2 x | MICROMOT Mains Adapter NG 2/E |
1 x | SPRAYFLON 200ml |
3 x | Three-jaw steel drill chuck |
1 x | IC Test clip 20 pins |
2 x | Fixed Steady |
2 x | Broca de alta duração de 0.4mm |
1 x | magnetic base 80kg |
4 x | Micro Compound Table KT 70 |
2 x | Steady rest for D250X550 |
2 x | Vacum SAA 901 |
1 x | VASELINE 200ml |
1 x | Snipe nose pliers 45º EUROline-Conductive |
2 x | Radius Cutting Attachment, complete with pointed tool |
3 x | Precision lathe PD 250/E |
1 x | PROTECTION 200ml |
2 x | Screwdriver bit set. 49-piece. |
2 x | Footswitch FS |
1 x | Side cutters EUROline-Conductive |
1 x | SCREEN 200ml |
2 x | Universal and oil siphoning pump AP 12 |
2 x | TU 2004V |
2 x | TU 1503V |
1 x | MULTI 200ml |
1 x | Broca de alta duração de 0.5mm |
3 x | 6-piece set of ESD/EGB tweezers |
2 x | MICROMOT extension cord. 300cm. |
2 x | Cutting disc, with reinforcement |
1 x | Broca de alta duração de 0.3mm |
1 x | PRINTER 200ml |
1 x | broca de alta duração de 0,2mm |
1 x | broca de alta duração de 0,6mm |
2 x | ESD Brushe |
1 x | Wood Lathe DB450 |
5 x | Tungsten Carbide Tipped (TCT) |
1 x | POLISHER 200ml |
1 x | Safety insulated screwdrivers 14-601 VDE |
3 x | Protective device for hand-operated MICROMOT |
1 x | Broca de alta duração de 2.7mm |
1 x | Turning inserts VCMT070204 |
1 x | PROLUB 200ml |
1 x | Multipurpose Vices Primus 75 |
1 x | Multiform grindstone |
1 x | Flexishaft MICROMOT 110/P |
1 x | FREEZER-TOP 200ml |
3 x | Four Jaw Chuck |
1 x | Replacement carving blades for MSG |
1 x | Digital caliper gauge 300 mm |
2 x | Universal polishing paste |
4 x | lathe tools 10mm |
1 x | Corundum grinding disc for LWS |
1 x | Polishing paste |
2 x | Professional set for finish grinding and polishing |
1 x | Centre Turning Attachment |
1 x | Felt polishers |
3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
2 x | Fine dust paper filter for CW-matic |
2 x | Coarse-toothed (10 TPI per 25mm) |
2 x | EUROline end cutter |
1 x | Crimping plier for BNC |
1 x | Hand magnifier with LED light 3X |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
3 x | Diamond Coated |
3 x | Conj 5 pinças ESD |
2 x | Chuck for TBM 220 |
1 x | V-slot cutter 6.5mm |
2 x | Felt polishers |
2 x | 6-piece TORX-screwdriver-set ESD |
1 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Flat nose pliers 165mm |
2 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Telephone pliers bent 205mm |
1 x | Replacement belts for BSL 220/E |
2 x | Edge cutter with pin 6.4mm |
1 x | Titan Tweezers 5-036 |
2 x | SMD Tweezers 5-058 |
1 x | Collet chuck ER32 for D250X550 |
2 x | Diamond cutting blade for OZI |
3 x | Cotton polishers |
1 x | Felt polishers |
3 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Polishing felt, medium hard |
3 x | ESD Tweezers 5-192 |
1 x | Jig saw blades made of HSS |
2 x | Professional polishing sponge |
1 x | precision machine vices FMS200 |
1 x | Flexible silicon discs |
1 x | MICROMOT 230/E |
1 x | SMD Tweezers 5-075 |
2 x | Boring Bar for DCMT 10mm |
4 x | ESD Tweezers 5-194 |
2 x | Boring Bar for CCMT 8mm |
1 x | EUROline side cutter rounded head |
1 x | Boring Bar for CCMT |
1 x | Corundum grinding disc for LWS |
3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Sanding fleece for LWS |
1 x | Dividing attachment TA 230 for PF 250 |
2 x | Core box bit 3.2mm |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | SMD Tweezers 5-071 |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
3 x | ESD Tweezers 5-193 |
1 x | Replacement cutting disc for MICRO cutter MIC |
2 x | Microfibre cloth |
1 x | 3-jaw chuck centrically clamping 125mm |
1 x | Replacement belts for BSL 220/E |
2 x | Half round cutter 13mm |
1 x | Corundum sanding discs for LWS |
1 x | Sanding pads for OZI 220/E grit 240 |
3 x | Super-Cut |
1 x | Warding files set, 6pcs |
3 x | ESD Tweezers 5-195 |
1 x | Angle cutter 45 ° |
1 x | Component tweezers 5-006 |
2 x | Slot cutter 3.2mm |
2 x | Backing disc for LWS |
2 x | 10-piece wood router cutter set |
3 x | Ceramic-tipped tweezers and ESD 5-095 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Telephon pliers straight 200mm |
2 x | Independent four jaw chuck for the DB 250 |
1 x | Super-fine sanding discs grain 2000 |
1 x | Tungstein carbide rasp - and cutting disc |
2 x | Lambswool polishing disc |
2 x | Tool holder type D for SWH 1-A |
1 x | Tungsten carbide cutters set |
2 x | Boring Bar for CCMT 16mm |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
3 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
2 x | Super-fine sanding discs grain 000 |
1 x | Aluminium Die-Cast |
2 x | |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
4 x | ESD Tweezers 5-191 |
2 x | Five piece HSS chisel set |
