1 x | Half round cutter 13mm |
1 x | V-slot cutter 6.5mm |
1 x | Insulation Resistance Tester MG500 |
1 x | Rebating cutter 6.4mm |
1 x | Diamond Grinding Bits 5mm |
1 x | PLCC Puller |
3 x | sclcr2525M12 |
3 x | Precision lathe PD 250/E |
2 x | Router base OFV |
2 x | Collet Set for accurate use on round components |
1 x | Ceramic-tipped tweezers and ESD 5-095 |
3 x | Grinding mop cylinder grit 120 |
1 x | Flame shaped milling cutters |
2 x | Replacement belts for BSL 220/E |
2 x | Lathe System PD 400 |
2 x | sanding belts for BBS/s Grit 240 |
1 x | Conj 5 pinças ESD |
2 x | Blade guides separately |
1 x | Precision drill grinder FBS 12/EF |
2 x | Precision Vice FMZ |
1 x | ESD-handling set |
2 x | Lathe tools 8mm pastilhados |
1 x | 6-piece set of ESD/EGB tweezers |
1 x | Tungsten carbide cutter 1.0mm |
5 x | Boring Bar for CCMT 8mm |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | ESD Tweezers 5-191 |
3 x | Cutting tools of high quality cobalt HSS steel, ground |
4 x | SCLCR1010E06 |
3 x | Felt cloth polishing disc (100 x 15mm) |
2 x | |
3 x | TU 1503V |
1 x | Cone shaped milling cutter |
1 x | Solid carbide stylus for engraving |
2 x | Four Jaw Chuck |
2 x | TU 2404 |
3 x | TU 2004V |
1 x | Bench drill machine TBM 220 |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
4 x | Cutting tool 10 mm |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
2 x | Diamond blade for MBS 240/E |
1 x | End milling cutter kit HSS 12 pcs |
2 x | sanding belts for BBS/s Grit 80 |
2 x | Grinding mop cylinder grit 120 |
1 x | Universal and oil siphoning pump AP 12 |
2 x | Milling cutter set (2 - 5mm) |
2 x | Cylinder shaped milling cutters |
2 x | Precision Vice FMS 75 |
1 x | Screwdriver bit set. 49-piece. |
1 x | MICROMOT 50 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
1 x | Wolfram vanadium steel milling bits |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
2 x | Blade for Steel and brass |
2 x | Multipurpose Vices Primus 75 |
1 x | MICRO Miller FF 230 |
1 x | Set of special steel cutters |
1 x | ESD Tweezers 5-195 |
3 x | Grinding mop cylinder grit 80 |
4 x | Lathe tools 10mm pastilhados |
1 x | ESD Tweezers 5-193 |
3 x | Boring Bar for CCMT |
2 x | MICROMOT Mains Adapter NG 2/S |
2 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
2 x | Blade for Wood and Plastics |
3 x | Tungsten carbide cutters set |
2 x | Universal polishing paste |
2 x | ESD-handling ser 9-361 |
1 x | Band knife of hardened spring band steel (without teeth) |
2 x | Replacement belts for BSL 220/E |
1 x | Ceramic-tipped tweezers and ESD 5-096 |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | ESD Tweezers 5-192 |
3 x | Centre Turning Attachment |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | MICROMOT 50/EF |
1 x | Bench drill press TBH |
1 x | sanding belts for BBS/s Grit 150 |
2 x | EUROline-Conductive set of pliers |
4 x | lathe tools 8mm |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
2 x | Grinding mop cylinder grit 240 |
1 x | Replacement belts for BSL 220/E |
1 x | Disc cutters |
2 x | Cutting tool 8 mm |
1 x | Tool holder for rotary tools |
1 x | MICROMOT 50/E |
1 x | Gear Chuck |
1 x | Super safety and specialty bit set, 75-piece |
1 x | TIP SPT-2 |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Solid carbide stylus for engraving |
2 x | Compact workshop vacuum cleaner CW-matic |
2 x | HSS boring tool set, 6 pieces |
2 x | Cutting tool HM 20 mm |
2 x | Fixed Steady |
1 x | MICROMOT 230/E |
1 x | Replacement belts for BSL 220/E |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Set of precision cutters |
3 x | Precision steel vice PM 40 |
1 x | Ball shaped milling cutters |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
2 x | Multipurpose Vices Primus100 |
1 x | Tungsten carbide cutter 2.0mm |
