€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Diamond blade for MBS 240/E
1 x	Tungsten Carbide Tipped (TCT)
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Steady rest for D250X550
1 x	Sanding Discs
1 x	Multiform grindstone
2 x	2-speed scroll saw DSH
1 x	Grinding mop cylinder grit 120
1 x	Precision steel vice PM 40
1 x	Five piece HSS chisel set
1 x	Universal holder UHZ
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 0.5mm
2 x	HSS drill bits 0.8mm
1 x	Centre Turning Attachment
1 x	Engraving tool GG
1 x	MICROFLAM gas soldering set MGS
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement belts for BSL 220/E
1 x	sandpaper for PS 13 Grit 400
1 x	Corundum sanding discs for LWS
1 x	MICROMOT 50
1 x	BGA-Bottom-127
2 x	HSS twist drill set with centring pin
1 x	HSS drill bits 1.0mm
1 x	Backing disc for LWS
2 x	Conjunto de três brocas de ponto
1 x	Tungsten carbide drills Ø1mm
1 x	Long neck straight drill/grinder LB/E
1 x	BGA-Bottom-106
1 x	Belt sander BS/E
1 x	14-piece parallel supports set
1 x	MICRO Miller FF 230
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Steel tape measure
1 x	Dividing attachment TA 230 for PF 250
2 x	Bench drill machine TBM 220
1 x	DIL48/MQFP80 ZIF C500
1 x	BGA-0245/0241
1 x	BGA-Bottom-111
1 x	Tungsten carbide drills Ø2mm
1 x	Precision lathe PD 250/E
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	BGA-Bottom-10
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Ball-shaped diamond coated 1.2mm
1 x	Band knife of hardened spring band steel (without teeth)
1 x	BGA-Bottom-126

€5,258.85