Broca de alta duração de 2.3mm, Oficina-digital.com

Top » Catalog » Drills » Drills Tungsténio » hss2.3

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
drill
Drills Tungsténio
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	MICRO cutter MIC
2 x	Delta sander OZI/E
1 x	Sanding pads for OZI 220/E grit 240
2 x	Cylinder sander WAS/E
1 x	Polishing Set
1 x	Fine dust paper filter for CW-matic
1 x	Sanding pads for OZI 220/E grit 150
2 x	Disc Sander TG 125/E
3 x	Bench Circular Saw KS 230
1 x	Disc Sander TG 250/E
2 x	Scroll saw DS 230/E
1 x	MICRO woodturning lathe DB 250
1 x	Independent four jaw chuck for the DB 250
3 x	Belt sander BS/E
2 x	Super jig saw STS/E
1 x	Cut off/mitre saw KGS 80
2 x	Diamond cutting blade for OZI
1 x	Special Fused Alumina (Hardness N).
1 x	MICRO shaper MP 400
1 x	Polishing machine PM 100
2 x	Table Saw FET
1 x	Silicon-Carbide.
1 x	Sanding pads for OZI 220/E grit 80
2 x	sandpaper for PS 13 Grot 180
2 x	MICRO Band Saw MBS 240/E
1 x	Jig saw STS 12/E
2 x	Surface planer AH 80
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Pensander PS 13
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Motor-driven carving device MSG
2 x	Long neck angle grinder LHW
3 x	sandpaper for PS 13 Grit 400
1 x	Grinding and Polishing Machine SP/E
3 x	sandpaper for PS 13 Grit 240
2 x	Belt sander BBS/S
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	HSS immersion saw blades for OZI
1 x	Angle polisher WP/E
2 x	V-slot cutter 6.5mm
1 x	High quality corundum grinding bits
1 x	HSS drill bits 0.5mm
1 x	MICRO Miller MF 70
1 x	Diamond Coated
2 x	Core box bit 3.2mm
1 x	Solid carbide stylus for engraving
3 x	Super-Cut
1 x	Protective device for hand-operated MICROMOT
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	Super safety and specialty bit set, 75-piece
1 x	Set of precision cutters
1 x	TUNER 200ml
2 x	Edge cutter with pin 6.4mm
2 x	MICROMOT drill stand MB 200
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	Screwdriver bit set. 49-piece.
3 x	Tungsten Carbide Tipped (TCT)
2 x	Slot cutter 3.2mm
1 x	HSS drill bits 1.0mm
2 x	Tungsten carbide drills Ø2mm
2 x	Warding files set, 6pcs
2 x	Diamond Cutting Discs
3 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
3 x	Replacement cutting disc for MICRO cutter MIC
2 x	HSS drill bits 0.8mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Slot cutter 5.0mm
3 x	10-piece wood router cutter set
2 x	HSS drill bits 1.2mm
1 x	Replacement belts for BSL 220/E
1 x	Three piece thread cutting set
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Sanding Discs
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Dividing attachment TA 230 for PF 250
1 x	Disc cutters
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	MICROMOT steel collet set
1 x	Rebating cutter 6.4mm
3 x	Universal holder UHZ
3 x	Blade holders for DS 460
2 x	MICRO Heat gun MH 550
2 x	Tungsten carbide drills Ø1,5mm
1 x	Tungsten carbide drills Ø1mm
1 x	Hot wire cutter THERMOCUT 650
1 x	Wolfram vanadium steel milling bits
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Sanding fleece for LWS
1 x	Flexishaft MICROMOT 110/BF
3 x	Router base OFV
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Super-fine sanding discs grain 2000
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Fibre-Cut Discs
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Machine Vice MS 4
1 x	Universal polishing paste
1 x	Tungsten carbide cutter 3.0mm
1 x	Sanding Drums
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Milling cutter set (2 - 5mm)
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Conjunto de três brocas de ponto
1 x	Cone shaped milling cutter
1 x	Cutting disc, with reinforcement
1 x	Sanding fleece for LWS
1 x	Milling cutter set (6 - 10mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Lambswool polishing disc
1 x	Flexible silicon discs
1 x	Sanding Drums
1 x	HSS twist drill set to DIN 338
1 x	Solid carbide stylus for engraving
2 x	Complete Engraving Kit with trial glass
1 x	HSS cutting blade for OZI
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Super-fine sanding discs grain 400
1 x	Ball shaped milling cutters
1 x	IC tweezers
1 x	Mill/Drill Unit BFB 2000.
1 x	Diamond Twist Drills
1 x	Super-fine sanding discs grain 000
2 x	Fibre-Cut Discs
2 x	Aluminium Die-Cast
2 x	Rounding over cutter 6.4mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
2 x	Slot cutter 6.5mm
1 x	MICROMOT tool holder
3 x	MICRO-screwdrivers
1 x	2-speed scroll saw DSH
1 x	Corundum bound cutting disc for LWS
1 x	HSS drill bits 1.6mm
2 x
1 x	Flexible silicon discs
1 x	14-piece parallel supports set
1 x	SPRAYFLON 200ml
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MULTI 200ml
2 x	MICROFLAM gas soldering set MGS
2 x	Angle cutter 45 °
1 x	Ball-shaped diamond coated 3.2mm
1 x	Brass contact cleaner brush
1 x	VASELINE 200ml
1 x	Glass fibre contact cleaner brush
2 x	MICROMOT glue gun HKP 220
1 x	Half round cutter 13mm
1 x	Engraving tool GG
1 x	Ball-shaped diamond coated 2.2mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	Multiform grindstone
1 x	Inpection mirror 1-978
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Fibre-Cut Discs
1 x	Diamond Cutting Discs
1 x	MICROFLAME burner MFB/E
1 x	Glass fibre contact cleaner brush
1 x	Inspector mirror
1 x	PROLUB 200ml
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	PROTECTION 200ml

€10,572.52