€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Replacement cutting wire for the THERMOCUT 12/E
Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Sanding Discs
1 x	Flexible silicon discs
2 x	Side cutters 195mm
1 x	Combination pliers 210mm
1 x	Combination pliers 190mm
1 x	Flexible silicon discs
1 x	Angle polisher WP/E
1 x	Flat nose pliers 160mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Edge cutter with pin 6.4mm
2 x	Precision Vice FMZ
1 x	Mini side cutters EUROline-Conductive
1 x	machine base with shelves for D250X550
1 x	End side cutters EUROline-Conductive
1 x	Grinding mop cylinder grit 120
1 x	Broca de ponto 5.00 x 2.00
1 x	Broca de ponto 3.15 x 1.00
1 x	Mini side cutters EUROline-Conductive
1 x	Tool holder type D for SWH 1-A
1 x	Machine Vice MS 4
1 x	Tungsten carbide drills Ø1mm
1 x	Multipurpose Vices Primus 75
1 x	Multipurpose Vices Primus100
1 x	10-piece wood router cutter set
1 x	Angle cutter 45 °
1 x	ACCENT SERVICE TOOLS SET
1 x	Precision quick-action drill chuck 0-10mm B16
2 x	HSS drill bits 1.2mm
2 x	Super safety and specialty bit set, 75-piece
1 x	Core box bit 3.2mm
1 x	Mini side cutters EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
2 x	Screwdriver bit set. 49-piece.
1 x	Slot cutter 3.2mm
1 x	Polishing machine PM 100
1 x	Hot wire cutter THERMOCUT 650
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Collet chuck ER32 for D250X550
1 x	Nylon Fleece Brushes
1 x	sandpaper for PS 13 Grot 180
2 x	High quality corundum grinding bits
1 x	Lathe System PD 400
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	sanding belts for BBS/s Grit 240
1 x	MICRO shaper MP 400
1 x	TU 2404
1 x	Independent four jaw chuck for the DB 250
1 x	Hand magnifier with LED light 3X
1 x	Fine dust paper filter for CW-matic
1 x	Universal holder UHZ
1 x	High quality corundum grinding bits
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
3 x	Cutting disc, with reinforcement
1 x	MICRO Band Saw MBS 240/E
1 x	Sanding pads for OZI 220/E grit 240
1 x	Precision lathe PD 250/E
1 x	Tweezer teflon-coated 5-107-9
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Rebating cutter 6.4mm
1 x	Fixed Steady
1 x	Centre Turning Attachment
1 x	Diamond Twist Drills
1 x	Diamond cutting blade for OZI
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Precision steel vice PM 40
1 x	Crimping plier for BNC
1 x	Fibre-Cut Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	TIP SPT-3
1 x	Flexible silicon discs
1 x	Professional polishing sponge
1 x	MICRO Heat gun MH 550
1 x	Tungsten Carbide Tipped (TCT)
1 x	Corundum fan sander for LWS
1 x	Milling cutter set (6 - 10mm)

€7,995.21