSS immersion saw blades for OZI
1 x	PLCC Extractor
3 x	Micro Compound Table KT 70
2 x	Disc Sander TG 250/E
1 x	magnetic base 80kg
1 x	Follow rest for D250X550
2 x	Insulation Resistance Tester MG500
1 x	Glass fibre contact cleaner brush
1 x	Diamond Cutting Discs
1 x	HSS drill bits 1.6mm
2 x	14-piece parallel supports set
1 x	Flexishaft MICROMOT 110/BF
2 x	MICROMOT 230/E
1 x	Belt sander BBS/S
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Mill/Drill System BFW 40/E
1 x	Grinding mop cylinder grit 80
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Three jaw chuck for the lathe DB 250
1 x	Broca de alta duração de 0.9mm
2 x	MICROMOT Mains Adapter NG 2/E
1 x	Corundum grinding disc for LWS
1 x	Grinding mop cylinder grit 120
4 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	PROLUB 200ml
2 x	Diamond Grinding Bits 1,8mm
1 x	Blade for Steel and brass
1 x	Hand magnifier with LED light 3X
1 x	Wheels brushes
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Collet chuck ER25 for D250X550
1 x	MICRO Miller FF 230
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD Tweezers 5-191
2 x	Polishing Set
2 x	Tungstein carbide rasp - and cutting disc
1 x	Sanding pads for OZI 220/E grit 80
1 x	Jig saw STS 12/E
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	6-piece socket wrenches ESD
1 x	Five piece HSS chisel set
2 x	MICRO Miller FF 500
1 x
1 x	Broca de alta duração de 0.5mm
1 x	Telephon pliers bent 200mm
1 x	Broca de alta duração de 2.0mm
1 x	Router base OFV
1 x	Brass contact cleaner brush
2 x	Grinding mop cylinder grit 120
1 x	End side cutters EUROline-Conductive
1 x	broca de alta duração de 0,2mm
1 x	Dividing attachment TA 230 for PF 250
1 x	centrically clamping 125mm
1 x	Chuck for TBM 220
2 x	Bench Circular Saw KS 230
1 x	Bench drill press TBH
1 x	Backing disc for LWS
2 x	Diamond Grinding Bits 1mm
1 x	Broca de alta duração de 1.3mm
1 x	Blade guides separately
1 x	Four Jaw Chuck
2 x	MICROMOT steel collet set
2 x	Angle polisher WP/E
1 x	Precision caliper square
1 x	EUROline end cutter
1 x	Broca de alta duração de 2.5mm
1 x	Plastic magnifying glass
1 x	EUROline top cutter
2 x	Lathe tools 10mm pastilhados
1 x	Crosscut 'Super-Cut' blade
2 x	Precision steel vice PM 40
1 x	Thicknesser DH 40
1 x	Diamond cutting blade for OZI
1 x	Precision caliper 500mm
2 x	Delta sander OZI/E
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	EUROline-Conductive set of pliers
2 x	Insulation Resistance Tester MG125
1 x	Earth wire
1 x	Glass fibre contact cleaner brush
1 x	Long neck angle grinder LHW
2 x	Aluminium Die-Cast
2 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	HSS drill bits 0.8mm
2 x	Tungsten carbide cutters set
1 x	Steel brushes
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Wood Lathe DB450
1 x	Silicon-Carbide.
1 x	Blade holders for DS 460
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	MICROMOT Mains Adapter NG 5/E
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Surface planer AH 80
2 x	Sanding fleece for LWS
1 x	Machine Vice MS 4
1 x	EUROline flat nose pliers
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Diamond blade
1 x	Ball-shaped diamond coated 2.2mm
1 x	SmartProg2
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Precision drill grinder FBS 12/EF
1 x	EUROline mini side cutter
1 x	MICROMOT extension cord. 300cm.
1 x	Tool holder type H for SWH 1-A
1 x	Table Saw TKS 2500 SC
1 x	PLCC Puller
2 x	Diamond Cutting Discs
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	HSS drill bits 0.5mm
1 x	Independent four jaw chuck for the DB 250
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Steady rest for D250X550
1 x	Ball-shaped diamond coated 3.2mm
1 x	Precision lathe PD 250/E
2 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Broca de ponto 6.30 x 2.50
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
2 x	Fine dust paper filter for CW-matic
1 x	Earth wire with dummy Schunko-plug
1 x	Precision Drill/Grinder FBS 240/E
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Corundum bound cutting disc for LWS
1 x	Broca de ponto 3.15 x 1.00
1 x	Cylindrical cutters
1 x	ESD Tweezers 5-192
2 x	Inpection mirror 1-978
1 x	Stainless steel wheels
1 x	Warding files set, 6pcs
1 x	Broca de alta duração de 0.3mm
1 x	Milling cutter set (6 - 10mm)
1 x	Blade for Wood and Plastics
1 x	machine base with shelves for D250X550
1 x	Combination pliers 205mm
1 x	Corundum sanding discs for LWS
1 x	Long neck straight drill/grinder LB/E
1 x	Replacement belts for BSL 220/E
1 x	Broca de ponto 8.00 x 3.15
1 x	quantum revolving center CM2
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Diamond Cutting Discs
1 x	EUROline mini side cutter
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Conj 5 pinças ESD
1 x	MICROMOT drill stand MB 200
1 x	Disc cutters
1 x	Magnetic base
1 x	Telephon pliers bent 160mm
1 x	Mill/Drill Unit BFB 2000.
1 x	Scroll saw DS 230/E
1 x	Lathe System PD 400
1 x	Footswitch FS
1 x	Sanding pads for OZI 220/E grit 150
1 x	Broca de alta duração de 0.4mm
1 x	Telephon pliers straight 160mm
1 x	HSS drill bits 1.0mm
1 x	Grinding mop cylinder grit 240
1 x	MICRO woodturning lathe DB 250
1 x	Cutting tool 10 mm
1 x	Multipurpose Vices Primus100
1 x	EUROline set of pliers
1 x	Side cutters 160mm
1 x	Table Sawr TKS 315 E
1 x	MICROMOT tool holder
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	6-piece set of ESD/EGB tweezers

€22,390.41