€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	EUROline side cutter rounded head
1 x	MICROFLAME burner MFB/E
1 x	Conjunto de três brocas de ponto
1 x	Three piece thread cutting set
1 x	BIT-SET
1 x	End mill for aluminium 6mm
1 x	End mill for aluminium 3mm
1 x	ESD-handling ser 9-361
1 x	ACCENT SERVICE TOOLS SET
2 x	MICROMOT Mains Adapter NG 2/E
1 x	6-piece TORX-screwdriver-set
1 x	Safety insulated screwdrivers 14-602 VDE
1 x	Professional set for finish grinding and polishing
1 x	Precision Vice FMZ
1 x	6-piece TORX-screwdriver-set ESD
1 x	Combi cutter 6.5/2.5mm
1 x	Combination pliers 205mm
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	EUROline top cutter
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Multipurpose Vices Primus 75
1 x	Bench drill machine TBM 220
1 x	Silicon-Carbide.
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	BGA-Bottom-164
1 x	Telephon pliers straight 160mm
1 x	Round nose pliers 160mm
1 x	DIL8/SOIC8 ZIF 200mil
1 x	Three-jaw steel drill chuck
1 x	BGA-Bottom-101
1 x	Telephon pliers bent 200mm
1 x	BGA-0245/0241
2 x	Combination pliers 160mm
1 x	Beeprog2C
1 x	sanding belts for BBS/s Grit 80
1 x	Top PSOP44 ZIF 600mil
1 x	BGA-Bottom-214
1 x	MICROMOT tool holder
1 x	BGA-Bottom-174
1 x	BGA-Bottom-144
1 x	BGA-Bottom-191
1 x	Aluminium Die-Cast
1 x	14-piece parallel supports set
1 x	BGA-Bottom-115
1 x	MICROMOT drill stand MB 200
1 x	BeeProg2
1 x	BGA-Bottom-195
1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x	BGA-Bottom-14
1 x	Mill/Drill Unit BFB 2000.
1 x	EUROline mini side cutter
1 x	BGA-Bottom-180
1 x	Combination pliers 185mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	BGA-Bottom-208
1 x	BGA-Bottom-106

€6,122.33