1 x | Three jaw chuck for the lathe DB 250 |
2 x | Independent four jaw chuck for the DB 250 |
3 x | Micro Compound Table KT 70 |
1 x | End side cutters 45º EUROline-Conductive |
2 x | quantum revolving center CM2 |
2 x | Three-jaw steel drill chuck |
1 x | Fibre-Cut Discs |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | MICRO shaper MP 400 |
1 x | Safety Insulated Phillips Screwdriver 14-632VDE |
2 x | Replacement glue sticks for HKP 220 |
1 x | Wrench Keys 2.5 |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Corundum grinding disc for LWS |
1 x | Flexishaft MICROMOT 110/P |
1 x | sandpaper for PS 13 Grit 240 |
1 x | Fibre-Cut Discs |
2 x | MICROMOT steel collet set |
3 x | Precision quick-action drill chuck 0-16mm B16 |
1 x | Flexible polishing pad set |
1 x | ACCENT SERVICE TOOLS SET |
1 x | Corundum sanding discs for LWS |
3 x | Chuck for TBM 220 |
4 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Wrench Keys 1.5 |
2 x | Replacement carving blades for MSG |
1 x | Conjunto de três brocas de ponto |
2 x | Flexishaft MICROMOT 110/BF |
1 x | High quality corundum grinding bits |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Corundum bound cutting disc for LWS |
1 x | Earth wire with dummy Schunko-plug |
1 x | Wrench Keys 0.9 |
3 x | Cutting disc, with reinforcement |
1 x | sandpaper for PS 13 Grot 180 |
1 x | Crosscut 'Super-Cut' blade |
1 x | Polishing Set |
1 x | Silicon-Carbide. |
2 x | Five piece HSS chisel set |
1 x | 14-piece parallel supports set |
1 x | Boring Bar for DCMT 10mm |
1 x | Lathe chuck flange for D250X550 |
3 x | Machine Vice MS 4 |
1 x | Quick-action tool holder kit SWH AA |
1 x | Floor cover ESD |
1 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Saw blade made of high-alloy special steel |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | End side cutters EUROline-Conductive |
1 x | Diamond blade |
1 x | Multiform grindstone |
1 x | sandpaper for PS 13 Grit 400 |
1 x | Precision quick-action drill chuck 0-8mm B16 |
3 x | Step clamps made of steel |
1 x | Crocodile clip |
1 x | MICROMOT drill stand MB 200 |
1 x | Cutting tool 16 mm |
1 x | Cups brushes |
2 x | MICROMOT Mains Adapter NG 2/E |
1 x | Collet chuck ER25 for D250X550 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | lathe tools 12mm |
1 x | Tool holder type H for SWH 1-A |
1 x | Flap Wheels |
1 x | Protective device for hand-operated MICROMOT |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Follow rest for D250X550 |
1 x | lathe tools 10mm |
1 x | Round nose pliers 45º EUROline-Conductive |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
3 x | Boring Bar for CCMT 16mm |
2 x | Dividing attachment TA 230 for PF 250 |
1 x | Special Fused Alumina (Hardness N). |
1 x | Cotton polishers |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Corundum fan sander for LWS |
1 x | Corundum sanding discs for LWS |
1 x | Cotton polishers |
1 x | Earth wire |
1 x | Contact bracelet with spiral cord |
1 x | Diamond-coated cutting disc for MIC |
1 x | Spare cutting wire |
1 x | Wrench Keys 2.0 |
1 x | High quality corundum grinding bits |
1 x | Engraving tool GG |
1 x | Core box bit 3.2mm |
1 x | HSS twist drill set with centring pin |
1 x | Footswitch FS |
1 x | Cut off/mitre saw KGS 80 |
1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Milling cutter set (6 - 10mm) |
1 x | Aluminium Die-Cast |
1 x | Corundum grinding disc for LWS |
1 x | Diamond-coated cutting and roughing disc |
1 x | Earth wire |
1 x | Mini side cutters EUROline-Conductive |
1 x | Fibre-Cut Discs |
1 x | MICROMOT tool holder |
1 x | Flexible polishing pad set |
1 x | Safety Insulated Phillips Screwdriver 14-631VDE |
1 x | Tungsten tipped saw blade |
1 x | BeeHive204 |
1 x | Collet chuck ER32 for D250X550 |
|
€34,807.14 |