€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cutting tool 16 mm
1 x	Silicon-Carbide.
1 x	Morse taper MT2 - B16
1 x	quantum revolving center CM2
1 x	Professional set for finish grinding and polishing
1 x	lathe tools 10mm
1 x	DCMT070204
1 x	TCMT090204
2 x	Compact workshop vacuum cleaner CW-matic
1 x	HSS immersion saw blades for OZI
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Mill/Drill Unit BFB 2000.
2 x	Independent four jaw chuck for the DB 250
2 x	Micro Compound Table KT 70
1 x	Replacement glue sticks for HKP 220
1 x	Disc Sander TG 250/E
1 x	Engraving tool GG
1 x	Wood Lathe DB900
1 x	HSS immersion saw blades for OZI
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Half round cutter 13mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cotton polishers
1 x	Corundum fan sander for LWS
1 x	surface planing and thicknessing ADH 250
2 x	Four Jaw Chuck
1 x	Corundum sanding discs for LWS
2 x	Crosscut 'Super-Cut' blade
1 x	Diamond Cutting Discs
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
2 x	Diamond Coated
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Blade holders for DS 460
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Aluminium Die-Cast
2 x	Spare cutting wire
2 x	Footswitch FS
1 x	Disc Sander TG 125/E
1 x	Universal and oil siphoning pump AP 12
1 x	Cut off/mitre saw KGS 80
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Grinding mop cylinder grit 120
1 x	MICROMOT steel collet set
2 x	Diamond cutting blade for OZI
1 x	Diamond-coated cutting disc for MIC
3 x	Centre Turning Attachment
2 x	Collet Set for accurate use on round components
1 x	Grinding mop cylinder grit 240
1 x	sandpaper for PS 13 Grot 180
1 x	14-piece parallel supports set
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Cylinder sander WAS/E
1 x	Diamond Cutting Discs
1 x	Chuck for TBM 220
1 x	Machine Vice MS 4
1 x	Angle cutter 45 °
1 x	Replacement belts for BSL 220/E
1 x	Delta sander OZI/E
1 x	Core box bit 3.2mm
1 x	Pensander PS 13
1 x	MICROMOT drill stand MB 200
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Diamond blade
1 x	Super-Cut
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Tungsten tipped saw blade
1 x	sanding belts for BBS/s Grit 80
1 x	Conjunto de três brocas de ponto
1 x	sandpaper for PS 13 Grit 240
1 x	Sanding pads for OZI 220/E grit 80
1 x	Cutting disc, with reinforcement
1 x	Tungsten carbide cutters set
1 x	Diamond Grinding Bits 1,8mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Tool holder for rotary tools
1 x	Diamond Cutting Discs
1 x	Tungsten Carbide Tipped (TCT)
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/BF
1 x	V-slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Sanding pads for OZI 220/E grit 240

€5,597.44