Top » Catalog » Drilling-milling machine » End mill » 3350213

€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Wolfram vanadium steel milling bits
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Super safety and specialty bit set, 75-piece
2 x	High quality corundum grinding bits
4 x	Dial gauge
1 x	Complete Engraving Kit with trial glass
2 x	Combi cutter 6.5/2.5mm
1 x	Protective device for hand-operated MICROMOT
1 x	Fixed Steady
1 x	Thicknesser DH 40
3 x	Flexible silicon discs
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Digital caliper gauge 300 mm
1 x	Nylon Fleece Brushes
1 x	Belt sander BS/E
2 x	Crosscut 'Super-Cut' blade
3 x	Steel tape measure
2 x	Diamond Grinding Bits 5mm
1 x	Multipurpose Vices Primus 75
1 x	HSS twist drill set to DIN 338
1 x	Cotton polishers
2 x	Replacement belts for BSL 220/E
1 x	Four Jaw Chuck
1 x	Cone shaped milling cutter
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Broca de alta duração de 2.4mm
2 x	Cylinder sander WAS/E
1 x	MICRO Band Saw MBS 240/E
3 x	Flexible silicon discs
2 x	Precision magnetic gauge stand
1 x	Ball-shaped diamond coated 1.2mm
1 x	Collet Set for accurate use on round components
1 x	Blade holders for DS 460
1 x	magnetic base 80kg
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Screwdriver bit set. 49-piece.
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Hot wire cutter THERMOCUT 650
2 x	Precision caliper 500mm
1 x	Precision lathe PD 250/E
1 x	Cotton polishers
1 x	Sanding Discs
1 x	Fibre-Cut Discs
1 x	10-piece wood router cutter set
3 x	Chuck for TBM 220
1 x	Hot wire cutter THERMOCUT 12/E
1 x	MICROMOT drill stand MB 200
1 x	Corundum sanding discs for LWS
1 x	Backing disc for LWS
1 x	Flexible polishing pad set
3 x	Centre Turning Attachment
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond blade
1 x	Sanding Drums
3 x	Compact workshop vacuum cleaner CW-matic
2 x	Step clamps made of steel
1 x	Multipurpose Vices Primus100
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Gear Chuck
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Precision steel vice PM 40
3 x	Polishing Set
1 x	Diamond Cutting Discs
1 x	Tool holder for rotary tools
4 x	Bench drill press TBH
1 x	Diamond Grinding Bits 1,8mm
1 x	Long neck angle grinder LHW
1 x	Lever Dial Indicator
3 x	Flexible polishing pad set
1 x	Ball-shaped diamond coated 3.2mm
1 x	Disc Sander TG 250/E
1 x	14-piece parallel supports set
1 x	Corundum sanding discs for LWS
1 x	Sanding bands 14x13mm
1 x	Wolfram vanadium steel milling bits
1 x	Ball-shaped diamond coated 2.2mm
2 x	Supercut jig saw blades of special steel
1 x	Conjunto de três brocas de ponto
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
2 x	Precision caliper square
1 x	Delta sander OZI/E
1 x	Corundum fan sander for LWS
1 x	Angle polisher WP/E
1 x	Blade for Wood and Plastics
1 x	Professional set for finish grinding and polishing
1 x	Magnetic base
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
4 x	MICRO Miller FF 230
1 x	Diamond Grinding Bits 1,8mm
1 x	Universal holder UHZ
1 x	VIDEOCLEAN 200ml
2 x	Special Fused Alumina (Hardness N).
