€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Rebating cutter 6.4mm
3 x	Three jaw chuck for the lathe DB 250
3 x	V-slot cutter 6.5mm
2 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	Grinding mop cylinder grit 120
1 x	Hand Magnifier 2-293
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Hand magnifier with LED light 3X
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x	Flexible polishing pad set
4 x	Cylinder shaped milling cutters
3 x	Collet Set for accurate use on round components
1 x	Sanding Drums
1 x	Corundum fan sander for LWS
1 x	Felt polishers
3 x	Flame shaped milling cutters
3 x	Disc cutters
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	sandpaper for PS 13 Grit 240
1 x	quantum revolving center CM1
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	MICRO Miller FF 230
2 x	Five piece HSS chisel set
3 x	Solid carbide stylus for engraving
3 x	Flexible silicon discs
1 x	Sanding pads for OZI 220/E grit 240
1 x	MICROFLAM gas soldering set MGS
2 x	High quality corundum grinding bits
1 x	Revolving center with replacement lathe centers
1 x	Sanding Drums
2 x	High quality corundum grinding bits
2 x	Coarse-toothed (10 TPI per 25mm)
2 x	Tool holder for rotary tools
5 x	Screwdriver bit set. 49-piece.
2 x	Mill/Drill Unit BFB 2000.
2 x	Mill/Drill System BFW 40/E
1 x	sandpaper for PS 13 Grot 180
2 x	Sanding pads for OZI 220/E grit 150
1 x	High quality corundum grinding bits
2 x	Dividing attachment TA 230 for PF 250
5 x	Lathe System PD 400
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	High quality corundum grinding bits
2 x	Solid carbide stylus for engraving
1 x	Steel brushes
1 x	Sanding bands 14x13mm
2 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
3 x	High quality corundum grinding bits
3 x	Cutting tools of high quality cobalt HSS steel, ground
4 x	Cylindrical cutters
2 x	Polishing paste
1 x	Footswitch FS
2 x	Special Fused Alumina (Hardness N).
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	14-piece parallel supports set
3 x	Three piece thread cutting set
2 x	MICRO-screwdrivers
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Flap Wheels
4 x	Step clamps made of steel
1 x	Grinding mop cylinder grit 240
1 x	Sanding Drums
1 x	HSS immersion saw blades for OZI
2 x	Cut off/mitre saw KGS 80
4 x	Super safety and specialty bit set, 75-piece
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Grinding mop cylinder grit 120
1 x	Steel wheels
4 x	Wolfram vanadium steel milling bits
2 x	Multipurpose Vices Primus 75
3 x	Complete Engraving Kit with trial glass
4 x	Tungsten carbide cutters set
5 x	Compact workshop vacuum cleaner CW-matic
2 x	Flexible polishing pad set
1 x	Flexishaft MICROMOT 110/BF
2 x	Cutting disc, with reinforcement
1 x	Boring Bar for CCMT 8mm
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Flexible silicon discs
4 x	Precision lathe PD 250/E
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Multipurpose Vices Primus100
1 x	Crosscut 'Super-Cut' blade
1 x	SCLCR1010E06
2 x	Stainless steel cups
2 x	Gear Chuck
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Polishing Set
1 x	Sanding Drums
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	Set of special steel cutters
1 x	Flexishaft MICROMOT 110/P
1 x	sclcr2525M12
2 x	Corundum grinding disc for LWS
2 x	Sanding pads for OZI 220/E grit 80
2 x	Felt polishers
2 x	HSS immersion saw blades for OZI
4 x	Cotton polishers
3 x	Nylon Fleece Brushes
2 x	Aluminium Die-Cast
2 x	Fluted filter for CW-matic
2 x	Steel cups
3 x	Flap Wheels
3 x	Four Jaw Chuck
2 x	Cotton polishers
2 x	MICROMOT glue gun HKP 220
4 x	Centre Turning Attachment
3 x	Cups brushes
1 x	Diamond cutting blade for OZI
2 x	Half round cutter 13mm
3 x	Ball shaped milling cutters
2 x	Stainless steel wheels
1 x	Insulation Resistance Tester MG500
