Top » Catalog » Programmers and acessories » GANG programmers » 60-0053

€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Tungstein carbide rasp - and cutting disc
2 x Sanding fleece for LWS
2 x Corundum sanding discs for LWS
1 x Saw blade made of high-alloy special steel
2 x Corundum grinding disc for LWS
1 x Sanding fleece for LWS
1 x Corundum fan sander for LWS
2 x Diamond-coated cutting and roughing disc
1 x Hand Magnifier 2-293
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x Corundum grinding disc for LWS
1 x Hand magnifier with LED light 3X
1 x Super-Cut
2 x Replacement cutting disc for MICRO cutter MIC
1 x Diamond-coated cutting disc for MIC
1 x Step clamps made of steel
1 x surface planing and thicknessing ADH 250
1 x MICROMOT Mains Adapter NG 2/E
3 x surface planing and thicknessing ADH 200
1 x Tungsten tipped saw blade
1 x Supercut jig saw blades of special steel
1 x MICROMOT Mains Adapter NG 2/S
1 x sanding belts for BBS/s Grit 150
1 x High quality corundum grinding bits
1 x sandpaper for PS 13 Grot 180
1 x Fixed Steady
2 x Rounding over cutter 6.4mm
1 x BGA-Bottom-2
1 x Belt sander BBS/S
1 x Felt cloth polishing disc (100 x 15mm)
1 x Diamond Cutting Discs
2 x Radius Cutting Attachment, complete with pointed tool
2 x Spiral blade. 125mm long with plain ends (without pins).
2 x Rebating cutter 6.4mm
1 x 
1 x DIL28/PLCC84 ZIF HS538ESC01H
2 x Slot cutter 5.0mm
1 x Centre Turning Attachment
1 x Drill chuck with sliding sleeve for the tailstock
1 x DIL16W/SOIC16 ZIF 300mil
1 x High quality corundum grinding bits
1 x V-slot cutter 6.5mm
1 x BGA-Bottom-209
1 x Super-fine sanding discs grain 400
1 x Three jaw chuck for the lathe DB 250
1 x Flame shaped milling cutters
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
2 x Combi cutter 6.5/2.5mm
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Engraving tool GG
1 x Fibre-Cut Discs
1 x MICROMOT drill stand MB 200
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Super-fine sanding discs grain 000
1 x BeeProg2
1 x DIL44/PLCC44 ZIF
1 x Four Jaw Chuck
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x DIL28/QFN28-2 ZIF-CS
1 x Slot cutter 6.5mm
1 x DIL24W/SOIC24 ZIF 300mil
1 x Collet Set for accurate use on round components
1 x Special Fused Alumina (Hardness N).
1 x Cutting disc, with reinforcement
1 x Felt polishers
1 x Replacement carving blades for MSG
1 x Gear Chuck
1 x Wolfram vanadium steel milling bits
1 x Flexible silicon discs
1 x Belt sander BS/E
1 x DIL14W/SOIC14 ZIF 150mil
1 x Flap Wheels
1 x Ball shaped milling cutters
1 x DIL28W/SOIC28 ZIF 300mil
1 x DIL28/PLCC32 ZIF EPROM
1 x DIL20/SOIC20 ZIF 300 mil
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x BGA-Bottom-212
1 x DIL24/TSSOP24 ZIF 170mil
1 x Bottom PSOP44 NOR-3
1 x Sanding Discs
1 x BGA-Bottom-201
1 x Sanding Drums
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Flexible silicon discs
1 x Half round cutter 13mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x DIL20W/PLCC20 ZIF
1 x Replacement glue sticks for HKP 220
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x 2-speed scroll saw DSH
1 x Replacement belts for BSL 220/E
1 x Universal and oil siphoning pump AP 12
1 x BGA-Bottom-218
1 x Flap Wheels
1 x DIL28/QFP52 ZIF-CS SX52
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
€6,743.16
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Cylinder sander WAS/E
Cylinder sander WAS/E
€119.92
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online