€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Conj 5 pinças ESD
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Broca de alta duração de 2.9mm
1 x	Broca de alta duração de 2.2mm
2 x	Side cutters 160mm
1 x	BIT-SET
1 x	Sanding Discs
1 x	Broca de alta duração de 2.8mm
2 x	Telephone pliers straight 205mm
1 x	Telephone pliers bent 165mm
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Bench drill machine TBM 220
1 x	Broca de alta duração de 2.6mm
1 x	Broca de alta duração de 2.7mm
1 x	Super jig saw STS/E
1 x	BGA-Bottom-132
1 x	Corundum fan sander for LWS
1 x	BGA-Bottom-148
1 x	Corundum grinding disc for LWS
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Felt polishers
1 x	BGA-Bottom-140
1 x	V-slot cutter 6.5mm
1 x	Dividing attachment TA 230 for PF 250
1 x	BGA-Bottom-138
1 x	MICRO Band Saw MBS 240/E
1 x	BGA-Bottom-14
1 x	Side cutters 170mm
1 x	HSS drill bits 1.2mm
1 x	Thicknesser DH 40
1 x	BGA-Bottom-146
1 x	Diamond Grinding Bits 1,8mm
1 x	Four Jaw Chuck
1 x	Disc Sander TG 250/E
1 x	Precision lathe PD 250/E
1 x	HSS drill bits 1.6mm
1 x	Fibre-Cut Discs
1 x	BGA-Bottom-150
1 x	BGA-Bottom-151
1 x	Flap Wheels
1 x	BGA-Bottom-15
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-141
1 x	High quality corundum grinding bits
1 x	Polishing machine PM 100
1 x	Cutting disc, with reinforcement
1 x	Mill/Drill Unit BFB 2000.
1 x	BGA-Bottom-147
1 x	Lathe System PD 400
1 x	BGA-Bottom-145
1 x	BGA-Bottom-126
1 x	Table Saw FET
1 x	Rebating cutter 6.4mm
1 x	HSS drill bits 0.5mm
1 x	Rounding over cutter 6.4mm
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-149
1 x	Flat nose pliers 185mm
1 x	Fibre-Cut Discs
1 x	Cut off/mitre saw KGS 80
1 x	High quality corundum grinding bits
1 x	Mill/Drill System BFW 40/E
1 x	Felt polishers
1 x	Surface planer AH 80
1 x	BGA-Bottom-135
2 x	BGA-0246/0243
2 x	BGA-Bottom-102
1 x	Combination pliers 205mm
1 x	BGA-Bottom-201
2 x	BeeHive208S
2 x	BGA-Bottom-10
1 x	BGA-Bottom-20
1 x	surface planing and thicknessing ADH 200
1 x	BGA-Bottom-208
1 x	BGA-Bottom-196
1 x	EUROline end cutter
1 x	BGA-Bottom-103
1 x	Vacum SAA 901
1 x	Wood Lathe DB900
1 x	BGA-Bottom-101
1 x	BGA-0245/0242
1 x	BGA-0245/0241
1 x	BGA-Bottom-191
1 x	BeeProg2
1 x	BGA-Bottom-115
1 x	BGA-Bottom-195
1 x	Grinding mop cylinder grit 80
1 x	BGA-0245/0243

€28,309.18