€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Digital caliper gauge 300 mm
1 x	DIL48/QFP100 ZIF PLD-4
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	OPTI BF16 Vario
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL32/SDIP32 ZIF 400mil
2 x	Top PSOP44 ZIF 600mil
2 x	BGA-Bottom-229
1 x	Handy 1515
1 x	DIL48/QFP64 ZIF 68HC-1
2 x	DIL44/TQFP44-1 Zif
1 x	Broca de alta duração de 2.1mm
1 x	DIL48/QFP100 ZIF PLD-2
2 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	Corundum fan sander for LWS
1 x	DIL48/QFP144 ZIF H8S-3
1 x	BGA-Bottom-221
1 x	DIL48/QFP80 ZIF HCS12-1
1 x	DIL42/SDIP42 ZIF 600mil
1 x	DIL48/QFP64 ZIF HD64-1
1 x	DIL40/PLCC52 ZIF MCS51-2
3 x	BGA-Bottom-218
2 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL48/QFP80-1 ZIF MCS51-1
1 x	Tungstein carbide rasp - and cutting disc
2 x	DIL40/PLCC52 ZIF DS87C530
2 x	BGA-Bottom-9
1 x	Diamond Cutting Discs
1 x	BGA-Bottom-139
2 x	BGA-Bottom-125
1 x	Fibre-Cut Discs
1 x	Tool holder type H for SWH 1-A
1 x	BGA-Bottom-15
1 x	Steady rest for D250X550
2 x	Flexible silicon discs
2 x	Stainless steel brushes
1 x	BGA-Bottom-135
2 x	Fluted filter for CW-matic
1 x	Collet chuck ER25 for D250X550
1 x	ESD Tweezers 5-192
1 x	BGA-Bottom-14
2 x	Flexible silicon discs
1 x	Fibre-Cut Discs
2 x	Brass brushes
1 x	Steel cups
2 x	Flexible polishing pad set
1 x	machine base with shelves for D250X550
1 x	Cutting tool 10 mm
2 x	Stainless steel cups
1 x	BGA-Bottom-138
1 x	BGA-Bottom-132
1 x	BGA-Bottom-148
1 x	Cutter head for copy and surface milling MT2
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Follow rest for D250X550
1 x	Fibre-Cut Discs
1 x	Cutter head for copy and surface milling MT3
1 x	BGA-Bottom-127
2 x	Felt polishers
1 x	Steel brushes
1 x	Morse taper MT2 - B16
2 x	Flexible polishing pad set
1 x	High quality corundum grinding bits
2 x	Polishing paste
1 x	Fine dust paper filter for CW-matic
1 x	BGA-Bottom-131
1 x	Wheels brushes
1 x	SCLCR1010E06
1 x	BGA-Bottom-13
1 x	High quality corundum grinding bits
1 x	DIL48/TQFP64 ZIF HC908-1
2 x	Multipurpose Vices Primus 75
2 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL48/SOIC24 ZIF MB95-1
2 x	Lathe tools 8mm pastilhados
2 x	BGA-0246/0243
2 x	Sanding bands 14x13mm
3 x	BeeHive204
1 x	DIL28/PLCC28 ZIF
2 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	BGA-Bottom-208
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	SmartProg2
1 x	BGA-Bottom-171
1 x	BGA-Bottom-151
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL18W/SOIC18 ZIF 300mil
3 x	DIL20W/SOIC20 ZIF 300mil
1 x	BGA-Bottom-222
2 x	TIP SPT-3
1 x	Protective device for hand-operated MICROMOT
3 x	Bottom PSOP44 NOR-3
1 x	DIL48/SOIC20 ZIF LPC-1
1 x	BGA-Bottom-157
1 x	DIL48/PLCC52 ZIF-CS 68HC11
2 x	Bottom PSOP44 NOR-2
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	DIL8/SOIC8 ZIF MB95-1
2 x	DIL8W/SOIC8 ZIF 150mil
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	BGA-Bottom-5
2 x	Felt polishers
1 x	BGA-Bottom-105
1 x	Stainless steel wheels
1 x	Flexible silicon discs
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-223
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	BGA-Bottom-180
1 x	DIL48/PLCC68 ZIF MCS51-1
2 x	MICROMOT steel collet set
2 x	DIL8/SOIC8 ZIF 200mil
1 x	DIL16W/SOIC16 ZIF 150mil
2 x	DIL20/SOIC20 ZIF 300 mil
2 x	BGA-Bottom-115
1 x	BGA-Bottom-20
1 x	DIL48/PLCC52 ZIF-CS 68HC05BX
1 x	BGA-Bottom-224
2 x	High quality corundum grinding bits
1 x	DIL20W/PLCC20 ZIF
1 x	BGA-Bottom-216
1 x	BeeProg2
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	BGA-Bottom-153
1 x	DIL48/PLCC68 ZIF MCS196-1
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-215
1 x	BGA-Bottom-88
1 x	BGA-0245/0242
1 x	BGA-Bottom-18
1 x	Felt polishers
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	BGA-Bottom-21
1 x	BGA-Bottom-10
1 x	BGA-Bottom-170
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	BGA-Bottom-174
1 x	Precision lathe PD 250/E
1 x	Sanding bands 14x13mm
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	BGA-Bottom-196
2 x	BGA-Bottom-1
2 x	High quality corundum grinding bits
1 x	BGA-Bottom-194
1 x	DIL32/PLCC32 ZIF
1 x	Crimping plier for BNC
1 x	BGA-Bottom-169
1 x	lathe tools 10mm
2 x	High quality corundum grinding bits
1 x	DIL24/QSOP24 ZIF 150mil
1 x	Cotton polishers
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	DIL24/TSSOP24 ZIF 170mil
2 x	Cotton polishers
1 x	BGA-Bottom-211
2 x	DIL8/SOIC8-1 ZIF 170mil
2 x	BGA-0245/0243
1 x	BGA-Bottom-231
1 x	BGA-Bottom-103
1 x	BGA-Bottom-225
1 x	BGA-Bottom-19
1 x	DIL20/PLCC20 ZIF-CS
1 x	Angle cutter 45 °
1 x	BGA-Bottom-16
1 x	BGA-Bottom-207
1 x	BGA-Bottom-111
1 x	Three-jaw steel drill chuck
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	Cotton polishers
1 x	DIL28/PLCC28 ZIF-CS
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	High quality corundum grinding bits
1 x	Blade holders for DS 460
1 x	BGA-Bottom-214
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	DIL8/SOIC8 ZIF 150mil
1 x	BGA-Bottom-2
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-167
1 x	BGA-Bottom-199
1 x	BGA-Bottom-173
1 x	Cups brushes
1 x	TORX-screwdrivers T10
1 x	BGA-Bottom-108
1 x	BGA-Bottom-11
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL8/SSOP8 ZIF 120mil
1 x	WCMT050308
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Screwdriver 2.5
1 x	Wood Lathe DB900
1 x	TORX-screwdrivers T20
1 x	TCMT090204
2 x	Cross-recess Screwdrivers 2
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Motor-driven carving device MSG
1 x	lathe tools 12mm
1 x	Screwdriver 5.5
1 x	BGA-Bottom-118
1 x	Precision magnetic gauge stand
1 x	SCMT09T304
1 x	BGA-0245/0241
2 x	Cross-recess Screwdrivers 2
1 x	BGA-Bottom-102
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.2
1 x	Screwdriver 5.5
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Cross-recess Screwdrivers 00
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Screwdriver 0.8
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	TCMT110204

€36,520.58