Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	BGA-Bottom-208
1 x	BGA-Bottom-223
1 x	BGA-Bottom-218
1 x	BGA-Bottom-224
1 x	BGA-Bottom-215
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-8
1 x	BGA-Bottom-171
1 x	BGA-Bottom-164
1 x	BGA-Bottom-2
1 x	BGA-Bottom-18
1 x	Fluted filter for CW-matic
1 x	BGA-Bottom-216
1 x	BGA-Bottom-204
1 x	Telephone pliers straight 205mm
1 x	BGA-Bottom-194
2 x	Step clamps made of steel
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-177
1 x	BGA-Bottom-88
1 x	Machine Vice MS 4
1 x	Precision steel vice PM 40
1 x	BGA-Bottom-214
1 x	BGA-Bottom-157
1 x	BGA-Bottom-169
1 x	sanding belts for BBS/s Grit 240
2 x	Replacement glue sticks for HKP 220
1 x	BGA-Bottom-187
1 x	BGA-Bottom-173
1 x	BGA-Bottom-170
1 x	Beeprog2C
1 x	Fine dust paper filter for CW-matic
1 x	BGA-Bottom-167
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Bottom-209
1 x	BGA-Bottom-198
2 x	SmartProg2
1 x	Precision Vice FMZ
1 x	BGA-Bottom-225
1 x	BGA-Bottom-16
2 x	Diamond-coated cutting and roughing disc
1 x	BGA-Bottom-222
1 x	BGA-Bottom-207
1 x	End mill for aluminium 4mm
4 x	Backing disc for LWS
3 x	Three jaw chuck for the lathe DB 250
1 x	Bench drill press TBH
1 x	Bench Circular Saw KS 230
2 x	Combination pliers 160mm
1 x	Super-fine sanding discs grain 2000
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Flat nose pliers 160mm
1 x	Telephon pliers straight 200mm
1 x	High quality corundum grinding bits
2 x	MICROMOT extension cord. 300cm.
1 x	Fibre-Cut Discs
3 x	Independent four jaw chuck for the DB 250
1 x	High quality corundum grinding bits
1 x	Boring Bar for CCMT 16mm
1 x	Felt polishers
1 x	Replacement carving blades for MSG
1 x	Super-fine sanding discs grain 000
2 x	10-piece wood router cutter set
1 x	High quality corundum grinding bits
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Professional polishing sponge
1 x	BIT-SET
2 x	Micro Compound Table KT 70
2 x	Insert CCGT060202-AK
2 x	2-speed scroll saw DSH
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	MICROMOT drill stand MB 200
1 x	Boring Bar for DCMT 10mm
1 x	Belt sander BBS/S
1 x	Milling cutter set (6 - 10mm)
1 x	High quality corundum grinding bits
1 x	Milling cutter set (2 - 5mm)
1 x	Ball-shaped diamond coated 1.2mm
1 x	Wolfram vanadium steel milling bits
1 x	Grinding mop cylinder grit 120
1 x	Angle polisher WP/E
1 x	Flexishaft MICROMOT 110/P
1 x	Side cutters 160mm
1 x	Boring Bar for CCMT
1 x	Angle cutter 45 °
1 x	Fibre-Cut Discs
1 x	Microfibre cloth
1 x	Drill chuck with sliding sleeve for the tailstock
3 x	Five piece HSS chisel set
1 x	Combination pliers 185mm
1 x	SCLCR1010E06
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Grinding mop cylinder grit 240
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Wolfram vanadium steel milling bits
1 x	High quality corundum grinding bits
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Aluminium Die-Cast
1 x	Polishing felt, medium hard
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Fibre-Cut Discs
1 x	Bench drill machine TBM 220
1 x	Protective device for hand-operated MICROMOT
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Fibre-Cut Discs
3 x	Blade for Steel and brass
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	End mill for aluminium 3mm
1 x
1 x	Ball shaped milling cutters
1 x	Flexible polishing pad set
1 x	Sanding Drums
2 x	BeeHive204
1 x	Ball-shaped diamond coated 3.2mm
2 x	Dividing attachment TA 230 for PF 250
2 x	Band knife of hardened spring band steel (without teeth)
3 x	14-piece parallel supports set
1 x	Side cutters 180mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	Flexishaft MICROMOT 110/BF
1 x	sandpaper for PS 13 Grit 240
1 x	Round nose pliers 165mm
1 x	Router base OFV
2 x	Diamond Coated
1 x	Pensander PS 13
1 x	Centre Turning Attachment
1 x	Four Jaw Chuck
1 x	MICROMOT steel collet set
2 x	Three-jaw steel drill chuck
1 x	Universal and oil siphoning pump AP 12
1 x	Fixed Steady
1 x	DCGT 070202F-AL
1 x	Engraving tool GG
1 x	Combination pliers 205mm
1 x	ESD-handling set
1 x	PLCC Puller
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cross-recess Screwdrivers 0
1 x	MICRO Miller FF 500
1 x	Solid carbide saw blade
2 x	Chuck for TBM 220
1 x	MICROMOT tool holder
1 x	Combination pliers 185mm
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Long neck angle grinder LHW
3 x	Tungsten Carbide Tipped (TCT)
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Collet Set for accurate use on round components
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
1 x	Combination pliers 210mm
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Turning inserts WCMX050308F
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Insert LGTN-3
1 x	Corundum grinding disc for LWS
1 x	DIL40/TQFP64 ZIF CC-1
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Diamond-coated cutting disc for MIC
1 x	Corundum fan sander for LWS
1 x	WCMT050308
1 x	DIL48/TQFP144 ZIF ST10-1
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Replacement belts for BSL 220/E
1 x	TCMT090204
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	Sanding fleece for LWS
1 x	SCMT09T304
1 x	DIL44/TQFP44-1 Zif
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Turning inserts SCMT09T304
1 x	Super-Cut
1 x	Footswitch FS
1 x	DCMT070204
1 x	TCMT110204
1 x	DIL44/TQFP44-3 ZIF
1 x	Supercut jig saw blades of special steel
1 x	Replacement belts for BSL 220/E
1 x	Corundum sanding discs for LWS
1 x	Magnetic base
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	Turning inserts CCMT09T304
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	Tungstein carbide rasp - and cutting disc
1 x	Replacement belts for BSL 220/E
1 x	Threading inserts 60º
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	Corundum fan sander for LWS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Cutting disc, with reinforcement
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	HSS cutting blade for OZI
1 x	DIL48/QFN48 ZIF-CS
1 x	BGA-Bottom-125
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	BeeHive208S
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL48/QFP100 ZIF PLD-3
1 x	BGA-Bottom-106
1 x	BGA-Bottom-111
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	BGA-Bottom-126
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL48/QFP100 ZIF NEC-2
1 x	Sanding pads for OZI 220/E grit 240
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL28/QFN28-2 ZIF-CS

€31,464.97