€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Five piece HSS chisel set
1 x	Chuck for TBM 220
1 x	Blade for Wood and Plastics
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Fluted filter for CW-matic
3 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 80
1 x	Cylinder shaped milling cutters
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Professional polishing sponge
3 x	Multiform grindstone
1 x	Edge cutter with pin 6.4mm
1 x	HSS boring tool set, 6 pieces
2 x	10-piece wood router cutter set
2 x	Jig saw blades made of HSS
2 x	Core box bit 3.2mm
1 x	Fibre-Cut Discs
1 x	MICROMOT extension cord. 300cm.
1 x	Band knife of hardened spring band steel (without teeth)
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Sanding pads for OZI 220/E grit 150
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x
1 x	Polishing felt, medium hard
2 x	Corundum grinding disc for LWS
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Supercut jig saw blades of special steel
1 x	Professional set for finish grinding and polishing
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Fibre-Cut Discs
1 x	Spare cutting wire
1 x	Cylinder sander WAS/E
1 x	Milling cutter set (6 - 10mm)
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	HSS immersion saw blades for OZI
1 x	Tungsten carbide cutters set
1 x	Blade guides separately
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Universal polishing paste
2 x	Micro Compound Table KT 70
1 x	Cotton polishers
2 x	Replacement glue sticks for HKP 220
2 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Corundum sanding discs for LWS
1 x	HSS twist drill set to DIN 338
1 x	Flexible silicon discs
1 x	Protective device for hand-operated MICROMOT
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	High quality corundum grinding bits
2 x	Sanding fleece for LWS
1 x	Combi cutter 6.5/2.5mm
1 x	Cutting disc, with reinforcement
1 x	Independent four jaw chuck for the DB 250
3 x	Diamond cutting blade for OZI
1 x	Corundum sanding discs for LWS
1 x	Three jaw chuck for the lathe DB 250
1 x	Fibre-Cut Discs
1 x	Fine dust paper filter for CW-matic
1 x	Diamond blade
1 x	MICROMOT tool holder
1 x	MICROMOT drill stand MB 200
1 x	Flexible silicon discs
1 x	MICROMOT steel collet set
2 x	Footswitch FS
1 x	Slot cutter 6.5mm
1 x	Microfibre cloth
1 x	High quality corundum grinding bits
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
3 x	Replacement belts for BSL 220/E
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Flexible polishing pad set
1 x	Corundum fan sander for LWS
2 x	Corundum fan sander for LWS
1 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Tungstein carbide rasp - and cutting disc
1 x	Sanding Drums
1 x	Tungsten Carbide Tipped (TCT)
1 x	Slot cutter 3.2mm
2 x	Mill/Drill Unit BFB 2000.
1 x	Four Jaw Chuck
2 x	Sanding pads for OZI 220/E grit 240
1 x	Three-jaw steel drill chuck
1 x	Blade for Steel and brass
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Tool holder for rotary tools
1 x	Aluminium Die-Cast
1 x	HSS immersion saw blades for OZI
1 x	Super-fine sanding discs grain 400
1 x	Sanding fleece for LWS
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Fibre-Cut Discs
1 x	Milling cutter set (2 - 5mm)
1 x	Corundum grinding disc for LWS
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Replacement belts for BSL 220/E
1 x	HSS twist drill set with centring pin
1 x	14-piece parallel supports set
1 x	Dividing attachment TA 230 for PF 250
1 x	Rebating cutter 6.4mm
1 x	Sanding Discs
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	Backing disc for LWS

€3,026.23