€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Chuck for TBM 220
1 x	Three jaw chuck for the lathe DB 250
1 x	Broca de alta duração de 1.5mm
1 x	MICRO-screwdrivers
1 x	HSS twist drill set with centring pin
1 x	Router base OFV
1 x	Broca de alta duração de 1.1mm
1 x	Flexible polishing pad set
2 x	Fibre-Cut Discs
1 x	BeeProg2
2 x	Hot wire cutter THERMOCUT 12/E
1 x	TU 1503V
1 x	Cups brushes
1 x	Backing disc for LWS
2 x	HSS boring tool set, 6 pieces
1 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Broca de alta duração de 0.7mm
2 x	Broca de alta duração de 2.1mm
2 x	Precision lathe PD 250/E
1 x	Hand Magnifier 2-293
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x	Precision steel vice PM 40
1 x	ESD-handling ser 9-361
1 x	Fibre-Cut Discs
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Broca de alta duração de 0.8mm
1 x	Machine Vice MS 4
1 x	Half round cutter 13mm
1 x	Universal and oil siphoning pump AP 12
1 x	Broca de alta duração de 2.2mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Tungsten Carbide Tipped (TCT)
1 x	Multipurpose Vices Primus100
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Broca de alta duração de 1.2mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	6-piece screwdriver and cross-recess set
1 x	Hot wire cutter THERMOCUT 650
1 x	Conjunto de três brocas de ponto
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Four Jaw Chuck
2 x	High quality corundum grinding bits
1 x	Broca de alta duração de 1.4mm
1 x	TIP SPT-6
1 x	Grinding mop cylinder grit 120
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Thicknesser DH 40
1 x	Plastic magnifying glass
1 x	Precision Vice FMZ
1 x	Broca de alta duração de 2.9mm
1 x	6-piece screwdriver and cross-recess set
1 x	PLCC Extractor
1 x	Rebating cutter 6.4mm
1 x	Combi cutter 6.5/2.5mm
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Warding files set, 6pcs
1 x	Safety insulated screwdrivers 14-606 VDE
1 x	Diamond Cutting Discs
1 x	MICRO Heat gun MH 550
1 x	Diamond Twist Drills
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Flexishaft MICROMOT 110/BF
1 x	Combination pliers 210mm
1 x	Corundum fan sander for LWS
1 x	Motor-driven carving device MSG
1 x	Compact workshop vacuum cleaner CW-matic
1 x	High quality corundum grinding bits
1 x	Corundum bound cutting disc for LWS
1 x	Broca de alta duração de 3.0mm
1 x	Fibre-Cut Discs
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Insulation Resistance Tester MG125
1 x	Cutter head for copy and surface milling MT3
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Broca de ponto 6.30 x 2.50
1 x	Slot cutter 6.5mm
1 x	Fibre-Cut Discs
1 x	Multipurpose Vices Primus 75
1 x	Gear Chuck

€7,509.97