€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Mini side cutters EUROline-Conductive
3 x	Snipe nose pliers 45º EUROline-Conductive
2 x	End side cutters EUROline-Conductive
2 x	Round nose pliers 45º EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	HSS drill bits 0.5mm
1 x	Titan Tweezers 5-036
2 x	Cutting tool 10 mm
1 x	lathe tools 12mm
2 x	End side cutters 45º EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	Mini side cutters EUROline-Conductive
1 x	Titan Tweezers 5-031
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Titan Tweezers 5-037
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Broca de alta duração de 0.9mm
1 x	Titan Tweezers 5-035
1 x	Protective device for hand-operated MICROMOT
1 x	Antiallergical Tweezers 5-117-1
2 x	High quality corundum grinding bits
1 x	Tungsten carbide drills Ø2mm
1 x	Fine dust paper filter for CW-matic
1 x	Super-fine sanding discs grain 2000
1 x	MICROMOT drill stand MB 200
1 x	Five piece HSS chisel set
1 x	V-slot cutter 6.5mm
1 x	Replacement glue sticks for HKP 220
1 x	Diamond Grinding Bits 1,8mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	Flexible silicon discs
1 x	Super-Cut
1 x	Fibre-Cut Discs
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Sanding fleece for LWS
2 x	Felt polishers
2 x	High quality corundum grinding bits
1 x	Tungsten carbide cutter 3.0mm
1 x	SmartProg2
1 x	Diamond cutting blade for OZI
3 x	Fibre-Cut Discs
2 x	Table Sawr TKS 315 E
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 2.0mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	HSS cutting blade for OZI
2 x	Felt polishers
1 x	Corundum grinding disc for LWS
2 x	Dividing attachment TA 230 for PF 250
1 x	Replacement belts for BSL 220/E
1 x	surface planing and thicknessing ADH 200
1 x	Fibre-Cut Discs
2 x	PVC-insulated tweezers 5-107-6
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	6-piece screwdriver and cross-recess set
2 x	Cutting disc, with reinforcement
2 x	Flap Wheels
1 x	Fibre-Cut Discs
2 x	Universal and oil siphoning pump AP 12
1 x	Steel brushes
1 x	Cutting tool HM 20 mm
1 x	Table Saw TKS 2500 SC
2 x	Fibre-Cut Discs
2 x	High quality corundum grinding bits
1 x	Super-fine sanding discs grain 400
1 x	Sanding Discs
1 x	Tool holder for rotary tools
1 x	High quality corundum grinding bits
1 x	Flexible silicon discs
3 x	Vacum SAA 901
1 x	Milling cutter set (2 - 5mm)
1 x	High quality corundum grinding bits
1 x	Lathe tools 10mm pastilhados
1 x	lathe tools 8mm
1 x	Flexible polishing pad set
1 x	Router base OFV
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Three-jaw steel drill chuck
1 x	Replacement carving blades for MSG
1 x	Three jaw chuck for the lathe DB 250
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	HSS twist drill set with centring pin
1 x	Centre Turning Attachment
1 x	Broca de alta duração de 3.0mm
2 x	surface planing and thicknessing ADH 250
1 x	Multiform grindstone
1 x	Chuck for TBM 220
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Belt sander BS/E
1 x	Telephone pliers stright 165mm
1 x	Fixed Steady
1 x	Mill/Drill Unit BFB 2000.
1 x	Precision steel vice PM 40
1 x	14-piece parallel supports set
1 x	Sanding bands 14x13mm
1 x	Belt sander BBS/S
1 x	EUROline side cutter pointed head
1 x	Cutter head for copy and surface milling MT3
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICRO Miller FF 230
1 x	Combination pliers 170mm
1 x	HSS drill bits 1.2mm
1 x	Nylon Fleece Brushes
1 x	Angle cutter 45 °
1 x	Insulation Resistance Tester MG125
1 x	Round nose pliers 185mm
1 x	Backing disc for LWS
1 x	Wood Lathe DB900
1 x	HSS drill bits 1.0mm
1 x	Telephone pliers bent 205mm
1 x	PVC-insulated tweezers 5-121-6
1 x	Step clamps made of steel
1 x	Collet Set for accurate use on round components

€12,396.46