€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	High quality corundum grinding bits
1 x	SCMT060204
2 x	SILICONE 200ml
2 x	Sanding bands 14x13mm
1 x	Wheels brushes
1 x	High quality corundum grinding bits
2 x	TOP-PIN 200ml
1 x	Stainless steel wheels
3 x	Lathe System PD 400
2 x	DCMT070204
1 x	Table Sawr TKS 315 E
2 x	Flexible silicon discs
1 x	Grinding mop cylinder grit 80
2 x	Stainless steel cups
1 x	PVC-insulated tweezers 5-121-6
1 x	Steel cups
2 x	sandpaper for PS 13 Grot 180
2 x	VASELINE 200ml
2 x	Precision quick-action drill chuck 0-13mm B16
3 x	RT100 - Horizontal-vertical circular dividing table
1 x	SPRAYFLON 200ml
1 x	TCMT090204
2 x	sandpaper for PS 13 Grit 400
1 x	Angle cutter 45 °
1 x	sandpaper for PS 13 Grit 240
1 x	Grinding mop cylinder grit 120
1 x	PVC-insulated tweezers 5-107-6
1 x	Special Fused Alumina (Hardness N).
2 x	Blade holders for DS 460
1 x	Compact workshop vacuum cleaner CW-matic
2 x	sanding belts for BBS/s Grit 150
1 x	Sanding bands 14x13mm
2 x	Flexible polishing pad set
2 x	SPRAYOIL 200ml
3 x	Morse taper MT3 - B16
2 x	RT200 - Horizontal-vertical circular dividing table
3 x	Precision lathe PD 250/E
1 x	IT 200 - Indirect dividing attachment
2 x	PROTECTION 200ml
1 x	Broca de alta duração de 1.3mm
3 x	CM2 - B16 - M10
1 x	IT 150 - Indirect dividing attachment
1 x	TCMT110204
1 x	Grinding mop cylinder grit 120
2 x	Fine dust paper filter for CW-matic
1 x	Broca de alta duração de 1.5mm
2 x	MULTI 200ml
2 x	RT150 - Horizontal-vertical circular dividing table
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	sanding belts for BBS/s Grit 80
1 x	Felt polishers
1 x	Cups brushes
3 x	Precision quick-action drill chuck 0-10mm B16
1 x	Cotton polishers
1 x	Stainless steel brushes
2 x	Silicon-Carbide.
1 x	Steel brushes
1 x	Brass brushes
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
2 x	Polishing Set
2 x	Fluted filter for CW-matic
1 x	High quality corundum grinding bits
1 x	SCMT09T304
3 x	Band knife of hardened spring band steel (without teeth)
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Tungsten Carbide Tipped (TCT)
1 x	Grinding mop cylinder grit 240
1 x	Felt polishers
1 x	WCMT050308
1 x	PROLUB 200ml
1 x	Flexible silicon discs
1 x	lathe tools 12mm
1 x	Revolving center with replacement lathe centers
2 x	DCGT 070202F-AL
1 x	TU 1503V
1 x	Blade for Wood and Plastics
1 x	MICRO Heat gun MH 550
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Morse taper MT2 - B16
1 x	Slot cutter 6.5mm
1 x	Slot cutter 5.0mm
1 x	Router base OFV
1 x	Rebating cutter 6.4mm
1 x	Blade for Steel and brass
3 x	Broca de alta duração de 2.0mm
1 x	TIP SPT-4
2 x	Footswitch FS
2 x	Step clamps made of steel
2 x	Insert CCGT060202-AK
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	MICROMOT steel collet set
1 x	Floor cover ESD
1 x	Combination pliers 190mm
1 x	Sanding pads for OZI 220/E grit 150
1 x	precision machine vices FMS150
1 x	Rounding over cutter 6.4mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Tungsten carbide cutters set
1 x	Backing disc for LWS
1 x	OPTI BF16 Vario
1 x	Solid carbide saw blade
1 x	Professional set for finish grinding and polishing
1 x	OPTI BF20 VARIO
1 x	HSS immersion saw blades for OZI
1 x	Insert LGTN-2
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Supercut jig saw blades of special steel
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICROMOT tool holder
1 x	BGA-Top-4 ZIF-CS
1 x	FLUX DISPENSING PEN, LEAD FREE
1 x	Aluminium Die-Cast
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Blade guides separately
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	MICROMOT 230/E
1 x	Super-fine sanding discs grain 400
1 x	Complete Engraving Kit with trial glass
1 x	Microfibre cloth
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Professional polishing sponge
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cutting disc, with reinforcement
1 x	V-slot cutter 6.5mm
1 x	MICRO-screwdrivers
1 x	EUROline side cutter pointed head
1 x	TU 2404
1 x	Component tweezers 5-009
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Spare cutting wire
1 x	Three-jaw steel drill chuck
1 x	Vacum SAA 901
1 x	Replacement glue sticks for HKP 220
1 x	MICROFLAME burner MFB/E
1 x	Diamond blade for MBS 240/E
1 x	Combi cutter 6.5/2.5mm
1 x	MICROFLAM gas soldering set MGS
1 x	Three jaw chuck for the lathe DB 250
1 x	10-piece wood router cutter set
1 x	Component tweezers 5-013
1 x	Crosscut 'Super-Cut' blade
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Core box bit 3.2mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Five piece HSS chisel set
1 x	Safety Insulated Pozidriv Screwdriver 14-643VDE
1 x	Tungsten tipped saw blade
1 x	centrically clamping 100mm
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Lambswool polishing disc
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Broca de alta duração de 1.0mm
1 x	Mill/Drill Unit BFB 2000.

€22,600.17