Top » Catalog » Lathes » Optimum Lathes » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Disc cutters
4 x Rounding over cutter 6.4mm
1 x Diamond Cutting Discs
1 x Tungsten carbide cutter 3.0mm
2 x Cotton polishers
2 x Steel brushes
3 x Felt polishers
2 x Flexible polishing pad set
3 x Pensander PS 13
1 x Slot cutter 3.2mm
1 x Flexible polishing pad set
3 x Cotton polishers
1 x Combination pliers 185mm
1 x Safety insulated screwdrivers 14-601 VDE
1 x Telephone pliers bent 205mm
1 x Combination pliers 205mm
1 x High quality corundum grinding bits
4 x Felt polishers
1 x Round nose pliers 165mm
3 x Felt polishers
1 x Combination pliers 210mm
1 x Grinding and Polishing Machine SP/E
1 x Telephon pliers straight 200mm
1 x Belt sander BBS/S
3 x Tungsten carbide cutters set
1 x Angle cutter 45 °
2 x Wolfram vanadium steel milling bits
2 x EUROline-Conductive set of pliers
3 x HSS twist drill set with centring pin
2 x Half round cutter 13mm
1 x Tungsten carbide drills Ø2mm
1 x centrically clamping 125mm
1 x quantum revolving center CM2
3 x Multipurpose Vices Primus 75
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Broca de ponto 8.00 x 3.15
3 x Precision Vice FMS 75
2 x Flat nose pliers 45º EUROline-Conductive
4 x Machine Vice MS 4
1 x Follow rest for D250X550
3 x HSS drill bits 1.0mm
2 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Lathe chuck flange for D250X550
1 x Hot wire cutter THERMOCUT 650
1 x Precision lathe PD 250/E
3 x TIP SPT-4
1 x Collet chuck ER25 for D250X550
2 x Super safety and specialty bit set, 75-piece
2 x Glass fibre contact cleaner brush
2 x HSS drill bits 0.8mm
1 x Titan Tweezers 5-036
2 x Slot cutter 5.0mm
1 x Titan Tweezers 5-037
2 x TIP SPT-10
1 x Mini side cutters EUROline-Conductive
2 x End side cutters 45º EUROline-Conductive
1 x TIP SPT-3
4 x TIP SPT-6
3 x Glass fibre contact cleaner brush
2 x Hot wire cutter THERMOCUT 230/E
2 x Snipe nose pliers 45º EUROline-Conductive
1 x Titan Tweezers 5-031
1 x Tungsten carbide drills Ø1,5mm
1 x 4-jaw chuck individually clamping 125mm
1 x Cutting tool 10 mm
1 x Titan Tweezers 5-035
3 x Conjunto de três brocas de ponto
1 x Snipe nose pliers 45º EUROline-Conductive
3 x Screwdriver bit set. 49-piece.
1 x Multipurpose Vices Primus100
2 x Precision Vice FMZ
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x lathe tools 10mm
2 x Brass contact cleaner brush
2 x Side cutters EUROline-Conductive
1 x Tool holder type H for SWH 1-A
2 x HSS twist drill set to DIN 338
1 x PVC-insulated tweezers 5-117-6
2 x TIP SPT-9
2 x Combi cutter 6.5/2.5mm
1 x Face clamping disc for D250X550
3 x Felt polishers
3 x Hot wire cutter THERMOCUT 12/E
1 x Floor cover ESD
1 x Morse taper MT2 - B16
3 x Cotton polishers
1 x PVC-insulated tweezers 5-107-6
1 x Mini side cutters EUROline-Conductive
1 x 3-jaw chuck centrically clamping 125mm
2 x Lathe System PD 400
1 x ESD-handling set
3 x HSS drill bits 0.5mm
1 x Broca de ponto 3.15 x 1.25
1 x Broca de ponto 6.30 x 2.50
1 x Round nose pliers 45º EUROline-Conductive
2 x Crimping plier for BNC
1 x TIP SPT-2
1 x PVC-insulated tweezers 5-121-6
2 x Rebating cutter 6.4mm
1 x Steady rest for D250X550
2 x HSS drill bits 1.6mm
1 x Lathe tools 10mm pastilhados
3 x sanding belts for BBS/s Grit 80
1 x Super-Cut
1 x Jig saw STS 12/E
1 x Long neck straight drill/grinder LB/E
2 x Sanding bands 14x13mm
1 x Fibre-Cut Discs
1 x MICRO Heat gun MH 550
1 x Polishing machine PM 100
1 x Grinding mop cylinder grit 120
1 x MICROMOT steel collet set
1 x sandpaper for PS 13 Grit 240
1 x Precision Drill/Grinder FBS 240/E
1 x Grinding mop cylinder grit 240
2 x sanding belts for BBS/s Grit 240
2 x Micro Compound Table KT 70
2 x Cut off/mitre saw KGS 80
4 x Chuck for TBM 220
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x HSS boring tool set, 6 pieces
2 x Step clamps made of steel
2 x Mill/Drill System BFW 40/E
1 x Flexible silicon discs
