Top » Catalog » Elnec » 60-0054

€6,950.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 
Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Earth wire with dummy Schunko-plug
1 x Broca de alta duração de 0.9mm
2 x Hand magnifier with LED light 3X
1 x High quality corundum grinding bits
1 x Crocodile clip
1 x EUROline side cutter rounded head
2 x surface planing and thicknessing ADH 200
2 x Disc cutters
1 x High quality corundum grinding bits
1 x Tungsten carbide cutter 2.0mm
1 x Tungsten carbide cutter 1.0mm
3 x High quality corundum grinding bits
1 x Milling cutter set (2 - 5mm)
1 x Telephone pliers stright 205mm
1 x 6-piece screwdriver and cross-recess set
1 x Milling cutter set (6 - 10mm)
1 x 6-piece screwdriver and cross-recess set ESD
3 x Snipe nose pliers 45º EUROline-Conductive
1 x Flap Wheels
1 x Boring Bar for CCMT
1 x SCLCR1010E06
1 x Tweezer teflon-coated 5-021-9
1 x Broca de alta duração de 0.8mm
1 x Side cutters 160mm
1 x Solid carbide stylus for engraving
2 x Earth wire
1 x Telephone pliers stright 165mm
3 x Cotton polishers
1 x Crimping plier for BNC
1 x Inpection mirror 1-978
1 x Solid carbide stylus for engraving
1 x Wire strippers 165mm
1 x Broca de alta duração de 1.5mm
1 x Steel wheels
1 x Replacement belts for BSL 220/E
1 x DIL8W/SOIC8 ZIF 150mil
1 x BGA-Bottom-208
1 x Replacement belts for BSL 220/E
1 x Grinding mop cylinder grit 240
1 x ESD-handling set
1 x Ball-shaped diamond coated 2.2mm
1 x Telephone pliers bent 205mm
1 x BGA-Bottom-20
1 x Cylinder shaped milling cutters
1 x Corundum fan sander for LWS
2 x Felt polishers
1 x BGA-Bottom-204
1 x BGA-Bottom-173
1 x BGA-0245/0241
2 x Handy 1515
1 x Core box bit 3.2mm
1 x Titan Tweezers 5-037
1 x Sanding Discs
1 x Replacement glue sticks for HKP 220
1 x DIL28W/SOIC28 ZIF 300mil
1 x End side cutters 45º EUROline-Conductive
2 x BGA-Bottom-102
2 x Sanding bands 14x13mm
1 x BGA-Bottom-187
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x BGA-Bottom-216
2 x Bottom PSOP44 NOR-2
1 x High quality corundum grinding bits
1 x Combination pliers 190mm
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Polishing paste
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x Fibre-Cut Discs
2 x BGA-Bottom-118
1 x Mill/Drill Unit BFB 2000.
1 x EUROline flat nose pliers
1 x BGA-Bottom-11
1 x Corundum fan sander for LWS
1 x BGA-Bottom-217
2 x Multipurpose Vices Primus 75
1 x BGA-Bottom-170
1 x Pensander PS 13
2 x Protective device for hand-operated MICROMOT
1 x BGA-Bottom-199
2 x Ceramic tweezers 5-081
1 x BGA-Bottom-148
2 x Conjunto de três brocas de ponto
1 x DIL32/SOIC32 ZIF 445mil
1 x DIL28/PLCC28 ZIF
1 x BGA-Bottom-139
1 x Universal holder UHZ
2 x Belt sander BBS/S
1 x EUROline set of pliers
1 x DIL24W/SOIC24 ZIF 300mil
1 x Angle cutter 45 °
1 x DIL28/PLCC32 ZIF EPROM
1 x DIL18W/SOIC18 ZIF 300mil
1 x BGA-Top-132 ZIF-CS
1 x Universal polishing paste
3 x EUROline-Conductive set of pliers
1 x EUROline mini side cutter
2 x Side cutters 160mm
1 x DIL20/SOIC20 ZIF 200mil
1 x BGA-Bottom-215
1 x EUROline round nose pliers
1 x lathe tools 10mm
1 x Blade holders for DS 460
1 x Corundum sanding discs for LWS
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x BGA-Bottom-15
1 x DIL8/SOIC8-1 ZIF 170mil
1 x Floor cover ESD
1 x Flat nose pliers 185mm
2 x Glass fibre contact cleaner brush
2 x Mini side cutters EUROline-Conductive
1 x DIL20/SOIC20 ZIF 300 mil
1 x Bandsaw blade of bimetal for MBS 240/E
1 x BGA-Bottom-146
1 x BGA-Bottom-127
