€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	MICROMOT extension cord. 300cm.
3 x	EUROline end cutter
1 x	Tool holder type H for SWH 1-A
1 x	EUROline flat nose pliers
1 x	Boring Bar for DCMT 10mm
2 x	EUROline snipe nose pliers
1 x	Core box bit 3.2mm
1 x	10-piece wood router cutter set
2 x	Wood Lathe DB900
1 x	EUROline mini side cutter
2 x	Crimping plier for BNC
3 x	Hot wire cutter THERMOCUT 230/E
1 x	sclcr2525M12
1 x	Precision lathe PD 250/E
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	EUROline mini side cutter
1 x	Telephon pliers straight 200mm
1 x	EUROline mini side cutter
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 1
1 x	Slot cutter 5.0mm
1 x	EUROline set of pliers
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	TIP SPT-10
2 x	Table Sawr TKS 315 E
3 x	Saw blade made of high-alloy special steel
2 x	Cutting tool 10 mm
1 x	TORX-screwdrivers T8
1 x	surface planing and thicknessing ADH 250
3 x	Crosscut 'Super-Cut' blade
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Engraving tool GG
1 x	Screwdriver 2.5
2 x	sanding belts for BBS/s Grit 150
4 x	Footswitch FS
1 x	MICRO Heat gun MH 550
1 x	Diamond Cutting Discs
1 x	Multipurpose Vices Primus100
2 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Cross-recess Screwdrivers 0
3 x	Blade holders for DS 460
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT tool holder
1 x	Router base OFV
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	Spare cutting wire
1 x	TIP SPT-2
1 x	Super-Cut
1 x	MICRO-screwdrivers
3 x	Diamond Cutting Discs
3 x	Diamond blade
2 x	Table Saw TKS 2500 SC
1 x	HSS twist drill set with centring pin
1 x	Screwdriver 0.8
3 x	Tungsten tipped saw blade
1 x	Protective device for hand-operated MICROMOT
1 x	EUROline round nose pliers
1 x	Flexible polishing pad set
1 x	surface planing and thicknessing ADH 200
1 x	Universal holder UHZ
2 x	Diamond Grinding Bits 1,8mm
2 x	Polishing machine PM 100
1 x	High quality corundum grinding bits
1 x	Telephone pliers bent 205mm
1 x	Wood Lathe DB450
1 x	TIP SPT-9
1 x	MICROFLAME burner MFB/E
1 x	Diamond Grinding Bits 1,8mm
1 x	TIP SPT-4
1 x	Ball-shaped diamond coated 1.2mm
1 x	Self-adhesive silicone film for easy sanding disc replacement
3 x	Solid carbide saw blade
1 x	Combination pliers 190mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	MICROMOT glue gun HKP 220
1 x	Diamond Cutting Discs
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Belt sander BBS/S
2 x	Diamond Grinding Bits 1mm
1 x	Felt polishers
1 x	Hand magnifier with LED light 3X
1 x	6-piece screwdriver and cross-recess set
1 x	Flexishaft MICROMOT 110/P
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Five piece HSS chisel set
1 x	Nylon Fleece Brushes
1 x	Independent four jaw chuck for the DB 250
1 x	Three jaw chuck for the lathe DB 250
1 x	Ball-shaped diamond coated 2.2mm
2 x	TIP SPT-3
2 x	Precision quick-action drill chuck 0-13mm B16
1 x	Telephone pliers stright 205mm
1 x	Diamond Grinding Bits 5mm
1 x	TORX-screwdrivers T9
1 x	Ball-shaped diamond coated 3.2mm
1 x	Complete Engraving Kit with trial glass
1 x	Combination pliers 210mm
1 x	Telephone pliers straight 205mm
1 x	BGA-Bottom-151
1 x	BGA-Bottom-101
2 x	EUROline side cutter pointed head
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-154
2 x	BGA-Bottom-102
3 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Replacement belts for BSL 220/E
1 x	BeeHive208S
3 x	Top PSOP44 ZIF 600mil
1 x	DIL28/TSOP28 ZIF 11.8 mm
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Lever Dial Indicator
1 x	Corundum sanding discs for LWS
1 x	Replacement carving blades for MSG
2 x	BGA-Bottom-106
1 x	DIL32/PLCC32 ZIF
2 x	Earthing module
2 x	Bottom PSOP44 NOR-1
2 x	Steel tape measure
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	SmartProg2
1 x	Replacement belts for BSL 220/E
1 x	Bottom PSOP44 NOR-3
1 x	BGA-Bottom-111
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL8W/SOIC8 ZIF 150mil
2 x	Coarse-toothed (10 TPI per 25mm)
2 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
2 x	BGA-Bottom-115
2 x	Earth wire
2 x	Beeprog2C
1 x	MICROMOT 230/E
1 x	Magnetic base
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	BGA-Bottom-165
1 x	BGA-0246/0244
1 x	BGA-Bottom-170
2 x	DIL48/TSOP48 ZIF 18.4mm
2 x	Earth wire
1 x	BGA-0245/0243
1 x	Broca de alta duração de 2.4mm
2 x	BGA-0245/0242
2 x	Contact bracelet with spiral cord
2 x	Crocodile clip
1 x	DIL8/SOIC8 ZIF MB95-1
2 x	BGA-0245/0241
1 x	BGA-Bottom-19
1 x	Replacement belts for BSL 220/E
2 x	BGA-Bottom-1
1 x	Precision caliper square
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	TIP SPT-6
1 x	Dial gauge
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	BGA-Bottom-18
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	6-piece set of ESD/EGB tweezers
1 x	BGA-Bottom-103
1 x	BGA-Bottom-126
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL8/SOIC8 ZIF 150mil
1 x	BGA-Bottom-10
1 x	BGA-Bottom-167
3 x	BeeHive204
1 x	BGA-Bottom-11
1 x	Warding files set, 6pcs
1 x	BGA-Bottom-180
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	BGA-Bottom-169
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Special Fused Alumina (Hardness N).
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	BGA-Bottom-166
1 x	DIL32/MLF32-1 ZIF
1 x	Precision magnetic gauge stand
1 x	Chuck for TBM 220
1 x	DIL48/PLCC68 ZIF MCS51-1
1 x	Silicon-Carbide.
1 x	BGA-Bottom-173
1 x	Boring Bar for CCMT 8mm
1 x	BGA-Bottom-177
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	BGA-0246/0243
1 x	Cutting tool 8 mm
1 x	MICRO Miller MF 70
1 x	BGA-Bottom-153
1 x	precision machine vices FMS150
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	BGA-Bottom-127
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	BGA-Bottom-105
1 x	BGA-Bottom-16
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Earth wire with dummy Schunko-plug
1 x	Handy 1515
1 x	DIL8/SOIC8 ZIF 200mil
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-Bottom-118

€42,462.45