1 x Precision drill grinder FBS 12/EF
2 x Milling cutter set (2 - 5mm)
3 x Cutting tools of high quality cobalt HSS steel, ground
2 x MICRO Miller MF 70
1 x High quality corundum grinding bits
1 x Professional Drill/Grinder IBS/E
1 x Fixed Steady
3 x MICRO Miller FF 230
2 x Felt cloth polishing disc (100 x 15mm)
1 x Three piece thread cutting set
1 x Cups brushes
1 x HSS cutting blade for OZI
1 x Independent four jaw chuck for the DB 250
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Corundum fan sander for LWS
2 x Sanding Discs
1 x Steel cups
1 x Scroll saw DS 230/E
2 x Microfibre polishing wheel, 15-ply (100mm)
1 x Universal polishing paste
1 x V-slot cutter 6.5mm
1 x Fluted filter for CW-matic
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Slot cutter 6.5mm
3 x TU 2004V
1 x Sanding Drums
2 x Dividing attachment TA 230 for PF 250
1 x MICRO shaper MP 400
3 x Centre Turning Attachment
2 x High quality corundum grinding bits
1 x Fibre-Cut Discs
1 x MICROMOT Mains Adapter NG 2/S
1 x 14-piece parallel supports set
1 x Fine dust paper filter for CW-matic
2 x Sanding fleece for LWS
1 x Four Jaw Chuck
1 x Flexible silicon discs
1 x Super-fine sanding discs grain 2000
2 x 
2 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
4 x Replacement glue sticks for HKP 220
1 x Plastic magnifying glass
3 x Cutting tools of high quality cobalt HSS steel, ground
1 x Replacement belts for BSL 220/E
1 x Steel wheels
1 x Corundum bound cutting disc for LWS
1 x Grinding mop cylinder grit 120
1 x Sanding Discs
1 x MICROMOT 50/EF
2 x Bench drill press TBH
1 x High quality corundum grinding bits
2 x High quality corundum grinding bits
1 x Tweezer teflon-coated 5-021-9
1 x MICRO woodturning lathe DB 250
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x MICRO Miller FF 500
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Complete Engraving Kit with trial glass
1 x Corundum grinding disc for LWS
4 x CRIMPING PLIERS/WIRE STRIPPER
1 x Flexishaft MICROMOT 110/P
1 x Gear Chuck
3 x Fibre-Cut Discs
1 x Three jaw chuck for the lathe DB 250
1 x Collet Set for accurate use on round components
1 x Coarse-toothed (18 TPI per 25mm)
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Long neck angle milling/drilling unit LWB 220/E
2 x Brass brushes
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Drill chuck with sliding sleeve for the tailstock
3 x Fibre-Cut Discs
2 x Corundum grinding disc for LWS
1 x Metal Cutting Blades
2 x High quality corundum grinding bits
1 x Flexishaft MICROMOT 110/BF
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Five piece HSS chisel set
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Wheels brushes
1 x Blade for Wood and Plastics
1 x MICROMOT 50
2 x Flap Wheels
1 x Hand Magnifier 2-293
1 x Flap Wheels
2 x Lambswool polishing disc
1 x Aluminium Die-Cast
1 x Table Saw FET
3 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x Sanding Drums
1 x Flame shaped milling cutters
1 x MICROMOT extension cord. 300cm.
3 x TU 2404
1 x Replacement belts for BSL 220/E
1 x HSS drill bits 1.2mm
1 x Radius Cutting Attachment, complete with pointed tool
1 x Crosscut 'Super-Cut' blade
1 x Sanding bands 14x13mm
1 x MICROMOT 230/E
1 x Bench Circular Saw KS 230
1 x Sanding fleece for LWS
1 x TU 1503V
1 x Replacement carving blades for MSG
1 x Replacement cutting disc for MICRO cutter MIC
1 x sanding belts for BBS/s Grit 150
1 x Router base OFV
1 x Super-fine sanding discs grain 400
1 x Replacement belts for BSL 220/E
1 x MICROMOT Mains Adapter NG 2/E
1 x Corundum fan sander for LWS
1 x Jig saw blades made of HSS
1 x Cylinder shaped milling cutters
1 x Cutting disc, with reinforcement
€33,454.58
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Diamond-coated cutting and roughing disc
Diamond-coated cutting and roughing disc
€22.90
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online