€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	HSS boring tool set, 6 pieces
2 x	Cylinder sander WAS/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Diamond Grinding Bits 1,8mm
1 x	Blade holders for DS 460
3 x	MICRO-screwdrivers
1 x	Replacement belts for BSL 220/E
2 x	Surface planer AH 80
2 x	Corundum bound cutting disc for LWS
1 x	Quick-action tool holder kit SWH AA
1 x	2-speed scroll saw DSH
1 x	Flexible silicon discs
1 x	MICRO Heat gun MH 550
1 x	Corundum fan sander for LWS
1 x	Lambswool polishing disc
2 x	Collet chuck ER25 for D250X550
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	MICROMOT tool holder
2 x	Felt polishers
2 x	Microfibre cloth
1 x	10-piece wood router cutter set
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Felt polishers
1 x	MICRO Miller MF 70
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROMOT 230/E
1 x	Tool holder type H for SWH 1-A
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
3 x	Lathe System PD 400
1 x	Tungsten Carbide Tipped (TCT)
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Corundum grinding disc for LWS
1 x	Precision quick-action drill chuck 0-16mm B16
2 x	Milling cutter set (6 - 10mm)
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	TU 2004V
1 x	Cups brushes
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Cotton polishers
1 x	Diamond Cutting Discs
1 x	Screwdriver bit set. 49-piece.
1 x	Step clamps made of steel
2 x	Disc Sander TG 125/E
2 x	Corundum sanding discs for LWS
1 x	Blade guides separately
1 x	Bench drill press TBH
1 x	MICROFLAM gas soldering set MGS
2 x	Super-fine sanding discs grain 400
1 x	Disc Sander TG 250/E
1 x	V-slot cutter 6.5mm
1 x	Mill/Drill System BFW 40/E
1 x	Collet Set for accurate use on round components
3 x	Independent four jaw chuck for the DB 250
1 x	Grinding and Polishing Machine SP/E
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Cotton polishers
2 x	Corundum grinding disc for LWS
1 x	quantum revolving center CM2
2 x	14-piece parallel supports set
2 x	Four Jaw Chuck
1 x	Lathe chuck flange for D250X550
2 x	Flexible silicon discs
2 x	Precision quick-action drill chuck 0-10mm B16
1 x	Backing disc for LWS
1 x	Diamond Grinding Bits 5mm
1 x	Edge cutter with pin 6.4mm
1 x	Fibre-Cut Discs
1 x	Corundum sanding discs for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
3 x	Precision lathe PD 250/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Blade for Wood and Plastics
1 x	Multipurpose Vices Primus100
2 x	Three jaw chuck for the lathe DB 250
2 x	MICROMOT Mains Adapter NG 2/E
1 x	HSS twist drill set to DIN 338
1 x	Footswitch FS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cylinder shaped milling cutters
1 x	Fixed Steady
1 x	Belt sander BS/E
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cutting tool 10 mm
1 x	Fibre-Cut Discs
1 x	Slot cutter 5.0mm
1 x	High quality corundum grinding bits
1 x	Band knife of hardened spring band steel (without teeth)
3 x	Flap Wheels
1 x	4-jaw chuck individually clamping 125mm
1 x	Hot wire cutter THERMOCUT 650
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding fleece for LWS
2 x	Super-fine sanding discs grain 000
1 x	Flexible polishing pad set
2 x	Fibre-Cut Discs
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	MICROMOT drill stand MB 200
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	sanding belts for BBS/s Grit 80
1 x	Super-fine sanding discs grain 2000
1 x	Bench drill machine TBM 220
1 x	MICRO shaper MP 400
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Rounding over cutter 6.4mm
1 x	TU 2404
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	sandpaper for PS 13 Grot 180
1 x	Sanding bands 14x13mm
1 x	Cylindrical cutters
2 x	Aluminium Die-Cast
1 x	HSS twist drill set with centring pin
1 x	MICROMOT steel collet set
1 x	Protective device for hand-operated MICROMOT
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Replacement carving blades for MSG
1 x	Diamond blade for MBS 240/E
1 x	Cutting disc, with reinforcement
1 x	3-jaw chuck centrically clamping 125mm
1 x	Machine Vice MS 4
1 x	Steel brushes
1 x	Micro Compound Table KT 70
1 x	Wheels brushes
1 x	Diamond cutting blade for OZI
1 x	Diamond Grinding Bits 1,8mm
1 x	Flexible silicon discs
1 x	Universal and oil siphoning pump AP 12
1 x	MICROMOT 50/E
1 x	Brass brushes
1 x	HSS cutting blade for OZI
1 x	Replacement belts for BSL 220/E
1 x	Diamond Coated
1 x	Table Saw FET

€20,013.61