Top » Catalog » Drilling-milling machine » End mill » 3350213

€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Tungsten Carbide Tipped (TCT)
2 x	MICROMOT tool holder
2 x	Lathe System PD 400
1 x	Cross-recess Screwdrivers 00
2 x	14-piece parallel supports set
2 x	OPTI BF20L VARIO
1 x	Sanding bands 14x13mm
1 x	Three piece thread cutting set
1 x	IC Test clip 20 pins
1 x	Aluminium Die-Cast
1 x	Protective device for hand-operated MICROMOT
2 x	MICROMOT extension cord. 300cm.
1 x	Diamond Grinding Bits 1,8mm
1 x	Ball-shaped diamond coated 1.2mm
1 x	HSS drill bits 1.0mm
1 x	HSS drill bits 0.5mm
1 x	HSS drill bits 1.2mm
1 x	HSS drill bits 1.6mm
1 x	HSS drill bits 0.8mm
1 x	Pinça SOIC de 8 pinos
1 x	Mill/Drill Unit BFB 2000.
1 x	Metal Cutting Blades
2 x	MICROMOT drill stand MB 200
1 x	Diamond Grinding Bits 1mm
1 x	High quality corundum grinding bits
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Micro Compound Table KT 70
1 x	Flexishaft MICROMOT 110/BF
1 x	Cross-recess Screwdrivers 0
1 x	Sanding Discs
1 x	Diamond Twist Drills
1 x	Dividing attachment TA 230 for PF 250
1 x	Sanding Drums
1 x	Tungsten carbide drills Ø2mm
1 x	Footswitch FS
1 x	Jig saw blades made of HSS
2 x	Precision lathe PD 250/E
1 x	Component tweezers 5-008
1 x	Precision steel vice PM 40
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Blade holders for DS 460
2 x	Super-fine sanding discs grain 2000
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Polishing felt, medium hard
1 x	Sanding fleece for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Supercut jig saw blades of special steel
1 x	Cutter head for copy and surface milling MT3
2 x	Replacement belts for BSL 220/E
1 x	HSS boring tool set, 6 pieces
1 x	Boring Bar for DCMT 10mm
2 x	Super-fine sanding discs grain 400
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
3 x	Replacement belts for BSL 220/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	sandpaper for PS 13 Grit 400
2 x	Super-fine sanding discs grain 000
1 x	Parting tool 10mm
1 x	Backing disc for LWS
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Lambswool polishing disc
1 x	Crimping plier for BNC
1 x	sclcr2525M12
1 x	Diamond Cutting Discs
2 x	Machine Vice MS 4
2 x	Replacement belts for BSL 220/E
1 x	Component tweezers 5-009
1 x	Professional set for finish grinding and polishing
1 x	Sanding fleece for LWS
1 x	sandpaper for PS 13 Grit 240
1 x	Component tweezers 5-013
1 x	Morse taper MT2 - B16
1 x	TU 2404
1 x	Flap Wheels
1 x	Boring Bar for CCMT
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Super-Cut
1 x	Microfibre cloth
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Boring Bar for CCMT 16mm
1 x	MICRO Miller FF 230

€16,257.18