Three jaw chuck for the lathe DB 250, Oficina-digital.com

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Wolfram vanadium steel milling bits
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Edge cutter with pin 6.4mm
2 x	TIP SPT-4
1 x	Blade for Wood and Plastics
1 x	Tungsten carbide cutter 1.0mm
1 x	MICROFLAM gas soldering set MGS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Conj 5 pinças ESD
1 x	6pcs Double Open End wrench set
3 x	Inpection mirror 1-978
2 x	Rebating cutter 6.4mm
1 x	ESD-handling ser 9-361
2 x	Slot cutter 3.2mm
2 x	Self-adhesive white corundum sanding discs for TG 250/E
4 x	Tungsten Carbide Tipped (TCT)
1 x	Silicon-Carbide.
1 x	TIP SPT-10
1 x	Slot cutter 6.5mm
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	sanding belts for BBS/s Grit 150
2 x	Super safety and specialty bit set, 75-piece
2 x	V-slot cutter 6.5mm
1 x	Supercut jig saw blades of special steel
1 x	Blade for Steel and brass
2 x	Combi cutter 6.5/2.5mm
1 x	Chuck for TBM 220
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	Disc cutters
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Tungsten carbide cutter 3.0mm
2 x	Cutting disc, with reinforcement
1 x	Warding files set, 6pcs
1 x	Milling cutter set (6 - 10mm)
1 x	Grinding and Polishing Machine SP/E
2 x	TIP SPT-2
1 x	ESD-handling set
1 x	Solid carbide stylus for engraving
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	sandpaper for PS 13 Grit 240
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Angle polisher WP/E
1 x	TIP SPT-9
2 x	Blade holders for DS 460
1 x	Inspector mirror
1 x	Cylinder sander WAS/E
1 x	TIP SPT-6
2 x	Rounding over cutter 6.4mm
1 x	TIP SPT-3
1 x	sandpaper for PS 13 Grot 180
1 x	Cylinder shaped milling cutters
1 x	Jig saw blades made of HSS
2 x	Core box bit 3.2mm
1 x	Solid carbide stylus for engraving
1 x	Cylindrical cutters
1 x	Half round cutter 13mm
1 x	Slot cutter 5.0mm
1 x	Tungsten carbide cutter 2.0mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Footswitch FS
2 x	10-piece wood router cutter set
1 x	Blade guides separately
1 x	Universal and oil siphoning pump AP 12
1 x	Lathe tools 10mm pastilhados
1 x	Hand magnifier with LED light 3X
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
3 x	Disc Sander TG 125/E
1 x	Angle cutter 45 °
1 x	Spare cutting wire
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Delta sander OZI/E
2 x	Bench Circular Saw KS 230
1 x	Scroll saw DS 230/E
1 x	MICROMOT drill stand MB 200
1 x	Diamond Cutting Discs
1 x	Table Saw FET
1 x	Contact bracelet with spiral cord
1 x	Precision lathe PD 250/E
1 x	Corundum grinding disc for LWS
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Collet Set for accurate use on round components
1 x	Diamond blade
1 x	Diamond-coated cutting and roughing disc
1 x	Sanding pads for OZI 220/E grit 150
1 x	Ball-shaped diamond coated 1.2mm
1 x	Sanding pads for OZI 220/E grit 80
1 x	Three-jaw steel drill chuck
1 x	Crocodile clip
1 x	Belt sander BS/E
1 x	MICRO woodturning lathe DB 250
1 x	Sanding fleece for LWS

€5,018.53

Quick Find

We Accept

Manufacturer Info


-	PROXXON Homepage
-	Other products

What's New?

Grinding mop cylinder grit 80
€8.33

Languages

Share Product

Cutting tools of high quality cobalt HSS steel, ground	Conjunto de três brocas de ponto	Drill chuck with sliding sleeve for the tailstock
Independent four jaw chuck for the DB 250	MICRO woodturning lathe DB 250	MICRO shaper MP 400

€42.27 + VAT

Three jaw chuck for the lathe DB 250
[27026]

€42.27 + VAT

Three jaw chuck for the lathe DB 250[27026]

Three jaw chuck for the lathe DB 250
[27026]