Top » Catalog » Torque Screwdriver » 4-562

€189.50 + VAT

TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
[4-562]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 1.5 - 4.0
Scale Nm: 0.50
Fine scale mm: 0.10
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Steady rest for D250X550
1 x	TORX-screwdrivers T10
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	TCMT090204
1 x	Insert LGTN-2
1 x	Tool holder type D for SWH 1-A
1 x	Boring Bar for DCMT 10mm
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Screwdriver bit set. 49-piece.
1 x	MICROMOT drill stand MB 200
1 x	Cutting tool HM 20 mm
1 x	DCMT070204
1 x	3-jaw chuck centrically clamping 125mm
1 x	TORX-screwdrivers T9
1 x	Jig saw STS 12/E
1 x	Insert LGTN-3
2 x	14-piece parallel supports set
1 x	Turning inserts CCMT09T304
1 x	Revolving center with replacement lathe centers
2 x	OPTI BF20L VARIO
1 x	Belt sander BBS/S
2 x	Quick-action tool holder kit SWH AA
1 x	IT 150 - Indirect dividing attachment
2 x	Lathe tools 10mm pastilhados
1 x	Turning inserts SCMT09T304
1 x	Morse taper MT2 - B16
1 x	SCMT060204
1 x	Boring Bar for CCMT
1 x	Lathe System PD 400
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	Delta sander OZI/E
1 x	MICROMOT steel collet set
1 x	Disc Sander TG 125/E
1 x	Broca de alta duração de 2.9mm
1 x	Tungstein carbide rasp - and cutting disc
1 x	sandpaper for PS 13 Grit 400
2 x	Flexishaft MICROMOT 110/BF
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Angle cutter 45 °
3 x	Scroll saw DS 230/E
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Slot cutter 5.0mm
1 x	Corundum fan sander for LWS
1 x	Machine Vice MS 4
1 x	Motor-driven carving device MSG
1 x	Sanding pads for OZI 220/E grit 150
1 x	Corundum sanding discs for LWS
1 x	Precision steel vice PM 40
2 x	Bench Circular Saw KS 230
1 x	Broca de ponto 3.15 x 1.25
1 x	MICRO shaper MP 400
1 x	Multiform grindstone
1 x	Felt polishers
1 x	MICRO woodturning lathe DB 250
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICRO cutter MIC
1 x	Diamond Coated
1 x	Fine dust paper filter for CW-matic
1 x	Long neck angle grinder LHW
1 x	Super jig saw STS/E
1 x	Thicknesser DH 40
1 x	Pensander PS 13
1 x	Collet Set for accurate use on round components
1 x	Diamond-coated cutting disc for MIC
1 x	MICROMOT 50/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Precision drill grinder FBS 12/EF
2 x	Crosscut 'Super-Cut' blade
1 x	Tungsten tipped saw blade
2 x	Metal Cutting Blades
1 x	6-piece screwdriver and cross-recess set
1 x	Grinding mop cylinder grit 120
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	MICRO Miller FF 500
1 x	Long neck angle milling/drilling unit LWB 220/E
2 x	Fibre-Cut Discs
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond blade
1 x	Collet chuck ER32 for D250X550
1 x	Sanding Discs
1 x	Milling cutter set (2 - 5mm)
1 x	MICRO Band Saw MBS 240/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Cutting tool 10 mm
1 x	Tool holder type H for SWH 1-A
1 x	Micro Compound Table KT 70
1 x	MICRO Miller MF 70
1 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
1 x	MICROMOT 50/EF
1 x	Five piece HSS chisel set
1 x	Table Saw FET
1 x	HSS drill bits 1.2mm
1 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
1 x	Diamond Cutting Discs
1 x	Diamond Twist Drills
1 x	Bench drill machine TBM 220
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Polishing paste
1 x	4-jaw chuck individually clamping 125mm
1 x	Cross-recess Screwdrivers 0
1 x	V-slot cutter 6.5mm
1 x	Cross-recess Screwdrivers 2

€15,302.10