€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	SmartProg2
1 x	Metal Cutting Blades
1 x	Grinding and Polishing Machine SP/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Super-fine sanding discs grain 2000
1 x	High quality corundum grinding bits
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
3 x	Grinding mop cylinder grit 120
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Corundum sanding discs for LWS
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	HSS drill bits 1.6mm
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	sanding belts for BBS/s Grit 240
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Microfibre cloth
2 x	Independent four jaw chuck for the DB 250
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Mill/Drill Unit BFB 2000.
2 x	Corundum fan sander for LWS
1 x	Edge cutter with pin 6.4mm
3 x	Diamond-coated cutting and roughing disc
1 x	Tungsten carbide cutters set
2 x	MICROMOT drill stand MB 200
1 x	HSS drill bits 0.5mm
3 x	sandpaper for PS 13 Grot 180
2 x	Grinding mop cylinder grit 120
2 x	Blade for Steel and brass
2 x	Super-fine sanding discs grain 000
1 x	Diamond Cutting Discs
1 x	Flexible silicon discs
2 x	Diamond blade for MBS 240/E
2 x	Fluted filter for CW-matic
3 x	Footswitch FS
1 x	Fibre-Cut Discs
1 x	Sanding bands 14x13mm
4 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT steel collet set
2 x	Flexishaft MICROMOT 110/P
2 x	Corundum grinding disc for LWS
4 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Flexible silicon discs
1 x	Tungstein carbide rasp - and cutting disc
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Gear Chuck
1 x	Grinding mop cylinder grit 80
1 x	Super safety and specialty bit set, 75-piece
2 x	Blade holders for DS 460
3 x	sandpaper for PS 13 Grit 400
1 x	Tungsten carbide drills Ø2mm
1 x	sanding belts for BBS/s Grit 150
1 x	Crosscut 'Super-Cut' blade
1 x	Tool holder for rotary tools
5 x	Backing disc for LWS
1 x	Slot cutter 3.2mm
1 x	Nylon Fleece Brushes
1 x	Blade for Wood and Plastics
1 x	Tungsten tipped saw blade
1 x	Supercut jig saw blades of special steel
2 x	Polishing felt, medium hard
1 x	Three-jaw steel drill chuck
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	HSS drill bits 0.8mm
1 x	Thicknesser DH 40
1 x	Sanding Drums
1 x	Sanding fleece for LWS
1 x	Hot wire cutter THERMOCUT 12/E
2 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Fixed Steady
1 x	Protective device for hand-operated MICROMOT
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Three jaw chuck for the lathe DB 250
1 x	Slot cutter 6.5mm
1 x	High quality corundum grinding bits
1 x	sanding belts for BBS/s Grit 80
2 x	Drill chuck with sliding sleeve for the tailstock
3 x	Collet Set for accurate use on round components
2 x	Spiral blade. 125mm long with plain ends (without pins).
3 x	Corundum bound cutting disc for LWS
1 x	Sanding Discs
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Professional set for finish grinding and polishing
1 x	Precision steel vice PM 40
1 x	MICROMOT tool holder
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Jig saw blades made of HSS
1 x	Rounding over cutter 6.4mm
1 x	High quality corundum grinding bits
1 x	Sanding Drums
1 x	Machine Vice MS 4
1 x	Tungsten carbide drills Ø1,5mm
1 x	Grinding mop cylinder grit 240
1 x	Tungsten carbide drills Ø1mm
1 x	10-piece wood router cutter set
1 x	Felt polishers
1 x	sandpaper for PS 13 Grit 240
1 x	Fibre-Cut Discs
2 x	Four Jaw Chuck
1 x	Flexible polishing pad set
2 x	Diamond Coated
1 x	Aluminium Die-Cast
1 x	Diamond Twist Drills
1 x	Diamond-coated cutting disc for MIC
1 x	Rebating cutter 6.4mm
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Diamond Cutting Discs
2 x	Centre Turning Attachment
1 x	Saw blade made of high-alloy special steel
2 x	Half round cutter 13mm
1 x	Flap Wheels
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Polishing Set
1 x	Sanding bands 14x13mm
1 x	Corundum grinding disc for LWS
1 x	HSS drill bits 1.2mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Replacement belts for BSL 220/E

€4,729.45