1 x | Sanding fleece for LWS |
2 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Follow rest for D250X550 |
2 x | Parting tool 10mm |
1 x | EUROline snipe nose pliers |
1 x | SMD Tweezers 5-054 |
1 x | Telephone pliers bent 205mm |
1 x | Rebating cutter 6.4mm |
1 x | TIP SPT-2 |
1 x | Precision steel vice PM 40 |
1 x | EUROline round nose pliers |
1 x | Titan Tweezers 5-035 |
1 x | EPROM/Flash-PLCC32-2-DIL32 socket submodule |
1 x | Super-fine sanding discs grain 400 |
1 x | Machine Vice MS 4 |
1 x | lathe tools 8mm |
2 x | Slot cutter 6.5mm |
3 x | Felt polishers |
1 x | Flat nose pliers 160mm |
2 x | SMD Tweezers 5-061 |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | TIP SPT-10 |
4 x | 6-piece screwdriver set ESD |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Lathe tools 10mm pastilhados |
2 x | EUROline flat nose pliers |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | HSS cutting blade for OZI |
1 x | Tool holder type H for SWH 1-A |
2 x | quantum revolving center CM2 |
1 x | centrically clamping 125mm |
1 x | Titan Tweezers 5-037 |
1 x | Telephone pliers stright 205mm |
2 x | 6-piece screwdriver and cross-recess set ESD |
2 x | Collet chuck ER25 for D250X550 |
1 x | Supercut jig saw blades of special steel |
1 x | Spare cutting wire |
1 x | High quality corundum grinding bits |
1 x | Handy 1515 |
1 x | Telephone pliers bent 165mm |
1 x | 6-piece socket wrenches ESD |
1 x | Corundum sanding discs for LWS |
1 x | Telephon pliers straight 160mm |
1 x | Flexible polishing pad set |
1 x | Lathe chuck flange for D250X550 |
1 x | Diamond-coated cutting and roughing disc |
2 x | Slot cutter 5.0mm |
1 x | MICROMOT drill stand MB 200 |
1 x | Fluted filter for CW-matic |
1 x | WCMT050308 |
1 x | Step clamps made of steel |
1 x | Telephone pliers straight 205mm |
1 x | BeeHive204 |
1 x | Solid carbide saw blade |
2 x | Three jaw chuck for the lathe DB 250 |
1 x | SCLCR1010E06 |
1 x | Telephone pliers stright 165mm |
1 x | Grinding mop cylinder grit 80 |
2 x | sclcr2525M12 |
1 x | DEGRESER 200ml |
2 x | Coarse-toothed (25 TPI per 25mm) |
2 x | 4-jaw chuck individually clamping 125mm |
1 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
1 x | Component tweezers 5-007 |
1 x | MICROMOT steel collet set |
2 x | Rounding over cutter 6.4mm |
1 x | Gear Chuck |
1 x | Titan Tweezers 5-031 |
2 x | Inpection mirror 1-978 |
1 x | SMD Tweezers 5-057 |
1 x | Replacement belts for BSL 220/E |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
2 x | Blade holders for DS 460 |
1 x | Telephon pliers bent 200mm |
1 x | Grinding mop cylinder grit 120 |
1 x | Corundum bound cutting disc for LWS |
1 x | Component tweezers 5-009 |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
2 x | Inspector mirror |
2 x | HSS immersion saw blades for OZI |
1 x | Telephon pliers bent 160mm |
1 x | Combi cutter 6.5/2.5mm |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Fibre-Cut Discs |
1 x | High quality corundum grinding bits |
2 x | Safety Insulated Phillips Screwdriver 14-632VDE |
1 x | Screwdriver 5.5 |
1 x | Cross-recess Screwdrivers 1 |
1 x | Motor-driven carving device MSG |
1 x | Screwdriver 2.5 |
1 x | 6pcs Double Open End wrench set |
1 x | 2-speed scroll saw DSH |
1 x | Tungsten carbide drills Ø2mm |
1 x | Safety Insulated Phillips Screwdriver 14-634VDE |
1 x | MICRO woodturning lathe DB 250 |
1 x | Tungsten carbide drills Ø1mm |
1 x | Antiallergical Tweezers 5-155-1 |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | TORX-screwdrivers T9 |
1 x | TORX-screwdrivers T9 |
1 x | Wrench Keys 0.9 |
2 x | SMD Tweezers 5-052 |
1 x | Contact bracelet with spiral cord |
1 x | Surface planer AH 80 |
1 x | Hand Magnifier 2-293 |
1 x | High quality corundum grinding bits |
1 x | Cross-recess Screwdrivers 0 |
1 x | Fibre-Cut Discs |
2 x | Earthing module |
1 x | Multipurpose Vices Primus100 |
1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | Glass fibre contact cleaner brush |
2 x | 6-piece wrench key set ESD |
1 x | Sanding Drums |
1 x | Sanding Discs |
1 x | Diamond Cutting Discs |
1 x | End milling cutter kit HSS 20 pcs |
1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | Cross-recess Screwdrivers 000 |
1 x | End milling cutter kit HSS 12 pcs |
1 x | Screwdriver 5.5 |
2 x | Sanding bands 14x13mm |
1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
1 x | ESD Brushe |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Flap Wheels |
1 x | Wrench Keys 2.0 |
1 x | lathe tools 12mm |
1 x | Crocodile clip |
1 x | Screwdriver 1.2 |
1 x | Screwdriver 3.0 |
1 x | Cutting tool 10 mm |
1 x | Nylon Fleece Brushes |
1 x | HSS drill bits 0.8mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Safety insulated screwdrivers 14-603 VDE |
|
€23,521.53 |