Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
eight independent universal programming modules (BeeProg2 based) in one unit
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
powerful independent pin-driver circuit for each and every pin of the programmer
in-circuit programming capability through ISP connector
graphics control unit with touch screen
very low voltage support for the latest Flash memory chips
ESD protection on each pin of the sockets
no adapter required for any DIL devices
Windows XP Embedded driven control PC internal to the programmer
unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
made in Slovakia
warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Tungsten carbide drills Ø1,5mm
1 x	FLUX-OFF 400ml
3 x	Backing disc for LWS
2 x	Precision drill grinder FBS 12/EF
1 x	Fibre-Cut Discs
1 x	Steel tape measure
1 x	Ball-shaped diamond coated 3.2mm
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Flat nose pliers 165mm
1 x	Corundum fan sander for LWS
1 x	Hot wire cutter THERMOCUT 230/E
2 x	Grinding mop cylinder grit 240
1 x	Belt sander BS/E
1 x	Grinding and Polishing Machine SP/E
2 x	Replacement belts for BSL 220/E
1 x	sandpaper for PS 13 Grot 180
2 x	MICROMOT 50
1 x	Round nose pliers 165mm
2 x	Warding files set, 6pcs
1 x	Cylinder sander WAS/E
2 x	Grinding mop cylinder grit 80
1 x	Felt polishers
1 x	Long neck straight drill/grinder LB/E
1 x	ANTISTATIC 200ml
1 x	Fibre-Cut Discs
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	PLCC Extractor
1 x	Jig saw STS 12/E
1 x	Telephone pliers bent 205mm
1 x	Microfibre cloth
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Broca de ponto 5.00 x 2.00
1 x	Flexible silicon discs
1 x	MICRO Miller MF 70
1 x	HSS drill bits 1.6mm
1 x	Sanding Drums
1 x	Long neck angle grinder LHW
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	TIP SPT-3
1 x	sandpaper for PS 13 Grit 240
1 x	Inpection mirror 1-978
1 x	Sanding Discs
1 x	Super-fine sanding discs grain 400
1 x	sanding belts for BBS/s Grit 240
1 x	Dial gauge
2 x	High quality corundum grinding bits
1 x	HSS boring tool set, 6 pieces
1 x	Cotton polishers
1 x	Brass contact cleaner brush
1 x	Super safety and specialty bit set, 75-piece
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 0.8mm
1 x	Scroll saw DS 230/E
1 x	Replacement belts for BSL 220/E
2 x	IC tweezers
1 x	Tungsten carbide drills Ø2mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Flexible silicon discs
1 x	Replacement glue sticks for HKP 220
1 x	Tungstein carbide rasp - and cutting disc
1 x	Table Saw FET
1 x	FREEZER-TOP 200ml
1 x	TIP SPT-9
1 x	Wire strippers 165mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Sanding Drums
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Crosscut 'Super-Cut' blade
1 x	Super-fine sanding discs grain 000
1 x	Saw blade made of high-alloy special steel
1 x	Tungsten Carbide Tipped (TCT)
1 x	Lambswool polishing disc
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Fibre-Cut Discs
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Hot wire cutter THERMOCUT 12/E
2 x	MICRO Miller FF 230
1 x	High quality corundum grinding bits
1 x	Diamond-coated cutting disc for MIC
1 x	Steel cups
1 x	Fibre-Cut Discs
1 x	Surface planer AH 80
1 x	6-piece TORX-screwdriver-set
1 x	Corundum grinding disc for LWS
1 x
1 x	Replacement belts for BSL 220/E
1 x	HSS drill bits 0.5mm
1 x	Lever Dial Indicator
1 x	Tungsten tipped saw blade
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Corundum sanding discs for LWS
1 x	Tungsten carbide drills Ø1mm
1 x	Solid carbide saw blade
1 x	Handy 1515
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Wheels brushes
1 x	Flexible polishing pad set
1 x	Precision lathe PD 250/E
1 x	HSS drill bits 1.0mm
1 x	2-speed scroll saw DSH
1 x	HSS twist drill set to DIN 338
2 x	Inspector mirror
1 x	Super-fine sanding discs grain 2000
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Telephone pliers straight 205mm
1 x	Three jaw chuck for the lathe DB 250
1 x	Protective device for hand-operated MICROMOT
2 x	Professional set for finish grinding and polishing
1 x	Flexible polishing pad set
1 x	Polishing felt, medium hard
1 x	Three piece thread cutting set
1 x	Sanding fleece for LWS
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	6-piece screwdriver and cross-recess set
1 x	Belt sander BBS/S
2 x	Grinding mop cylinder grit 120
1 x	Angle cutter 45 °
1 x	Silicon-Carbide.
1 x	Felt polishers
1 x	HSS drill bits 1.2mm
1 x	Conjunto de três brocas de ponto
1 x	Aluminium Die-Cast
1 x	Cut off/mitre saw KGS 80
1 x	surface planing and thicknessing ADH 250
1 x	SILICONE 200ml
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Long neck angle milling/drilling unit LWB 220/E

€8,046.11

Quick Find

We Accept

Manufacturer Info


-	Elnec Homepage
-	Other products

What's New?

Super-fine sanding discs grain 000
€3.82

Languages

Share Product

€6,950.00 + VAT

BeeHive208S[60-0054]

BeeHive208S
[60-0054]