Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x V-slot cutter 6.5mm
1 x Combination pliers 210mm
2 x Angle polisher WP/E
2 x Grinding and Polishing Machine SP/E
1 x Sanding fleece for LWS
1 x Hand magnifier with LED light 3X
1 x EUROline flat nose pliers
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Super-fine sanding discs grain 400
2 x Chuck for TBM 220
1 x Diamond Cutting Discs
3 x 10-piece wood router cutter set
2 x Flap Wheels
1 x HSS drill bits 1.2mm
1 x Table Saw TKS 2500 SC
1 x 6-piece set of ESD/EGB tweezers
1 x Side cutters 170mm
1 x Magnetic base
1 x High quality corundum grinding bits
1 x Polishing felt, medium hard
1 x Snipe nose pliers 45º EUROline-Conductive
2 x Backing disc for LWS
2 x Disc Sander TG 250/E
1 x Gear Chuck
2 x Cotton polishers
1 x Felt polishers
2 x Dial gauge
1 x Safety insulated screwdrivers 14-606 VDE
2 x High quality corundum grinding bits
1 x Cylinder sander WAS/E
1 x Digital caliper gauge 300 mm
1 x Lambswool polishing disc
3 x Disc Sander TG 125/E
1 x Crimping plier for BNC
1 x Delta sander OZI/E
1 x Insulation Resistance Tester MG500
1 x Hot wire cutter THERMOCUT 230/E
1 x Four Jaw Chuck
1 x Diamond Twist Drills
1 x EUROline mini side cutter
1 x Diamond blade for MBS 240/E
1 x Diamond Grinding Bits 1,8mm
1 x Coarse-toothed (18 TPI per 25mm)
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Felt polishers
1 x Footswitch FS
1 x Edge cutter with pin 6.4mm
1 x SmartProg2
2 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Ceramic-tipped tweezers and ESD 5-095
1 x Compact workshop vacuum cleaner CW-matic
1 x Diamond blade
1 x Fibre-Cut Discs
1 x MICROFLAME burner MFB/E
2 x Sanding bands 14x13mm
1 x Wire strippers 165mm
1 x Table Sawr TKS 315 E
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Complete Engraving Kit with trial glass
1 x Tungsten carbide drills Ø1mm
3 x Half round cutter 13mm
1 x 6-piece socket wrenches ESD
1 x Metal Cutting Blades
1 x MICROMOT Mains Adapter NG 5/E
1 x Combination pliers 170mm
1 x Tungsten carbide drills Ø1,5mm
1 x Long neck angle grinder LHW
1 x Grinding mop cylinder grit 240
1 x Wire strippers 165mm
1 x Bench drill machine TBM 220
1 x Floor cover ESD
1 x Fibre-Cut Discs
1 x magnetic base 80kg
1 x Tungsten Carbide Tipped (TCT)
1 x TU 2404
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Ceramic-tipped tweezers and ESD 5-096
1 x MICROMOT 50/E
1 x Ball-shaped diamond coated 2.2mm
1 x HSS drill bits 1.6mm
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x End side cutters 45º EUROline-Conductive
2 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Flexible polishing pad set
1 x Steel tape measure
1 x Broca de ponto 5.00 x 2.00
1 x Steel cups
1 x Safety insulated screwdrivers 14-603 VDE
1 x Broca de ponto 3.15 x 1.25
1 x Professional polishing sponge
1 x High quality corundum grinding bits
1 x Inpection mirror 1-978
3 x Belt sander BBS/S
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Wire strippers 160mm
1 x Side cutters EUROline-Conductive
1 x Belt sander BS/E
1 x Diamond Cutting Discs
1 x HSS drill bits 0.8mm
1 x Corundum fan sander for LWS
1 x Cotton polishers
1 x Flexible silicon discs
2 x Sanding Drums
1 x 14-piece parallel supports set
1 x Stainless steel brushes
1 x Fibre-Cut Discs
1 x Bench drill press TBH
1 x TIP SPT-4
1 x Corundum sanding discs for LWS
1 x Combi cutter 6.5/2.5mm
1 x Lever Dial Indicator
2 x Precision caliper 500mm
1 x Fibre-Cut Discs
1 x Safety insulated screwdrivers 14-601 VDE
1 x Grinding mop cylinder grit 80
1 x Steel brushes
1 x High quality corundum grinding bits
1 x Steel wheels
1 x Sanding Discs
2 x Diamond Coated
1 x Warding files set, 6pcs
1 x Milling cutter set (6 - 10mm)
1 x Slot cutter 6.5mm
1 x Broca de ponto 3.15 x 1.00
1 x Mill/Drill System BFW 40/E
1 x High quality corundum grinding bits
1 x Professional set for finish grinding and polishing
1 x MICRO Miller FF 230
1 x Cutting disc, with reinforcement
1 x Precision drill grinder FBS 12/EF
1 x EUROline mini side cutter
1 x Long neck straight drill/grinder LB/E
1 x TIP SPT-10
1 x EUROline mini side cutter
1 x Conj 5 pinças ESD
1 x Flexible polishing pad set
1 x Tungsten carbide drills Ø2mm
1 x Angle cutter 45 °
1 x Sanding Drums
1 x Diamond cutting blade for OZI
1 x Universal holder UHZ
1 x MICROMOT 50
1 x Side cutters 160mm
1 x Precision Drill/Grinder FBS 240/E
1 x Pensander PS 13
1 x MICRO Heat gun MH 550
1 x Telephone pliers bent 205mm
€13,220.64
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Cylinder sander WAS/E
Cylinder sander WAS/E
€119.92
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online