€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	EUROline flat nose pliers
1 x	Insulation Resistance Tester MG125
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	MICRO Miller FF 230
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	DIL44/TQFP44-3 ZIF
1 x	Fixed Steady
1 x	Gear Chuck
1 x	Screwdriver 5.5
2 x	Warding files set, 6pcs
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	quantum revolving center CM2
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Brass contact cleaner brush
1 x	Precision steel vice PM 40
1 x	OPTI BF16 Vario
1 x	MICROMOT Mains Adapter NG 2/S
1 x	DIL44/TQFP44-1 Zif
1 x	Three jaw chuck for the lathe DB 250
1 x	TORX-screwdrivers T8
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL40/TQFP44 ZIF PIC-1
2 x	Micro Compound Table KT 70
1 x	Multiform grindstone
1 x	Step clamps made of steel
1 x	MICROMOT Mains Adapter NG 2/E
2 x	Bottom PSOP44 NOR-3
1 x	Grinding mop cylinder grit 80
1 x	Beeprog2C
2 x	Precision quick-action drill chuck 0-10mm B16
2 x	Footswitch FS
1 x	BeeProg2
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	FREEZER-TOP 200ml
2 x	Hot wire cutter THERMOCUT 230/E
1 x	TORX-screwdrivers T20
2 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Socket Wrenches 1.5
1 x	Cross-recess Screwdrivers 000
1 x	Microfibre cloth
1 x	Rebating cutter 6.4mm
1 x	Tungsten carbide cutters set
2 x	Core box bit 3.2mm
2 x	Socket Wrenches 3.2
1 x	BGA-Bottom-218
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Slot cutter 5.0mm
1 x	Supercut jig saw blades of special steel
1 x	MICROMOT extension cord. 300cm.
2 x	TIP SPT-4
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Wrench Keys 1.3
1 x	Super-fine sanding discs grain 000
1 x	DIL24/QSOP24 ZIF 150mil
2 x	Socket Wrenches 3.0
1 x	Wrench Keys 2.5
1 x	Crimping plier for BNC
2 x	Rounding over cutter 6.4mm
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Cross-recess Screwdrivers 2
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Diamond blade
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	DIL44/SOIC44 ZIF-CS
1 x	Screwdriver 2.0
1 x	TIP SPT-10
1 x	Inspector mirror
1 x	sanding belts for BBS/s Grit 150
2 x	Bottom PSOP44 NOR-2
1 x	TORX-screwdrivers T7
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 2.5
1 x	Wrench Keys 1.5
1 x	SCMT060204
1 x	Bottom PSOP44 NOR-1
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	IC tweezers
1 x	Threading inserts 60º
2 x	TORX-screwdrivers T10
1 x	PLCC Extractor
1 x	Edge cutter with pin 6.4mm
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Wrench Keys 0.9
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Cross-recess Screwdrivers 0
2 x	V-slot cutter 6.5mm
1 x	Angle cutter 45 °
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Three-jaw steel drill chuck
1 x	Cross-recess Screwdrivers 1
1 x	Insulation Resistance Tester MG500
1 x	DIL44/PLCC44 ZIF
1 x	Screwdriver 1.0
1 x	sandpaper for PS 13 Grot 180
1 x	Top PSOP44 ZIF 600mil
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Cross-recess Screwdrivers 1
1 x	Wrench Keys 2.0
1 x	DIL20/PLCC20 ZIF-CS
1 x	Professional polishing sponge
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	TORX-screwdrivers T8
1 x	TU 2404
2 x	10-piece wood router cutter set
1 x	precision machine vices FMS125
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Socket Wrenches 2.0
1 x	TORX-screwdrivers T9
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Solid carbide saw blade
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Socket Wrenches 5.5
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL16W/SOIC16 ZIF 300mil
2 x	TIP SPT-9
2 x	Socket Wrenches 4.5
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL8/SOIC8 ZIF 150mil
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Socket Wrenches 4.0
1 x	sanding belts for BBS/s Grit 80
2 x	Tungsten tipped saw blade
2 x
1 x	TORX-screwdrivers T4
1 x	TIP SPT-2
1 x	SmartProg2
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 240
1 x	Slot cutter 3.2mm
1 x	Slot cutter 6.5mm
1 x	Crosscut 'Super-Cut' blade
2 x	PLCC Puller
1 x	TORX-screwdrivers T10
2 x	Universal polishing paste
1 x	TORX-screwdrivers T10
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	DIL8/SSOP8 ZIF 120mil
1 x	Flexishaft MICROMOT 110/BF
1 x	Saw blade made of high-alloy special steel
1 x	Cross-recess Screwdrivers 1
1 x	Cross-recess Screwdrivers 2
1 x	TIP SPT-3
1 x	TIP SPT-6
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Protective device for hand-operated MICROMOT
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Half round cutter 13mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6

€13,818.13