Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Replacement cutting wire for the THERMOCUT 12/E
Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Four Jaw Chuck
1 x	Felt polishers
1 x	Polishing machine PM 100
2 x	Glass fibre contact cleaner brush
1 x	Flexible silicon discs
1 x	Grinding mop cylinder grit 120
1 x	Crosscut 'Super-Cut' blade
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Chuck for TBM 220
1 x	Bench Circular Saw KS 230
1 x	HSS twist drill set with centring pin
1 x	MICROMOT tool holder
1 x	Independent four jaw chuck for the DB 250
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Cut off/mitre saw KGS 80
1 x	Fibre-Cut Discs
1 x	14-piece parallel supports set
1 x	Machine Vice MS 4
1 x	Combi cutter 6.5/2.5mm
1 x	Fibre-Cut Discs
1 x	Blade guides separately
1 x	MICRO Miller FF 230
1 x	Long neck straight drill/grinder LB/E
1 x	Diamond blade
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	HSS boring tool set, 6 pieces
2 x	MICRO Miller FF 500
2 x	Flap Wheels
1 x	Engraving tool GG
2 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed (10 TPI per 25mm)
3 x	Gear Chuck
1 x	Complete Engraving Kit with trial glass
2 x	Disc Sander TG 250/E
2 x	MICRO Band Saw MBS 240/E
3 x	Centre Turning Attachment
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	MICRO shaper MP 400
1 x	Spare cutting wire
1 x	Fibre-Cut Discs
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Flame shaped milling cutters
1 x	Step clamps made of steel
1 x	Sanding bands 14x13mm
1 x	Solid carbide saw blade
1 x	Sanding Drums
1 x	Professional polishing sponge
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Felt polishers
1 x	Fine dust paper filter for CW-matic
1 x	Micro Compound Table KT 70
1 x	MICRO Miller MF 70
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Jig saw blades made of HSS
3 x	Collet Set for accurate use on round components
1 x	Flexishaft MICROMOT 110/P
2 x	Dividing attachment TA 230 for PF 250
1 x	sanding belts for BBS/s Grit 80
1 x	Steel wheels
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Mill/Drill Unit BFB 2000.
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Felt polishers
1 x	Edge cutter with pin 6.4mm
1 x	Sanding fleece for LWS
1 x	Lambswool polishing disc
1 x	Footswitch FS
1 x	High quality corundum grinding bits
1 x	Screwdriver bit set. 49-piece.
1 x	Tungsten tipped saw blade
1 x	Ball shaped milling cutters
1 x	Replacement belts for BSL 220/E
1 x	Tool holder for rotary tools
1 x	MICRO cutter MIC
1 x	sanding belts for BBS/s Grit 150
1 x	Flap Wheels
1 x	Multipurpose Vices Primus 75
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Lathe System PD 400
1 x	Universal and oil siphoning pump AP 12
1 x	MICROMOT extension cord. 300cm.
1 x	sanding belts for BBS/s Grit 240
1 x	Wolfram vanadium steel milling bits
1 x	Milling cutter set (2 - 5mm)
1 x	Table Saw FET

€12,942.30