2 x Dividing attachment TA 230 for PF 250
1 x 10-piece wood router cutter set
1 x BGA-Bottom-231
1 x DIL16W/SOIC16 ZIF 150mil
1 x EUROline end cutter
1 x Tungstein carbide rasp - and cutting disc
2 x Snipe nose pliers 45º EUROline-Conductive
2 x Telephone pliers straight 205mm
1 x Round nose pliers 165mm
1 x Snipe nose pliers 45º EUROline-Conductive
1 x BGA-Bottom-214
1 x Screwdriver 3.0
1 x DIL8/SOIC8 ZIF MB95-1
1 x EUROline mini side cutter
1 x Felt cloth polishing disc (100 x 15mm)
1 x BIT-SET
2 x Ceramic tweezers 5-082
1 x BGA-0245/0243
1 x Corundum grinding disc for LWS
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
3 x Mini side cutters EUROline-Conductive
1 x BGA-Bottom-126
1 x Screwdriver 3.0
1 x BGA-Bottom-21
1 x Engraving tool GG
1 x BGA-Bottom-10
1 x Ball shaped milling cutters
1 x Wolfram vanadium steel milling bits
1 x BGA-Bottom-218
1 x Sanding Drums
1 x 6-piece screwdriver set ESD
1 x Bench drill machine TBM 220
1 x Replacement belts for BSL 220/E
1 x Independent four jaw chuck for the DB 250
2 x Cups brushes
2 x BeeHive208S
1 x BGA-Bottom-223
1 x Bench drill press TBH
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x BGA-Bottom-140
1 x BGA-Bottom-135
1 x BGA-Bottom-147
1 x Stainless steel wheels
1 x Multipurpose Vices Primus100
1 x DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x Three jaw chuck for the lathe DB 250
1 x BGA-Bottom-174
1 x BGA-Bottom-151
1 x Round nose pliers 185mm
1 x BGA-Bottom-225
1 x DIL24/TSSOP24 ZIF 170mil
1 x BGA-Top-3 ZIF-CS
1 x DIL8/SSOP8 ZIF 120mil
1 x Cut off/mitre saw KGS 80
1 x DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x Precision Vice FMZ
1 x Cylinder sander WAS/E
1 x DIL48/TSOP48 ZIF 18.4mm
1 x Bottom PSOP44 NOR-1
1 x Broca de ponto 5.00 x 2.00
1 x Aluminium Die-Cast
1 x EUROline mini side cutter
1 x Sanding bands 14x13mm
1 x 6pcs Double Open End wrench set
1 x BGA-Bottom-2
1 x 
1 x DIL32/PLCC32 ZIF
1 x Conj 5 pinças ESD
1 x Bottom PSOP44 NOR-3
2 x End side cutters EUROline-Conductive
1 x BGA-Bottom-125
1 x BGA-Bottom-141
1 x Flexishaft MICROMOT 110/BF
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x BGA-Bottom-88
1 x EUROline side cutter pointed head
1 x Earthing module
1 x Precision steel vice PM 40
1 x BGA-Bottom-177
1 x MICROMOT drill stand MB 200
1 x BGA-Top-5 ZIF-CS
1 x MICRO Miller MF 70
1 x DIL8/QFN8-1 ZIF-CS
1 x Coarse-toothed (10 TPI per 25mm)
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x BGA-Bottom-16
1 x Band knife of hardened spring band steel (without teeth)
1 x Cotton polishers
1 x DIL8W/SOIC8 ZIF 200mil
1 x ESD-handling ser 9-361
1 x Grinding mop cylinder grit 80
1 x BGA-Bottom-101
1 x Disc Sander TG 250/E
1 x SMD Tweezers 5-058
1 x Diamond Grinding Bits 1,8mm
1 x Super-fine sanding discs grain 2000
1 x Professional set for finish grinding and polishing
1 x Super safety and specialty bit set, 75-piece
1 x MICRO Miller FF 230
1 x Replacement cutting disc for MICRO cutter MIC
1 x lathe tools 12mm
1 x Mill/Drill System BFW 40/E
1 x Beeprog2C
1 x Centre Turning Attachment
1 x Diamond Twist Drills
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x Diamond Cutting Discs
1 x Four Jaw Chuck
1 x Disc Sander TG 125/E
1 x Fixed Steady
1 x PLCC Extractor
€34,744.04
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
- Elnec Homepage
- Other products
What's New?
Corundum fan sander for LWS
Corundum fan sander for LWS
€4.45
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online