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Insulation Resistance Tester MG125
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Felt polishers
1 x	sandpaper for PS 13 Grit 400
1 x	Diamond-coated cutting disc for MIC
2 x	Cone shaped milling cutter
2 x	Tungsten carbide cutter 1.0mm
3 x	High quality corundum grinding bits
2 x	Stainless steel brushes
1 x	Boring Bar for CCMT 16mm
1 x	Sanding Discs
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
3 x	High quality corundum grinding bits
3 x	Engraving tool GG
4 x	Router base OFV
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Corundum bound cutting disc for LWS
2 x	Blade holders for DS 460
1 x	Tungsten carbide cutter 3.0mm
2 x	Wheels brushes
3 x	Cotton polishers
2 x	Felt polishers
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Fixed Steady
1 x	Boring Bar for CCMT
1 x	Independent four jaw chuck for the DB 250
2 x	MICROFLAME burner MFB/E
1 x	Parting tool 10mm
1 x	HSS cutting blade for OZI
1 x	Milling cutter set (6 - 10mm)
1 x	Boring Bar for DCMT 10mm
1 x	Sanding Discs
2 x	Corundum grinding disc for LWS
6 x	Universal and oil siphoning pump AP 12
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Magnetic base
1 x	Precision quick-action drill chuck 0-13mm B16
2 x	Brass brushes
2 x	Tungsten carbide drills Ø1mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Steady rest for D250X550
3 x	MICRO Heat gun MH 550
1 x	Core box bit 3.2mm
2 x	HSS boring tool set, 6 pieces
2 x	EUROline set of pliers
3 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Precision caliper 500mm
1 x	MICRO Miller MF 70
3 x	Universal polishing paste
1 x	Collet chuck ER32 for D250X550
1 x	Blade guides separately
2 x	Diamond Twist Drills
1 x	Ball-shaped diamond coated 2.2mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	High quality corundum grinding bits
2 x	EUROline side cutter rounded head
2 x	EUROline end cutter
2 x	Three-jaw steel drill chuck
1 x	4-jaw chuck individually clamping 125mm
1 x	Quick-action tool holder kit SWH AA
1 x	machine base with shelves for D250X550
1 x	EUROline round nose pliers
1 x	Cutting tool 10 mm
1 x	Edge cutter with pin 6.4mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Hot wire cutter THERMOCUT 650
1 x	Diamond Grinding Bits 5mm
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	EUROline mini side cutter
1 x	Replacement carving blades for MSG
1 x	Micro Compound Table KT 70
1 x	HSS drill bits 0.5mm
1 x	Wolfram vanadium steel milling bits
1 x	HSS drill bits 1.2mm
1 x	Lever Dial Indicator
2 x	EUROline mini side cutter
1 x	EUROline side cutter pointed head
1 x	Fibre-Cut Discs
2 x	Universal holder UHZ
1 x	Tungsten carbide cutter 2.0mm
2 x	Digital caliper gauge 300 mm
1 x	Follow rest for D250X550
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	EUROline mini side cutter
1 x	Tungsten Carbide Tipped (TCT)
1 x	HSS drill bits 0.8mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Morse taper MT2 - B16
1 x	lathe tools 10mm
2 x	Combi cutter 6.5/2.5mm
2 x	Lathe tools 10mm pastilhados
1 x	Tool holder type D for SWH 1-A
1 x	Metal Cutting Blades
1 x	Crimping plier for BNC
1 x	HSS twist drill set with centring pin
1 x	Milling cutter set (2 - 5mm)
1 x	Precision steel vice PM 40
1 x	EUROline snipe nose pliers
3 x
1 x	MICRO Band Saw MBS 240/E
1 x	Silicon-Carbide.
1 x	Blade for Wood and Plastics
2 x	EUROline flat nose pliers
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Chuck for TBM 220
1 x	Slot cutter 3.2mm
1 x	centrically clamping 125mm
1 x	Precision caliper square
1 x	Precision magnetic gauge stand
1 x	Pensander PS 13
1 x	Fibre-Cut Discs
2 x	EUROline top cutter
1 x	Fibre-Cut Discs
1 x	Steel tape measure
1 x	HSS drill bits 1.6mm
1 x	Tungsten carbide drills Ø2mm
1 x	Replacement belts for BSL 220/E

€29,784.19