Top » Catalog » Programmers and acessories » GANG programmers » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
3 x Combi cutter 6.5/2.5mm
1 x Replacement glue sticks for HKP 220
2 x High quality corundum grinding bits
1 x Ball-shaped diamond coated 2.2mm
2 x Diamond Cutting Discs
2 x Flap Wheels
2 x 14-piece parallel supports set
2 x Replacement belts for BSL 220/E
1 x Core box bit 3.2mm
3 x Diamond Grinding Bits 1mm
3 x Wolfram vanadium steel milling bits
1 x MICRO Heat gun MH 550
2 x Tungsten carbide cutter 3.0mm
1 x MICRO cutter MIC
1 x Coarse-toothed (10 TPI per 25mm)
1 x Lathe System PD 400
2 x Band knife of hardened spring band steel (without teeth)
2 x Backing disc for LWS
2 x Solid carbide stylus for engraving
2 x Precision lathe PD 250/E
2 x Ball shaped milling cutters
3 x Tungsten carbide cutters set
2 x Replacement cutting wire for the THERMOCUT 12/E
2 x HSS immersion saw blades for OZI
3 x Set of special steel cutters
1 x 10-piece wood router cutter set
2 x Tungsten carbide cutter 2.0mm
1 x Screwdriver 1.0
1 x High quality corundum grinding bits
2 x Extra narrow bandsaw blade (3.5mm) for tight radii
3 x Wolfram vanadium steel milling bits
1 x Diamond Grinding Bits 1,8mm
1 x Cylindrical cutters
2 x Disc cutters
1 x Drill chuck with sliding sleeve for the tailstock
3 x HSS cutting blade for OZI
2 x Diamond blade for MBS 240/E
1 x Radius Cutting Attachment, complete with pointed tool
1 x Milling cutter set (6 - 10mm)
1 x Cone shaped milling cutter
2 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Microfibre cloth
1 x Coarse-toothed (25 TPI per 25mm)
2 x Diamond Cutting Discs
1 x Super-fine sanding discs grain 400
1 x Professional polishing sponge
2 x Belt sander BBS/S
1 x Supercut jig saw blades of special steel
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Set of precision cutters
1 x End side cutters EUROline-Conductive
1 x Replacement belts for BSL 220/E
1 x Long neck straight drill/grinder LB/E
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Steel cups
1 x Cotton polishers
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
2 x Sanding pads for OZI 220/E grit 80
2 x Flexible polishing pad set
1 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Wood Lathe DB900
1 x Fibre-Cut Discs
1 x Angle cutter 45 °
1 x Telephon pliers straight 160mm
1 x Delta sander OZI/E
1 x MICROMOT Mains Adapter NG 2/S
1 x Stainless steel wheels
1 x Cups brushes
2 x Table Saw TKS 2500 SC
1 x Broca de alta duração de 1.4mm
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Lathe tools 8mm pastilhados
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Brass brushes
1 x Cotton polishers
1 x BGA-Bottom-115
1 x Flexible silicon discs
1 x Inspector mirror
1 x Flexible polishing pad set
1 x Precision caliper 500mm
1 x Precision Vice FMZ
3 x Vacum SAA 901
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x High quality corundum grinding bits
1 x Compact workshop vacuum cleaner CW-matic
2 x sanding belts for BBS/s Grit 80
1 x Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x EUROline flat nose pliers
2 x surface planing and thicknessing ADH 200
1 x Felt polishers
1 x Cotton polishers
1 x Blade holders for DS 460
1 x Felt polishers
1 x Fluted filter for CW-matic
1 x Wood Lathe DB450
1 x Felt polishers
1 x Stainless steel cups
2 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Table Sawr TKS 315 E
1 x sanding belts for BBS/s Grit 240
2 x Tungsten Carbide Tipped (TCT)
1 x Bench Circular Saw KS 230
1 x Diamond Coated
2 x Sanding pads for OZI 220/E grit 240
1 x Fine dust paper filter for CW-matic
4 x Cutting disc, with reinforcement
1 x Diamond Cutting Discs
1 x HSS immersion saw blades for OZI
1 x Polishing paste
1 x surface planing and thicknessing ADH 250
1 x Blade for Wood and Plastics
1 x Inpection mirror 1-978
1 x Blade for Steel and brass
1 x Sanding bands 14x13mm
1 x Fibre-Cut Discs
1 x Felt polishers
1 x MICRO shaper MP 400
3 x Footswitch FS
2 x MICROMOT drill stand MB 200
3 x Lathe tools 10mm pastilhados
3 x Aluminium Die-Cast
3 x Telephone pliers straight 205mm
1 x Protective device for hand-operated MICROMOT
2 x Combination pliers 210mm
1 x Flexishaft MICROMOT 110/P
5 x 3-jaw chuck centrically clamping 125mm
4 x Morse taper MT2 - B16
1 x HSS drill bits 0.5mm
3 x quantum revolving center CM2
3 x Tool holder type H for SWH 1-A
3 x Follow rest for D250X550
4 x Cutting tool 10 mm
3 x MICROMOT steel collet set
2 x Flat nose pliers 165mm
4 x Precision quick-action drill chuck 0-10mm B16
2 x Combination pliers 190mm
3 x Quick-action tool holder kit SWH AA
3 x lathe tools 10mm
1 x Wire strippers 165mm
1 x 6pcs Double Open End wrench set
2 x BeeHive204
1 x Cutter head for copy and surface milling MT2
3 x 4-jaw chuck individually clamping 125mm
1 x Telephon pliers bent 200mm
3 x Three-jaw steel drill chuck
3 x Flexishaft MICROMOT 110/BF
2 x MICROMOT extension cord. 300cm.
2 x Side cutters 160mm
2 x Dividing attachment TA 230 for PF 250
1 x Mill/Drill Unit BFB 2000.
1 x Safety insulated screwdrivers 14-603 VDE
1 x Glass fibre contact cleaner brush
3 x Side cutters 195mm
1 x MICROMOT tool holder
1 x Tool holder type D for SWH 1-A
2 x Micro Compound Table KT 70
1 x Glass fibre contact cleaner brush
1 x MICRO Miller MF 70
1 x EUROline top cutter
1 x Steady rest for D250X550
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
€28,522.39
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Super-fine sanding discs grain 000
Super-fine sanding discs grain 000
€3.82
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online