€23.99 + VAT

Pensander PS 13
[28594]

Ideal for working on surfaces in recesses, slots and small corners.

Linear (not rotating) stroke. Long-lasting special DC motor. Housing of glass-fibre reinforced POLYAMIDE. Four sanding arbors with straight shanks and four angled (all different shapes) as well as three sheets of pre-profiled self-adhesive sanding pads are included. The sheets are of grits 180, 240 and 400 with 5 of each shape per sheet.

Technical data:
Direct voltage 12 - 18V. 8,000 linear strokes/min. (2.5mm stroke length). Length 160mm. Weight 130g.

Reviews

Customers who bought this product also purchased

Supercut jig saw blades of special steel	Jig saw blades made of HSS	Replacement cutting disc for MICRO cutter MIC
Diamond-coated cutting disc for MIC	Angle polisher WP/E	Sanding Discs

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Five piece HSS chisel set
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Glass fibre contact cleaner brush
1 x	Cotton polishers
1 x	Inpection mirror 1-978
1 x	Lambswool polishing disc
1 x	Sanding Drums
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	sandpaper for PS 13 Grit 400
1 x	Special Fused Alumina (Hardness N).
1 x	Fibre-Cut Discs
1 x	Super-fine sanding discs grain 2000
1 x	Super-Cut
1 x	Flexishaft MICROMOT 110/P
1 x	sanding belts for BBS/s Grit 150
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Centre Turning Attachment
1 x	Micro Compound Table KT 70
1 x	Diamond-coated cutting and roughing disc
1 x	ESD Tweezers 5-193
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Broca de alta duração de 3.0mm
1 x	Disc Sander TG 125/E
1 x	6-piece TORX-screwdriver-set
1 x	Broca de alta duração de 2.1mm
1 x	Cylinder shaped milling cutters
1 x	Contact bracelet with spiral cord
1 x	Fibre-Cut Discs
1 x	Replacement carving blades for MSG
1 x	Tungsten carbide cutters set
1 x	Independent four jaw chuck for the DB 250
1 x	6-piece screwdriver and cross-recess set
1 x	Disc Sander TG 250/E
1 x	Floor cover ESD
1 x	Gear Chuck
1 x	Spiral blade. 125mm long with plain ends (without pins).

€1,455.93