Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	EUROline side cutter pointed head
1 x	Compact workshop vacuum cleaner CW-matic
1 x	EUROline round nose pliers
1 x	Three piece thread cutting set
2 x	10-piece wood router cutter set
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Edge cutter with pin 6.4mm
2 x	Thicknesser DH 40
1 x	Screwdriver bit set. 49-piece.
1 x	HSS boring tool set, 6 pieces
2 x	Machine Vice MS 4
1 x	Slot cutter 3.2mm
2 x	surface planing and thicknessing ADH 200
2 x	Polishing machine PM 100
2 x	MICRO shaper MP 400
2 x	Multipurpose Vices Primus100
1 x	Precision lathe PD 250/E
2 x	Belt sander BS/E
2 x	Table Saw FET
1 x	MICRO Miller MF 70
2 x	Cut off/mitre saw KGS 80
1 x	Long neck angle grinder LHW
2 x	Precision steel vice PM 40
1 x	MICRO Band Saw MBS 240/E
1 x	MICRO Miller FF 230
1 x	Jig saw STS 12/E
2 x	Multipurpose Vices Primus 75
1 x	V-slot cutter 6.5mm
1 x	MICRO Miller FF 500
1 x	Hot wire cutter THERMOCUT 650
2 x	MICRO cutter MIC
3 x	Belt sander BBS/S
3 x	2-speed scroll saw DSH
3 x	Bench Circular Saw KS 230
1 x	Disc Sander TG 125/E
1 x	FREEZER-BR 200ml
1 x	Scroll saw DS 230/E
2 x	Angle polisher WP/E
2 x	Precision Vice FMZ
1 x	Wood Lathe DB900
1 x	Surface planer AH 80
2 x	Bench drill press TBH
1 x	Precision Vice FMS 75
1 x	Grinding and Polishing Machine SP/E
2 x	surface planing and thicknessing ADH 250
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Universal and oil siphoning pump AP 12
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	MICROMOT 230/E
1 x	Table Saw TKS 2500 SC
2 x	Motor-driven carving device MSG
1 x	MICROMOT 50
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Mill/Drill System BFW 40/E
2 x	MICRO woodturning lathe DB 250
2 x	Lathe System PD 400
1 x	Disc Sander TG 250/E
1 x	EUROline end cutter
2 x	Table Sawr TKS 315 E
2 x	Core box bit 3.2mm
1 x	Delta sander OZI/E
2 x	Rebating cutter 6.4mm
1 x	Precision drill grinder FBS 12/EF
1 x	MICROMOT 50/EF
1 x	MICROMOT 50/E
2 x	Bench drill machine TBM 220
1 x	Cylinder sander WAS/E
1 x	Super jig saw STS/E
1 x	BIT-SET
1 x	MICROFLAM gas soldering set MGS
1 x	Half round cutter 13mm
2 x	Slot cutter 6.5mm
1 x	Corundum sanding discs for LWS
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Diamond-coated cutting and roughing disc
1 x	Dividing attachment TA 230 for PF 250
1 x	Ball shaped milling cutters
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Grinding mop cylinder grit 80
3 x	Tungstein carbide rasp - and cutting disc
2 x	Corundum bound cutting disc for LWS
2 x	Sanding fleece for LWS
1 x	Band knife of hardened spring band steel (without teeth)
2 x	14-piece parallel supports set
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT tool holder
1 x	Slot cutter 5.0mm
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x
1 x	Grinding mop cylinder grit 120
1 x	Professional set for finish grinding and polishing
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Backing disc for LWS
4 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Wood Lathe DB450
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
3 x	Corundum fan sander for LWS
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Super-fine sanding discs grain 400
1 x	Combi cutter 6.5/2.5mm
1 x	Tungsten carbide cutters set
3 x	Corundum grinding disc for LWS
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Centre Turning Attachment
1 x	Sanding fleece for LWS
1 x	Cutter head for copy and surface milling MT3
1 x	Cutter head for copy and surface milling MT2
1 x	Aluminium Die-Cast
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Angle cutter 45 °
1 x	Jig saw blades made of HSS
1 x	Replacement glue sticks for HKP 220
2 x	Grinding mop cylinder grit 120
1 x	Lambswool polishing disc
1 x	Four Jaw Chuck
1 x	sanding belts for BBS/s Grit 150
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Corundum sanding discs for LWS
1 x	Blade for Steel and brass
1 x	sandpaper for PS 13 Grit 400
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Universal polishing paste
1 x	MICROMOT extension cord. 300cm.
1 x	Step clamps made of steel
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Blade guides separately
1 x	MICROMOT drill stand MB 200
1 x	Super-fine sanding discs grain 000
1 x	TIP SPT-4
1 x	Blade holders for DS 460
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Multiform grindstone
1 x	Replacement carving blades for MSG

€25,593.22