€23.99 + VAT

Pensander PS 13
[28594]

Ideal for working on surfaces in recesses, slots and small corners.

Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.

Technical data:
Direct voltage 12 - 18V. 8,000 linear strokes/min. (2.5mm stroke length). Length 160mm. Weight 130g.

Reviews

Customers who bought this product also purchased

Jig saw blades made of HSS	Replacement cutting disc for MICRO cutter MIC	Diamond-coated cutting disc for MIC
Supercut jig saw blades of special steel	Angle polisher WP/E	Sanding Discs

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cutting tool 16 mm
1 x	Silicon-Carbide.
1 x	Morse taper MT2 - B16
1 x	quantum revolving center CM2
1 x	Professional set for finish grinding and polishing
1 x	lathe tools 10mm
1 x	DCMT070204
1 x	TCMT090204
2 x	Compact workshop vacuum cleaner CW-matic
1 x	HSS immersion saw blades for OZI
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Mill/Drill Unit BFB 2000.
2 x	Independent four jaw chuck for the DB 250
2 x	Micro Compound Table KT 70
1 x	Replacement glue sticks for HKP 220
1 x	Disc Sander TG 250/E
1 x	Engraving tool GG
1 x	Wood Lathe DB900
1 x	HSS immersion saw blades for OZI
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Half round cutter 13mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cotton polishers
1 x	Corundum fan sander for LWS
1 x	surface planing and thicknessing ADH 250
2 x	Four Jaw Chuck
1 x	Corundum sanding discs for LWS
2 x	Crosscut 'Super-Cut' blade
1 x	Diamond Cutting Discs
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
2 x	Diamond Coated
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Blade holders for DS 460
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Aluminium Die-Cast
2 x	Spare cutting wire
2 x	Footswitch FS
1 x	Disc Sander TG 125/E
1 x	Universal and oil siphoning pump AP 12
1 x	Cut off/mitre saw KGS 80
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Grinding mop cylinder grit 120
1 x	MICROMOT steel collet set
2 x	Diamond cutting blade for OZI
1 x	Diamond-coated cutting disc for MIC
3 x	Centre Turning Attachment
2 x	Collet Set for accurate use on round components
1 x	Grinding mop cylinder grit 240
1 x	sandpaper for PS 13 Grot 180
1 x	14-piece parallel supports set
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Cylinder sander WAS/E
1 x	Diamond Cutting Discs
1 x	Chuck for TBM 220
1 x	Machine Vice MS 4
1 x	Angle cutter 45 °
1 x	Replacement belts for BSL 220/E
1 x	Delta sander OZI/E
1 x	Core box bit 3.2mm
1 x	Pensander PS 13
1 x	MICROMOT drill stand MB 200
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Diamond blade
1 x	Super-Cut
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Tungsten tipped saw blade
1 x	sanding belts for BBS/s Grit 80
1 x	Conjunto de três brocas de ponto
1 x	sandpaper for PS 13 Grit 240
1 x	Sanding pads for OZI 220/E grit 80
1 x	Cutting disc, with reinforcement
1 x	Tungsten carbide cutters set
1 x	Diamond Grinding Bits 1,8mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Tool holder for rotary tools
1 x	Diamond Cutting Discs
1 x	Tungsten Carbide Tipped (TCT)
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/BF
1 x	V-slot cutter 6.5mm

€5,585.68

Quick Find

We Accept

Manufacturer Info


-	PROXXON Homepage
-	Other products

What's New?

Grinding mop cylinder grit 120
€8.33

Languages

Share Product

€23.99 + VAT

Pensander PS 13[28594]

Pensander PS 13
[28594]