€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Felt cloth polishing disc (100 x 15mm)
1 x	3-jaw chuck centrically clamping 100mm
1 x	Slot cutter 5.0mm
1 x	Slot cutter 6.5mm
1 x	HSS immersion saw blades for OZI
1 x	Fibre-Cut Discs
1 x	Flexible silicon discs
1 x	Fixed Steady
1 x	3-jaw chuck centrically clamping 160mm
1 x	Broca de alta duração de 2.3mm
1 x	Wood Lathe DB450
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Diamond cutting blade for OZI
1 x	HSS cutting blade for OZI
1 x	Cylindrical cutters
1 x	Turning inserts SCMT09T304
1 x	precision machine vices FMS200
1 x	Dial gauge
1 x	HSS drill bits 1.2mm
1 x	Bench drill press TBH
1 x	TCMT110204
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	Morse taper MT3 - B16
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Diamond Grinding Bits 1,8mm
1 x	precision machine vices FMS125
1 x	Fluted filter for CW-matic
1 x	Solid carbide saw blade
1 x	V-slot cutter 6.5mm
1 x	Cutting tool 8 mm
2 x	4-jaw chuck individually clamping 100mm
1 x	TCMT090204
1 x	MICROMOT drill stand MB 200
1 x
1 x	RT200 - Horizontal-vertical circular dividing table
2 x	3-jaw chuck centrically clamping 80mm
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	Grinding mop cylinder grit 80
1 x	4-jaw chuck individually clamping 125mm
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	End milling cutter kit HSS 12 pcs
1 x	Step clamps made of steel
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	Cutting tool 16 mm
2 x	Footswitch FS
1 x	Fibre-Cut Discs
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Cutter head for copy and surface milling MT3
2 x	centrically clamping 100mm
1 x	Table Saw TKS 2500 SC
1 x	Edge cutter with pin 6.4mm
1 x	Super-fine sanding discs grain 000
1 x	High quality corundum grinding bits
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	3-jaw chuck centrically clamping 125mm
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Engraving tool GG
1 x	Corundum bound cutting disc for LWS
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/TQFP100 ZIF PLD-2
2 x	Half round cutter 13mm
1 x	Grinding and Polishing Machine SP/E

€7,701.20