€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
2 x	BeeHive208S
3 x	Radius Cutting Attachment, complete with pointed tool
3 x	MICROMOT Mains Adapter NG 2/S
1 x	Steel cups
2 x	Felt polishers
3 x	High quality corundum grinding bits
2 x	HSS drill bits 1.0mm
2 x	sandpaper for PS 13 Grit 240
1 x	Mini side cutters EUROline-Conductive
1 x	BGA-0245/0242
2 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	Chuck for TBM 220
2 x	BGA-Bottom-10
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Four Jaw Chuck
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
3 x	Tungsten Carbide Tipped (TCT)
1 x	Corundum bound cutting disc for LWS
1 x	Corundum sanding discs for LWS
2 x	Diamond Coated
1 x	MICROMOT 50
2 x	Centre Turning Attachment
1 x	BGA-Bottom-126
4 x	Collet Set for accurate use on round components
1 x	Super-Cut
1 x	Step clamps made of steel
1 x	Mini side cutters EUROline-Conductive
1 x	Rebating cutter 6.4mm
1 x	Half round cutter 13mm
1 x	BGA-Bottom-115
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Wood Lathe DB450
2 x	Corundum grinding disc for LWS
2 x	BGA-0246/0243
1 x	Polishing machine PM 100
1 x	EUROline mini side cutter
2 x	Footswitch FS
1 x	Tungsten carbide cutters set
1 x	BGA-Bottom-187
1 x	High quality corundum grinding bits
3 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	BGA-0246/0244
1 x	BGA-Bottom-154
1 x	Sanding Drums
1 x	MICROMOT Mains Adapter NG 2/E
2 x
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Grinding mop cylinder grit 80
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-164
1 x	Professional polishing sponge
1 x	Independent four jaw chuck for the DB 250
1 x	Cotton polishers
1 x	High quality corundum grinding bits
1 x	Three jaw chuck for the lathe DB 250
1 x	High quality corundum grinding bits
1 x	Gear Chuck
1 x	Sanding Discs
1 x	Corundum fan sander for LWS
1 x	HSS twist drill set with centring pin
2 x	10-piece wood router cutter set
1 x	Universal and oil siphoning pump AP 12
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	BGA-Bottom-177
1 x	Fibre-Cut Discs
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 240
3 x	Grinding mop cylinder grit 120
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Corundum sanding discs for LWS
1 x	Aluminium Die-Cast
1 x	Multiform grindstone
1 x	Metal Cutting Blades
1 x	Wolfram vanadium steel milling bits
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-105
2 x	BGA-Bottom-106
1 x	sandpaper for PS 13 Grit 400
1 x	Sanding Drums
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Super-fine sanding discs grain 400
1 x	Cutting disc, with reinforcement
1 x	Diamond-coated cutting disc for MIC
1 x	BGA-Bottom-170
1 x	Diamond Twist Drills
1 x	Slot cutter 6.5mm
1 x	BGA-0245/0241
1 x	sanding belts for BBS/s Grit 240
1 x	Microfibre cloth
1 x	Mill/Drill Unit BFB 2000.
1 x	Fibre-Cut Discs
1 x	Wolfram vanadium steel milling bits
1 x	Fixed Steady
1 x	BGA-Bottom-151
1 x	sandpaper for PS 13 Grot 180
1 x	Fluted filter for CW-matic
1 x	Conjunto de três brocas de ponto
2 x	Replacement glue sticks for HKP 220
1 x	MICROMOT drill stand MB 200
1 x	Blade for Wood and Plastics
1 x	14-piece parallel supports set
1 x	Diamond Cutting Discs
1 x	Jig saw blades made of HSS
1 x	Slot cutter 5.0mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Protective device for hand-operated MICROMOT
1 x	Fibre-Cut Discs
1 x	sanding belts for BBS/s Grit 150
1 x	Milling cutter set (2 - 5mm)
1 x	BGA-Bottom-157
1 x	BGA-Bottom-167
1 x	DIL28/PLCC28 ZIF
1 x	Ball-shaped diamond coated 2.2mm
3 x	Backing disc for LWS
1 x	BGA-Top-3 ZIF-CS
1 x	Bottom PSOP44 NOR-2
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL8/QFN8-1 ZIF-CS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	Super-fine sanding discs grain 2000
1 x	DIL44/SOIC44 ZIF-CS
1 x	Flexible silicon discs
1 x	Fine dust paper filter for CW-matic
1 x	BGA-Bottom-5
1 x	BGA-Bottom-103
1 x	Super-fine sanding discs grain 000
1 x	BGA-Bottom-225
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	BGA-Bottom-223
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Dividing attachment TA 230 for PF 250

€24,753.72