2 x	Safety Insulated Phillips Screwdriver 14-632VDE
2 x	Professional Drill/Grinder IBS/E
1 x	sandpaper for PS 13 Grit 240
3 x	MICRO Miller MF 70
1 x	Milling cutter set (6 - 10mm)
1 x	Angle cutter 45 °
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Fibre-Cut Discs
2 x	Flexible silicon discs
2 x	Micro Compound Table KT 70
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Tungsten Carbide Tipped (TCT)
1 x	Quick-action tool holder kit SWH AA
1 x	TUNER 200ml
1 x	Grinding and Polishing Machine SP/E
1 x	High quality corundum grinding bits
1 x	IC tweezers
2 x	MICRO Miller FF 500
2 x	VASELINE 200ml
3 x	MICROMOT 50/E
1 x	Universal and oil siphoning pump AP 12
1 x	Metal Cutting Blades
1 x	PROTECTION 200ml
1 x	Five piece HSS chisel set
3 x	Half round cutter 13mm
1 x	centrically clamping 100mm
3 x	MICROMOT 230/E
1 x	MICROMOT steel collet set
2 x	Bench drill machine TBM 220
2 x	Cutter head for copy and surface milling MT3
1 x	MICROMOT 50
2 x	Flexishaft MICROMOT 110/P
2 x	Safety Insulated Phillips Screwdriver 14-633VDE
2 x	SILICONE 200ml
2 x	Machine Vice MS 4
3 x	sandpaper for PS 13 Grit 400
1 x	Mill/Drill System BFW 40/E
1 x	Tool holder type H for SWH 1-A
2 x	Long neck straight drill/grinder LB/E
1 x	3-jaw chuck centrically clamping 80mm
3 x	FREEZER-BR 200ml
1 x	Replacement belts for BSL 220/E
1 x	Corundum fan sander for LWS
1 x	3-jaw chuck centrically clamping 160mm
1 x	Fluted filter for CW-matic
1 x	End milling cutter kit HSS 12 pcs
1 x	MICRO shaper MP 400
1 x	Router base OFV
1 x	centrically clamping 125mm
2 x	Cutter head for copy and surface milling MT2
1 x	sandpaper for PS 13 Grot 180
1 x	Tungsten tipped saw blade
1 x	Jig saw blades made of HSS
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Microfibre cloth
1 x	Slot cutter 6.5mm
1 x	CM2 - B16 - M10
2 x	Rebating cutter 6.4mm
1 x	ANTISTATIC 200ml
1 x	SCREEN 200ml
1 x	V-slot cutter 6.5mm
1 x	POLISHER 200ml
1 x	Lathe chuck flange for D250X550
1 x	TU 1503V
1 x	4-jaw chuck individually clamping 100mm
1 x	Grinding mop cylinder grit 120
1 x	Engraving tool GG
2 x	4-jaw chuck individually clamping 125mm
1 x	Spare cutting wire
1 x	TU 2004V
2 x	Footswitch FS
1 x	3-jaw chuck centrically clamping 100mm
1 x	MICROMOT Mains Adapter NG 5/E
2 x	Lathe System PD 400
1 x	Grinding mop cylinder grit 120
1 x	Precision Vice FMS 75
3 x	Precision Drill/Grinder FBS 240/E
2 x	PROLUB 200ml
1 x	Cutting disc, with reinforcement
1 x	DEGRESER 200ml
1 x	HSS drill bits 1.0mm
1 x	Replacement belts for BSL 220/E
2 x	OPTI BF20 VARIO
2 x	Precision drill grinder FBS 12/EF
1 x	OPTI BF16 Vario
2 x	Grinding mop cylinder grit 240
1 x	Super-fine sanding discs grain 400
1 x	Steady rest for D250X550
1 x	Cutting tool 16 mm
1 x	HSS twist drill set with centring pin
1 x	sanding belts for BBS/s Grit 80
1 x	Face clamping disc for D250X550
2 x	OPTI BF20L VARIO
2 x	TOP-PIN 200ml
2 x	Flexishaft MICROMOT 110/BF
1 x	Three-jaw steel drill chuck
1 x	Grinding mop cylinder grit 80
1 x	Saw blade made of high-alloy special steel
1 x	Tungstein carbide rasp - and cutting disc
1 x	Fibre-Cut Discs
1 x	MICROMOT 50/EF
1 x	Replacement glue sticks for HKP 220
1 x	Fibre-Cut Discs
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	sanding belts for BBS/s Grit 150
2 x	SPRAYFLON 200ml
1 x	DCMT070204
1 x	Universal polishing paste
1 x	Sanding fleece for LWS
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Fibre-Cut Discs
2 x	FREEZER-TOP 200ml
1 x	sanding belts for BBS/s Grit 240
1 x	Tungsten carbide cutters set
1 x	Rounding over cutter 6.4mm
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	HSS drill bits 1.2mm
1 x	Sanding pads for OZI 220/E grit 80
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Three jaw chuck for the lathe DB 250
1 x	Follow rest for D250X550
1 x	Super-Cut
1 x	Diamond cutting blade for OZI
1 x	PLCC Extractor
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Tool holder type D for SWH 1-A
1 x	HSS drill bits 1.6mm
1 x	Flap Wheels
1 x	Steel cups
2 x
1 x	Cutting tool 10 mm
1 x	4-jaw chuck individually clamping 80mm
1 x	FLUX-OFF 400ml
1 x	MULTI 200ml
2 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Flap Wheels
1 x	Cutting tool HM 20 mm
1 x	Silicon-Carbide.
1 x	Diamond Cutting Discs
1 x	Replacement belts for BSL 220/E
1 x	Edge cutter with pin 6.4mm
1 x	HSS boring tool set, 6 pieces
1 x	Disc cutters
1 x	PRINTER 200ml

€36,807.26