€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	DIL48/QFP100 ZIF PLD-4
1 x	Wrench Keys 1.3
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	Floor cover ESD
1 x	Screwdriver 2.5
1 x	BGA-0245/0243
1 x	Screwdriver 1.5
1 x	Socket Wrenches 5.0
1 x	Glass fibre contact cleaner brush
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Screwdriver 2.0
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	BGA-Bottom-106
1 x	MULTI 200ml
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Screwdriver 2.0
1 x	Glass fibre contact cleaner brush
1 x	Ceramic tweezers 5-081
2 x	Screwdriver 1.8
1 x	Flat nose pliers 165mm
1 x	6-piece socket wrenches ESD
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	6-piece set of ESD/EGB tweezers
1 x	Bottom PSOP44 NOR-2
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	6-piece screwdriver set ESD
1 x	PROLUB 200ml
1 x	BGA-Bottom-102
1 x	Flat nose pliers 185mm
1 x	BGA-Bottom-125
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	EUROline side cutter pointed head
1 x	Screwdriver 2.5
1 x	BGA-Bottom-103
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	Screwdriver 1.2
1 x	Mini side cutters EUROline-Conductive
1 x	SPRAYOIL 200ml
1 x	Socket Wrenches 2.5
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	DIL28/QFP52 ZIF-CS SX52

€4,633.79