Top » Catalog » Drilling-milling machine » End mill » 3350213

€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 1.0mm
1 x	Conjunto de três brocas de ponto
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 1.4mm
1 x
1 x	Broca de alta duração de 0.8mm
1 x	Floor cover ESD
1 x	Cylinder sander WAS/E
2 x	Cutter head for copy and surface milling MT3
2 x	MICRO Miller FF 500
1 x	Broca de ponto 6.30 x 2.50
1 x	Broca de ponto 3.15 x 1.25
1 x	Broca de alta duração de 0.4mm
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	broca de alta duração de 0,6mm
1 x	OPTI BF16 Vario
1 x	Broca de alta duração de 0.3mm
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 1.1mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Broca de alta duração de 0.5mm
4 x	MICRO Miller MF 70
1 x	sandpaper for PS 13 Grit 400
1 x	Replacement belts for BSL 220/E
1 x	Gear Chuck
1 x	Super-Cut
1 x	Fixed Steady
1 x	Fine dust paper filter for CW-matic
1 x	Blade for Wood and Plastics
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Sanding pads for OZI 220/E grit 240
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Cutting disc, with reinforcement
1 x	Cutter head for copy and surface milling MT2
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Five piece HSS chisel set
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Diamond blade for MBS 240/E
1 x	sandpaper for PS 13 Grit 240
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Broca de alta duração de 2.4mm
1 x	sanding belts for BBS/s Grit 240
1 x	Replacement belts for BSL 220/E
1 x	Diamond Coated
1 x	HSS immersion saw blades for OZI
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICRO Miller FF 230
1 x	Rebating cutter 6.4mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Tool holder for rotary tools
1 x	10-piece wood router cutter set
1 x	HSS cutting blade for OZI
1 x	Slot cutter 3.2mm
1 x	Edge cutter with pin 6.4mm
1 x	Half round cutter 13mm
1 x	Tungstein carbide rasp - and cutting disc
2 x	Broca de ponto 5.00 x 2.00
1 x	Corundum grinding disc for LWS
1 x	Sanding fleece for LWS
1 x	Lambswool polishing disc
1 x	Polishing felt, medium hard
1 x	Special Fused Alumina (Hardness N).
1 x	Machine Vice MS 4
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 120
1 x	Footswitch FS
1 x	Corundum sanding discs for LWS
1 x	Corundum fan sander for LWS
1 x	Replacement carving blades for MSG
1 x	Super-fine sanding discs grain 400
1 x	Diamond blade
1 x	Step clamps made of steel
1 x	Diamond-coated cutting and roughing disc
1 x	Silicon-Carbide.
1 x	Corundum grinding disc for LWS

€8,700.25