€2,950.00 + VAT

BeeHive204
[60-0053]

BeeHive204

BeeHive204

Extremely fast universal 4x 48-pindrive concurrent production programmer (multiprogramming system).

 
Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • four independent universal programming modules (BeeProg2 based) in one unit
  • two BeeHive204 multiprogrammers can be attached to one PC to better utilize programming workplace
  • extremely fast programming, one of the fastest programmers in this category. Programs 64Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
  • powerful independent pin driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • Very low voltage support for latest Flash memory chips
  • ESD protection on each pin of the sockets
  • USB (up to 480 Mbit/s) interface to PC
  • comfortable and easy to use control program, Windows 98/Me/NT/2000/XP/2003/XPx64/Vista/7 compatible
  • unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
  • approved by CE laboratory to meet CE requirements
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive204/

Reviews
Manufacturers
1 x TUNER 200ml
1 x Four Jaw Chuck
1 x Centre Turning Attachment
1 x Side cutters EUROline-Conductive
1 x EUROline side cutter pointed head
1 x Table Saw TKS 2500 SC
1 x Slot cutter 6.5mm
1 x Fibre-Cut Discs
1 x Half round cutter 13mm
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Corundum grinding disc for LWS
1 x Brass contact cleaner brush
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Blade holders for DS 460
1 x Corundum sanding discs for LWS
1 x Diamond Cutting Discs
1 x Combi cutter 6.5/2.5mm
1 x EUROline mini side cutter
1 x Cotton polishers
1 x Precision Vice FMS 75
1 x Broca de alta duração de 2.0mm
1 x Flap Wheels
1 x Crosscut 'Super-Cut' blade
1 x Cotton polishers
1 x Multipurpose Vices Primus 75
1 x HSS cutting blade for OZI
1 x Fibre-Cut Discs
1 x Broca de alta duração de 0.5mm
1 x Multipurpose Vices Primus100
1 x Side cutters 180mm
1 x Sanding bands 14x13mm
1 x Tungsten carbide drills Ø1,5mm
1 x Side cutters 160mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Glass fibre contact cleaner brush
1 x Vacum SAA 901
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x HSS immersion saw blades for OZI
1 x HSS boring tool set, 6 pieces
1 x Broca de alta duração de 2.2mm
1 x Corundum bound cutting disc for LWS
1 x V-slot cutter 6.5mm
1 x Diamond cutting blade for OZI
1 x Corundum sanding discs for LWS
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Cotton polishers
1 x Rebating cutter 6.4mm
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Cylinder shaped milling cutters
1 x EUROline mini side cutter
1 x Sanding pads for OZI 220/E grit 240
1 x Angle cutter 45 °
1 x Sanding Drums
1 x Cutting disc, with reinforcement
1 x Broca de alta duração de 1.2mm
1 x Broca de alta duração de 0.7mm
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Broca de alta duração de 0.9mm
1 x Broca de alta duração de 2.4mm
1 x Plastic magnifying glass
1 x Coarse-toothed (25 TPI per 25mm)
1 x Sanding Discs
1 x Sanding pads for OZI 220/E grit 150
1 x Cylinder sander WAS/E
1 x Wood Lathe DB450
1 x Broca de alta duração de 2.3mm
1 x Table Sawr TKS 315 E
1 x End side cutters EUROline-Conductive
1 x Tungsten carbide drills Ø1mm
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x broca de alta duração de 0,2mm
1 x Three piece thread cutting set
1 x HSS twist drill set to DIN 338
1 x Inpection mirror 1-978
2 x Conjunto de três brocas de ponto
1 x HSS drill bits 0.8mm
1 x 10-piece wood router cutter set
1 x Fibre-Cut Discs
1 x Nylon Fleece Brushes
1 x Corundum fan sander for LWS
1 x Tungsten carbide drills Ø2mm
1 x Precision Vice FMZ
1 x Coarse-toothed (18 TPI per 25mm)
1 x Mini side cutters EUROline-Conductive
1 x Hand magnifier with LED light 3X
1 x HSS drill bits 1.0mm
1 x Mini side cutters EUROline-Conductive
1 x Diamond Cutting Discs
1 x Cut off/mitre saw KGS 80
1 x Sanding Drums
1 x Mini side cutters EUROline-Conductive
1 x Hand Magnifier 2-293
1 x Sanding pads for OZI 220/E grit 80
1 x Side cutters 195mm
1 x Side cutters 160mm
1 x Core box bit 3.2mm
1 x Fibre-Cut Discs
1 x Broca de alta duração de 2.5mm
1 x Precision lathe PD 250/E
1 x Glass fibre contact cleaner brush
€5,966.48
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook